User's Manual

Product guide
This symbol indicates safety and health hazards specified in the product guide
and other product instructions. Read important safety and health information
that applies to INNOPRESSO® devices.
WARNING: Improper installation, use, or careless handling of the product can
cause serious injury, death, or damage of the device.
Important safety information
1. Device using battery power
The following precautions apply to every product that uses rechargeable or disposable batteries.
Improper use of batteries may cause electrolyte leakage, overheating or explosion. Leaked battery electrolyte is
corrosive. Therefore, it may be toxic. Skin or eye contact may cause burns. It is harmful if swallowed.
2. To reduce the injury risks
· Keep the battery out of children’s reach.
· Do not disassemble, heat, cut, incinerate, or pierce the battery with sharp objects.
· Do not mix up the battery with new batteries, used batteries, or different types of batteries
(i.e. zinc-carbon batteries and alkaline batteries).
· Do not allow metal objects to reach the battery terminals of the device. It may cause overheating and burns.
· Disconnect the battery from the device if the device has not been used for a long time or when the battery is expired.
· Expired batteries must be immediately removed from the device and recycled or disposed of in accordance
with local or international waste treatment regulations.
· Remove all batteries if one of the batteries is leaked and make sure that the electrolyte leaking from the battery does
not get on your skin or clothing. If electrolyte from the battery gets on your skin or clothing, immediately wipe it off
with water. Before putting in new batteries, wipe the battery compartment thoroughly with a paper towel moistened
with water or clean it using the method recommended by the battery manufacturer.
3. Wireless device
Remove the battery or turn off the power (if there is a power switch) of the wireless device before you go on a plane
or put the wireless device on cargo that passes through an airport security checkpoint. When the wireless device is
accidently powered on with the battery in place, it will send a radio frequency (RF) signal just like a cell phone.
4. Game controller, keyboard and mouse device
[Health Information]
The use of game controller, keyboard, mouse, and other electronic input devices can lead to serious injuries or
disabilities. If you use your computer for too long, you may feel uncomfortable on your hands, arms, shoulders,
throat, or other parts of the body. Do not take these issues lightly if such discomforts, pain, stiffness, soreness or
paralysis continue or occur repeatedly. If symptoms persist even while you are not working on the computer,
consult a medical specialist immediately. Such symptoms can cause pain in the nerves, muscles, tendons or other
parts of the body, which can lead to permanent injury or disability to the musculoskeletal system. Examples of
musculoskeletal disorders (MSD) include carpal tunnel syndrome, tendinitis, and aponeurositis. The direct cause of
MSD has not been found yet, but it is known to be related to individual's health and physical conditions, stress,
how to relieve stress, habits while working on a computer, posture (including mouse and keyboard use), and work
time. Consult a medical specialist about your lifestyle, activities, or your physical and health conditions.
[Photosensitive epilepsy]
A very small number of people get a seizure when they are exposed to flashing lights, or visual images such as a
wooden pattern in video games. Even those without the history of seizure or epilepsy can also experience such
"photosensitive epilepsy" for unknown reasons while playing video games. Photosensitive epilepsy has a variety of
symptoms, such as dizziness, hallucinations, eye twitching or face convulsions, spasms or tremors in the arms or
legs, loss of direction, delirium, and temporary loss of consciousness. In addition, seizures can lead to
unconsciousness or convulsions that can throw down or hit nearby objects. If you experience any of these
symptoms, stop playing the game immediately and consult a medical specialist. Because children and adolescents
are more prone to seizures than adults, parents should see if their child has any of these symptoms. To reduce the
risk of photosensitive epilepsy, take the following precautions.
· Keep a distance from the TV screen.
· Use a small screen TV.
· Play games under bright lights.
· Do not play games when you are tired or drowsy
If you or your relatives have a history of seizures or epilepsy, consult a medical specialist before playing a game.
[Prohibition of disassembly and self-repair]
Do not disassemble, disseminate, repair, or alter this product. There is a danger of electric shock.
If there is any evidence of disassembly and / or alteration of the device, including label damage or removal,
it will void the Limited Warranty.
[Choking hazard]
Keep the small parts contained in this device out of the reach of toddlers
under the age of three due to choking hazards.
[Usage and cleaning]
Use the device in accordance with following instructions.
· Do not use the device near a heat source.
· Use the components or accessories designated by INNOPRESSO.
· Use a dry cloth for cleaning.
· Do not allow water to enter the product. Do not expose the product to rain, humidity, or moisture
to reduce the risk of fire or electric shock.
5. Tablet stand
Do not pull up the tablet stand excessively to the point it falls in order to prevent damage
to the device mounted to tablet stand.
6. Regulatory Information
Do not use the device for mechanical, medical or industrial applications.
If you make changes or modifications not expressly approved by INNOPRESSO, it may void the user's authority to
operate the device. This product is intended for use in NRTL registrations (UL, CSA, ETL, etc.) and / or IEC / EN 60950-1
compatible (CE marked) information technology device. Parts that are subject to service support are not included.
The device is classified as a commercial product operating from 5°C~35°C (41°F~95°F). To comply with RF exposure
requirements, do not move or remove antennas installed by the manufacturer.
Do not use the wireless device with any other types of antennas or transmitters or place near them. Antennas and
body of the wireless device, except for headsets or hand-held devices must be at least 20cm apart.
Limited Warranty
Read the following content carefully and understand your rights and obligations.
"Hardware Device" means the INNOPRESSO® hardware products. "You" means an individual or a single corporate
body. "Software" means the software provided by INNOPRESSO to use with the hardware device and may include
approved upgrades or additional components provided by INNOPRESSO, such software, such as media (including
copies), printed materials, "online" or electronic documentation
Register frequently used functions as shortcut keys. Components
· Slide up the button on the back of the keyboard to ON to turn on the power.
Once the power is on, it is automatically connected to last device connected
· Slide down the button on the back of the keyboard to OFF to turn off the power.
ⓒ 2019 INNOPRESSO, INC., All right reserved.
Visit Mokibo website. The following information is provided.
User Manual | Software Update | Warranty Service
Scan a QR code on the left or click on the web address www.mokibo.com/service
1. Never remove the keycap.
2. Keep out of contaminants such as powder or liquid.
3. Do not apply pressure by twisting or bending. Do not disassemble the product.
4. Do not use in hot or humid places
The warranty may not apply to malfunctions resulting from negligence.
Precautions for use
Charging cable
keyboard
manual
WindowsCombination key Android Apple
View desktop
Program switching
Turn down the volume
Turn up the volume
Go back
-
Home button Home button
Program switching Program switching
Turn down the volume Turn down the volume
Mute Mute Mute
Turn up the volume Turn up the volume
Go back Go back
Search Search Search
- Virtual keyboard
Screen capture Screen capture Screen capture
Screen lock Screen lock Screen lock
The LED lights will be on according to the remaining battery power.
Red (0~20%), Yellow (20~70%), Green (70~100%)
· Touch on the click button of the lower part of the keyboard with your finger.
Then the LED will be on and the entire surface of the keyboard will become
a touchpad. Press the click button and use a mouse without a touchpad.
Remove your finger from the click button,
then the LED will be off and the keyboard mode will be back on.
· Press the button
The LED will be on and the entire surface of the keyboard will become a touchpad.
· Press the button again.
The LED and the touchpad mode will be off and the keyboard mode will be back on.
Use the power switch on the back of the keyboard
to turn on the power.
Quick switch between the keyboard mode
and the touchpad mode.
Touchpad-only mode available.
Three Bluetooth devices can be connected simultaneously.
Select the keyboard layout that matches
the OS of the connected device.
· Press one of the keys for 2 seconds,
then LED will be flickering, which means it is ready to pair.
Select Mokibo among the list of Bluetooth devices to connect.
· After the initial pairing, the connected device can be changed by shortly pressing
one of the keys.
· Press one of the keys to select the keyboard layout
for the connected devices Windows, Android, or Apple.
· The layout is auto-saved and there is no need to set up every time
unless the device is changed.
Read this product guide and keep all of your printed guide materials for future reference.
If you need more information, please visit www.innopresso.com or www.mokibo.com/service or contact us.
Model Name: MKB316-GB | Components: Mokibo, charging cable, instruction manual
Size: 260mmx130mmx6mm (LxWxH) | Weight: 240g | Charging method: USBMicro5 pin | Battery: 3.7V, 2.18Wh
Wireless protocol : Bluetooth 4.0, 2.4Ghz Wireless | Bluetooth4.0 Range: 10m
Compatibility: Android 4.0+, Windows 10+, MacOS 9+
The contents and perspectives of this instruction manual, including URLs and website references may change
without notice. This manual does not grant you any intellectual property rights of INNOPRESSO products. This
document may be copied for internal use and for reference.
MokiboTM and INNOPRESSOTM are registered trademarks of INNOPRESSO, Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
All the other trademarks are the property of their respective owners.
Korea Electromagnetic Compatibility Registration
This device has been registered as the electromagnetic compatible device that can be used everywhere
including residential areas. When using frequencies within the 2,400MHz to 2,410MHz band, there is a possibility
of interferences with radio equipment using frequencies within the 2,390MHz to 2,400MHz band.
Korean Format Registration Information (for wireless products)
Life safety services are not available due to the possibility of radio interference.
Disposal of Waste Batteries and Waste Electrical and Electronic Equipment (WEEE)
If a product, battery, or package has this sign on it, do not dispose of the product and its batteries together with
household waste. Instead, dispose of such items at your local battery, electrical and electronics recycling collection
point. Separate collection and recycling can help save resources and can help protect your health and the
environment from harmful substances that may remain in batteries, electrical and electronic devices.
For proper disposal of batteries and electrical and electronic waste, contact your local city hall office
or the town /township /village office, your household waste disposal service company or the store where you
purchased the product. Please contact [e-mail], for more information on WEEE (waste electrical
appliances) and waste batteries.
INNOPRESSO Hardware Customer Support Service
If you have questions about INNOPRESSO's hardware products, read the instructions or help.
If you have any questions about INNOPRESSO's hardware product information and technical support services,
please contact our customer support center to check the problem and receive the service from the hardware after
sales service center. In order to receive services for the product, you must register as a customer and bring the
receipt with the date of purchase.
[Customer Support Center]
You can call or visit the Customer Support Center at the phone number and address on the INNOPRESSO website
(www.innopresso.com or www.mokibo.com/service) during operating hours, or leave an inquiry by e-mail or on
the bulletin board. If you need to call the Customer Support Center, you need to give us the following information.
· Manufacturer and model name of the product you are using
· The exact message on the screen
· Situation / task you were doing when a problem occured
For product problems that occur during the warranty period, contact the INNOPRESSO Customer Support Center,
not the store where you purchased the product. Services that you may receive after hardware product registration
are available for one year from the date of receipt for software and the period specified in the INNOPRESSO user
right agreement included in the software or manual for hardware. If the product is provided by a PC manufacturer
or purchased under a license agreement, such as INNOPRESSO Select Program, no general support will be
provided. Please contact the store where you purchased the product, or use online services and annual contract
based technical support programs. Information on INNOPRESSO products and service centers may change
without notice. For the latest information on all INNOPRESSO products, please go to Internet services.
http://www.innopresso.com
Technical support numbers by country
Note: For more information on the support policies in your country,
visit http://www.innopresso.com or www.mokibo.com/service and select your country from the list.
If there is no INNOPRESSO subsidiary in your region or country,
contact the store where you purchased INNOPRESSO.
A. Warranty
1. Express Warranty – According to the express warranty conditions, INNOPRESSO guarantees that the software
and hardware will work normally if you follow the disclosed INNOPRESSO packaging and documents for one year
since the day of receipt specified on your receipt. In the case of defects found after the warranty period, no
warranty or condition of any kind shall be applied. The subjective or aesthetic appearance of a hardware device or
software shall not be applied to this Limited Warranty. The foregoing warranty set forth above is the only Express
Warranty provided to you, including but not limited to other express warranties, implied warranties(Except for
implied warranties that cannot be denied), or conditions. No warranties or conditions shall be established by
INNOPRESSO and its agents, affiliates, suppliers, or their staff or agents, in any form (oral or written), and the
scope of this Limited Warranty shall not be extended.
2. Limitations on the period of implied warranty - If you are a consumer, you may be subject to implied warranties
and / or conditions in accordance with the laws of your jurisdictions, which is hereby limited to the warranty period
set forth above. The limitations specified above may not apply to you since some jurisdictions may not allow
limitations on how long implied warranty or conditions persist.
B. The only remedy
INNOPRESSO shall give you a refund or repair parts or all of defective software or hardware devices or
compensate you for your loss based on reasonable calculation in accordance with applicable laws and the
following terms and conditions if you return the software or hardware device with a proof or copy or receipt (in
case the place of purchase refused to return) within the warranty period. However, the amount for compensating
for damages shall not exceed the amount of reasonable depreciation rates based on the amount you paid for the
software and / or hardware device.
G. Additional information
INNOPRESSO shall be a guarantor under this Limited Warranty. Please visit INNOPRESSO website
(www.INNOPRESSO.com or www.mokibo.com/service) for guidance on implementing this Limited Warranty.
You must do the following.
1. Submit a proof of payment, a receipt with a date on it, or a copy of your statement of purchase (or a copy) that
proves that you are the beneficiary of this Limited Warranty and that the remedial request has been made within
the warranty period.
2. If you need to return parts or all of your hardware devices or software, follow INNOPRESSO's shipping policies. If
you wish to fulfill the Limited Warranty, you must ship the product to the place designated by INNOPRESSO in the
original packaging or packaging that can protect the product to the same level. Shipping costs (including
packaging) for warranty services shall be your responsibility unless otherwise required by law in your jurisdiction.
3. You must delete all of your private or confidential files and data before shipping the product to INNOPRESSO.
Failure to follow this instruction may result in delayed or additional charges or voiding of the warranty.
This Limited Warranty shall grant you specific legal rights. Your rights may vary depending on the jurisdiction.
If any of the terms of this Limited Warranty is prohibited by the laws of your jurisdiction, such terms shall be
nullified and void, but the remaining conditions of the Limited Warranty shall remain effective unless the risk
sharing becomes substantially impaired.
H. Governing Law, Independent Jurisdiction
If the hardware device and / or software is purchased in the United States, all of the contents of this agreement
including the Limited Warranty shall be construed and implemented in accordance with the laws of the State of
Washington, USA. You are subject to the exclusive jurisdiction of the federal courts amended in King County,
Washington. If you are not subject to the federal jurisdiction, you shall be subject to the exclusive jurisdiction of the
High Court in King County, Washington. If this hardware device is purchased in Canada, Ontario law shall apply
unless otherwise expressly prohibited by the local laws. Each party hereby shall agree to the jurisdiction of the
courts of York, Ontario in the case of lawsuits. If this hardware device is purchased in another country not
mentioned above, local laws shall be applied.
F. Beneficiary
To the ext ent perm itte d by a ppli cable l aws, the Lim ited Warra nty shal l ap ply only to you , th e us er o f th e so ftwa re
or the buyer of the hardware device. The third party shall not be given the Limited Warranty. Unless otherwise
required by law this Limited Warranty shall not be applied to other parties, including any other person, including
grantees.
The following shall be applied to the remedies specified above. Software or hardware devices may be repaired or
exchanged, refurbished, or otherwise exchanged for used products, in principle, and may contain third party items
with the same function and performance as the original hardware device (or software). Any software or hardware
device repaired or exchanged pursuant to this Limited Warranty shall be warranted for either the remaining the
warranty period or 30 days from the date of shipment of the product. If software upgrades are shipped with a new
Limited Warranty, the new limited warranty terms shall apply only to the upgraded software and not to the original
hardware device. Unless otherwise required by laws in your jurisdiction, shipping costs (including packaging) for
the warranty service are your responsibility. INNOPRESSO shall disclaim warranty with respect to services provided
in accordance with the Limited Warranty.
C. Exclusion of other damages
To the max imum exte nt p ermitte d by a ppli cable l aws, INN OPRE SSO and its sup plie rs, affi liat es a nd agen ts s hall
not take responsibility for (i) any consequential or incidental damages, (ii) loss of profits, business interruption, loss
of data, privacy or secret, or any other kind of loss or damage, not being able to use the service, injury, or any
obligation (including, but not limited to, negligence, obligation of faith, duty of endeavor) (iii) indirect, special,
punitive damages arising out of or related the software or hardware devices. The above content shall apply to
INNOPRESSO, its suppliers, affiliates or agents who have been aware of the possibility of such loss, damage, or for
failure, illegal acts (including negligence), liability without fault, product responsibility, or false statement. Since
some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, the above
limitation or exclusion may not apply to you.
D. Exclusion of Warranty
This Limited Warranty shall not be applied if the software or hardware device is used for the commercial purpose
(including renting or leasing), used beyond the scope of the software license, modified or altered, or in the case of
force majeure, overvoltage, misuse, abuse, negligence, manipulation, or for any other reason not related to
defects of the hardware device or software, including damages caused by programs, data, viruses, files, shipment
or transmission, usage not in accordance with the enclosed documentation and instructions, being repaired,
modified or altered at any place other than INNOPRESSO authorized repair center and service center. This Limited
Warranty does not include warranties related to legal rights or abilities or express and implied warranties.
E. Registration
It is not necessary to register for the acquisition of software and hardware devices for the Limited Warranty to
take effect.
INNOPRESSO |
3-406, 20, Pangyo-ro 289beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, Republic of Korea, (13488)|070-4456-4451
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothe
followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and
(2)thisdevicemustacceptanyiterferencereceived,includinginterferencethatmay
causeundesiredoperations.
MadeinChina
FCCID: