User's Manual

ManualsBrandsInnoSenT ManualsElectronicsK-Band Transceiver

and manufactured

in Germany

designed

Innovation in Radar Technology

User Manual

CONFIDENTIAL AND PROPRIETARY

The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be

disclosed by the recipient to third parties without prior consent of InnoSenT in writing.

Page 1 USER MANUAL IPS-355 Version 1.0

PRODUCT FAMILY

APPLICATIONS

FEATURES:

DESCRIPTION

ADDITIONAL INFORMATION

InnoSenT Standard Product. Changes will not be

notiﬁed as long as there is no inﬂuence on form,

ﬁt and within this user manual speciﬁed function of

the product.

RoHS-INFO

This product is compliant to the restriction of

hazardous substances (RoHS - European Union

directive 2011/65/EU).

CERTIFICATES

InnoSenT GmbH has established and applies a

quality system for: development, production and

sales of radar sensors for industrial and automotive

sensors.

Version

https://www.innosent.de/en/company/certiﬁcations/

The IPS-355 is a K-Band Transceiver with a split

transmit and receive antenna.

Certiﬁcates available on request

1.0 - 19.02.2019

IPS-355 (UXS-IPS355)

K-Band Transceiver

• Door Opener

• Industrial Applications

Movement

Velocity

Direction

Presence

Distance

Angle

» radar-based motion detector working in the 24GHz - ISM - Band

» split transmit and receive path for maximum gain

» IF-pre-ampliﬁer, bandwith limited for lowest noise performance

» stereo (dual channel) operation for direction of motion indentiﬁcation

» compact outline dimensions

Summary of content (7 pages)

PAGE 1
Innovation in Radar Technology User Manual IPS-355 (UXS-IPS355) designed and manufactured in Germany Version 1.0 - 19.02.
PAGE 2
Innovation in Radar Technology ELECTRICAL CHARACTERISTICS PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITS 24.250 GHz 12.7 dBm Transmitter transmit frequencies frequency band for US and EU fIPS-355 24.150 temperature drift (frequency) t.b.d. output power (EIRP) 11.6 Pout transmitter turn on time 10 µs Receiver IF-Bandwidth (-3dB) B signal level (RSC= 8.4 * 10-4 m2) IF t.b.d. mV N1/2 t.b.d. mVrms noise level 100Hz... 1kHz IF voltage offset IFDC-offset 0 1 1 2.
PAGE 3
Innovation in Radar Technology TX- ANTENNA PATTERN vertical Antenna Orientation: antenna horizontal 0 normalized gain [dB] -5 -10 -15 -20 -25 -30 -35 -120,0 -90,0 -60,0 -30,0 0,0 30,0 60,0 90,0 120,0 150,0 180,0 angle [°] PARAMETER full beam width @ -3dB side-lobe suppression CONDITIONS SYMBOL MIN TYP MAX UNITS horizontal 70 ° vertical 36 ° horizontal 13 dB vertical 13 dB CONFIDENTIAL AND PROPRIETARY The information contained in this document shall remain the so
PAGE 4
Innovation in Radar Technology INTERFACE The sensor provides a 2.54mm grid, single row pin header (square pin PIN # DESCRIPTION IN / OUT 0.635mm). COMMENT d.n.c do not connect 2 enable input active low, the enable pin is used to switch off the power supply of the OSC enable on: 0 - 0.8V enable off: 2.8 - 3.3V 3 Vcc input supply voltage, 5V +/- 15% 4 GND input analog ground 5 IF1 output signal I(nphase) 6 IF2 output signal Q(uadrature) 7 d.n.c do not connect 8 d.n.
PAGE 5
Innovation in Radar Technology MECHANICAL OUTLINES top view CONFIDENTIAL AND PROPRIETARY The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be disclosed by the recipient to third parties without prior consent of InnoSenT in writing. Page 5 bottom view USER MANUAL IPS-355 Version 1.
PAGE 6
Innovation in Radar Technology Annex A The information that will be given below is only a rough overview; for details please contact the local approval agencies. An overview over the frequency bands in Europe can also be found in the REC 70-03 (Annex 6) which is available under www.ero.dk Frequency Bands in US FCC 15.249 For the US-market the IPS-355 can be used 24.000 24.250 US-frequency Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 7
Innovation in Radar Technology ESD-INFORMATION This InnoSenT sensor is sensitive to damage from ESD. Normal precautions as usually applied to CMOS devices are sufficient when handling the device. Touching the signal output pins has to be avoided at any time before soldering or plugging the device into a motherboard. APPROVAL This Data Sheet contains the technical specifications of the described product. All previous versions of this Data Sheet are no longer valid. VERSION DATE COMMENT 1.0 19.02.