User's Manual

ManualsBrandsInnomax Wireless ManualsElectronicsTransmitter TX2

B-Speech® Stereo Transmitter TX2

User guide

Introduction

The B-Speech® TX2 offers the latest in Bluetooth technology.

The B-Speech® TX2 transmits music data from players which are not Bluetooth capable (e.g.: MP3

and CD player, stereo and other players) to a Bluetooth receiver such as the stereo headset B-

Speech® Calypso or the speaker system B-Speech® Twiddle.

The B-Speech® TX2 can be used with any audio sources with a 3.5 mm audio output.

Normally the B-Speech® TX2 and a Bluetooth receiver establish a connection automatically, as if

using "Plug and Play".

After being turned on, the transmitter automatically scans, then pairs and connects to the receiver.

Note: Please read about pairing in the user guide of your Bluetooth receiver.

Technical data:

· Bluetooth V. 2.0, Class II, 10 meters

· Bluetooth stereo profile: A2DP

· Frequency: 2.4 GHz

· High Quality stereo IC

· Certified CE and FCC

· 3,5 mm stereo connector

· Sleep mode for energy saving

· Operation time: max. 5 hours

· Dimensions: L 48 x W 29,4 x H 12,5 mm

Start

The contents of the package consist of:

· B-Speech® stereo transmitter TX2

· Cable charger USB (portable charger optional)

· This user guide.

Please check that all the parts are present and intact. Contact your dealer as soon as possible if

anything is missing or damaged.

Get acquainted with the B-Speech® TX2

On / Off switch

LED indicator (under the cover)

Mini USB charger connection

90° swivel 3,5 mm connector

Charging

1. Connect the USB plug on the other end of the cable

charger to the USB input of your PC, laptop or optional

power supply.

2. Connect the cable charger mini USB plug to the mini

USB input of the B-Speech® TX2. The red LED lights up

during charging.

3. When charging is done, the red LED goes off.

4. Remove the cable charger.

Pairing the B-Speech® TX2 with the receiver

"Pairing" means making a wireless connection between the transmitter and the Bluetooth receiver.

Before being able to use B-Speech® TX2 with a receiver, you need to pair them.

After being turned on, the transmitter automatically scans, pairs and connects to the receiver.

Summary of content (3 pages)

PAGE 1
B-Speech® Stereo Transmitter TX2 User guide Introduction The B-Speech® TX2 offers the latest in Bluetooth technology. The B-Speech® TX2 transmits music data from players which are not Bluetooth capable (e.g.: MP3 and CD player, stereo and other players) to a Bluetooth receiver such as the stereo headset BSpeech® Calypso or the speaker system B-Speech® Twiddle. The B-Speech® TX2 can be used with any audio sources with a 3.5 mm audio output.
PAGE 2
Once pairing is established, both devices search for each other and connect automatically whenever they are switched on. Important note: B-Speech® TX2 pairs only with receivers which have a factory PIN-Code equal to '0000', '1234' or '8888'. After pairing, you can use B-Speech® TX2 with the Bluetooth receiver. If you wish to use B-Speech® TX2 with another receiver, you need to pair them also. In this case, B-Speech® TX2 will not re-connect with the previous device until you pair them again.
PAGE 3
FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.