User's Manual

ManualsBrandsInnoSenT ManualsElectronicsK-Band Transceiver

and manufactured

in Germany

designed

Innovation in Radar Technology

USER MANUAL

CONFIDENTIAL AND PROPRIETARY

The information contained in this document shall remain the sole and exclusive property of InnoSenT GmbH and shall not be

disclosed by the recipient to third parties without prior consent of InnoSenT in writing.

Page 1 USER MANUAL IPM-165_F Version 8.3

PRODUCT FAMILY

APPLICATIONS

FEATURES:

DESCRIPTION

ADDITIONAL INFORMATION

InnoSenT Standard Product. Changes will not be

notiﬁed as long as there is no inﬂuence on form, ﬁt

and within this datasheet speciﬁed function of the

product.

RoHS-INFO

This product is compliant to the restriction of

hazardous substances (RoHS - European Union

directive 2011/65/EU).

CERTIFICATES

InnoSenT GmbH has established and applies a

quality system for: development, production and

sales of radar sensors for industrial and automotive

sensors.

Version

The IPM-165 is a 24GHz Doppler module with an

asymmetrical wide beam for detection of moving

objects.

Low power consumption components are quickly

enabled supporting duty cycles for battery or solar

panel operation.

Certiﬁed and approved according to

• ETSI EN 300 440

• FCC part 15.245

8.3 - 24.10.2013

IPM-165_F

Low Cost K-Band Transceiver

• Security applications

• Door openers

• Industrial applications

Movement

Velocity

Direction

Presence

Distance

Angle

» radar-based motion detector working in the 24GHz - ISM - Band

» available in different frequency ranges for worldwide use

» advanced LCO-oscillator with low current consumption

» split transmit and receive path for maximum gain

» very compact outline dimensions

Summary of content (4 pages)

PAGE 1
Innovation in Radar Technology USER MANUAL IPM-165_F designed and manufactured in Germany Version 8.3 - 24.10.
PAGE 2
Innovation in Radar Technology ESD Info This InnoSenT sensor is sensitive to damage from ESD. Normal precautions as usually applied to CMOS devices are sufficient when handling the device. Touching the signal output pins has to be avoided at any time before soldering or plugging the device into a motherboard. ELECTRICAL CHARACTERISTICS PARAMETER CONDITIONS SYMBOL MIN TYP MAX UNITS 24.175 GHz Oscillator transmit frequency1 US-frequency band@ 25°C fF 24.
PAGE 3
Innovation in Radar Technology INTERFACE The sensor provides a 2.54mm grid, single row pin header (square pin 0.635mm) PIN # DESCRIPTION IN / OUT COMMENT 1 VCC input supply voltage (4.75 - 5.25V) 2 IF1 output signal I(nphase) 3 GND input analog ground MECHANICAL OUTLINES 9.96 1.90 antenna PIN 1 20.20 +- 0.20 0.20 12.70 10.50 PIN 1 6.60 +1.00 - 0.20 backside 25.00 +- 0.20 0.20 PIN 1 20.20 +- 0.20 0.20 1.25 2.54 all dimensions in mm 25.00 +- 0.20 0.
PAGE 4
Innovation in Radar Technology FCC approval Changes or modifications made to the equipment not expressly approved by InnoSenT GmbH may void the FCC / IC authorization to operate this equipment. The use of the transceiver module is authorized in mobile or fixed host devices taking into account the conditions listed below: • OEM Integrator must ensure that the end user manual may not contain any information about the way to install or remove the module from the final product.