Installation Instructions
Table Of Contents
The installation position
is for reference only
(fixed with 3M glue)
The installation position
is for reference only
(fixed with 3M glue)
Door installation instructions Window installation instructions
The Zigbee door sensor switch, also named door sensor detector, senses the switch status of doors and windows by
detecting the proximity and separation of the magnet, and sends an alarm signal to the Zigbee gateway through the
Zigbee communication protocol. This product is suitable for household residences, buildings and villas, factories,
shopping malls, office buildings, etc. An example of product appearance is shown in Figure 1.
• Real-time monitoring of door and window switching conditions, and an alarm
will be generated immediately when the opening and closing conditions
are met.
• Two-way communication with Zigbee gateway via Zigbee 2.4GHz.
• With low voltage alarm function, synchronously upload battery power status.
• Support bottom tamper alarm function.
• With status display LED lights.
• Low power consumption design, long standby time, stable and reliable.
•Support the function of battery icon prompt when the battery power is low.
Product Model:EC92
Product number:PB0092BZ00/01/02/03/XX
Product Size:60*23*13mm & 36*14*13mm
Operating Voltage:DC 3V
Working current:Standby current≤5μA; alarm current≤25mA
Communication Protocol:Zigbee 2.4G
Transmission distance:≤130m(open visual distance)
Action distance:>17mm(open)/ <17mm(close)
Alarm Output:Report to Zigbee gateway
Installation method:3M Wall Mount Wall Sticker
Battery Type:Button battery CR1632*2
Working temperature:-10℃~55℃
Working humidity:≤95%(no condensation)
1.Select a suitable installation location and fix it with 3M adhesive tape. The product can be installed on doors,
windows, etc., as shown in Figure2 .
Features
Technical parameters
Installation Notes
Magnetic Door Switch
figure 1
figure 2