Puzzle-B3 User's Manual Regulatory model: 2213 manual-en-250-0823-E-AN240-v100 Avision Inc.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.
1 Starting from Your Mobile Device Making Preparation To connect the Puzzle-B3 to a wireless LAN, prepare the followings: An environment in which a wireless LAN is available When connecting the Puzzle-B3 to a wireless LAN, you may need information for a wireless access point such as an SSID (network name) and a security key (password). For details, contact your Network Administrator or refer to the manual for the wireless access point. Attention! Do not place obstacles that block radio waves (e.g.
Connecting to A Wireless Network Connecting to a Wi-Fi network in an AP (Access Point) Mode In AP (Access Point) mode, your mobile devices and the Puzzle-B3 are connected wirelessly without an additional AP (Access Point) since the Puzzle-B3 itself works as an AP. AP (Access Point) On your mobile devices, make sure indicates the last six digits of the Mac Address) has been selected as your network name (SSID).
Important: Note the wired and wireless mode can not work at the same time. To connect the Puzzle-B3 in a wireless network, please first disconnect the Ethernet cable connecting to your scanner.
2 Technical Support If your problem still exists after trying the above solution, please contact our technical support. Headquarter Avision Inc. No. 20, Creation Road I, Science-Based Industrial Park, Hsinchu 300, Taiwan, ROC TEL: +886 (3) 578-2388 FAX: +886 (3) 577-7017 E-MAIL: service@avision.com.tw Web Site: http://www.avision.com.tw US and Canada Area Avision Labs, Inc. 6815 Mowry Ave., Newark CA 94560, USA TEL: +1 (510) 739-2369 FAX: +1 (510) 739-6060 E-MAIL: support@avision-labs.
South American Avision Brasil Ltda. Rua Bamboré 41, Vila Monumento, Ipiranga. CEP: 04278-060, São Paulo, Brasil TEL: +55-11-2737-2005 E-MAIL: suporte@avisionbrasil.com.br Web Site: http://www.avisionbrasil.com.
