User Manual

ManualsBrandsINNOCN ManualsElectronicsRF Wireless module

Table Of Contents

广州视源电子科技股份有限公司

Guangzhou Shiyuan Electronic Technology Company Limited

版权

CVTE

所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。

Manual

说明书

Model:AW.S905D3.03

Summary of content (17 pages)

PAGE 1
广州视源电子科技股份有限公司 Guangzhou Shiyuan Electronic Technology Company Limited Manual 说明书 Model:AW.S905D3.
PAGE 2
REVISION HISTORY VERSION DATE V0 2021.02.23 BOARD ID AW.S905D3.03（N） A21023 PAGE DESCRIPTION AUTHOR All First Issued. Yve Modified standard V1 2021.07.07 AW.S905D3.03（N） B21203 configuration,Board 1-4,9 Picture,Interface Yve Definition,Mechanical dimension.
PAGE 3
Content 1. STANDARD CONFIGURATION（标准配置）..................................................................1 2. BOARD PICTURE（板卡外观图）.......................................................................................2 3. FEATURES（特性说明）....................................................................................................... 3 3.1 CRITICAL MATERIALS of TV Part（TV 部分关键物料清单）............................ 3 4. INTERFACE DEFINITION（接口定义）.........................................................
PAGE 4
AW.S905D3.03（N） 1. STANDARD CONFIGURATION（标准配置）下表为我们主推的标准配置：标准配置无 HDMI OUT,Micro USB FUNCTIONS 【03_A2】无 HDMI OUT,Micro USB Notes -- SIDE VIEW CN3 外挂 HDMI OUT+USB3.0*1(FFC 41PIN)；内置 WIFI 模块（2.4G & 5G 双频双天线，SKI.WB668BS.3）& 蓝牙模块,内置 WIFI 模块（2.4G & 5G 双频单天线，SKI.WB8821CU.1）； OPTIONAL 内置 WIFI 模块（2.4G & 5G 双频双天线，SKI.WB668BS.3）& 蓝牙模块； FUNCTION 内置 WIFI 模块（2.4G & 5G 双频单天线，SKI.WB8821CU.1）内置 WIFI 模块（2.4G & 5G 双频双天线，SKI.WB668BS.3）& 蓝牙模块,内置 WIFI 模块（2.4G & 5G 双频单天线，SKI.WB800D.
PAGE 5
AW.S905D3.03（N） 2. BOARD PICTURE（板卡外观图） Pictures are for reference only, specific to prevail in kind. The optional connectors and functions are marked with “*”. 以下图片仅供参考，请以【结构图】或【实物】为准。可选的接口或者功能都以“*”标示。尺寸：98.5mm(L)*80mm(W)*1.6mm(H)（H 为 PCB 厚度） No.
PAGE 6
AW.S905D3.03（N） 3. FEATURES（特性说明） MAIN CHIPSET S905D3-N0N 主芯片 OSD LANGUAGE English,Chinese OSD 语言 USB FUNCTION software upgrade USB 功能软件升级 Note: Licenses involved in specifications above are supposed to be obtained by customers themselves. 注意：以上规格涉及 License 部分需要客户自己获取。 3.1 CRITICAL MATERIALS of TV Part（TV 部分关键物料清单） The table is for reference only, specific to prevail in kind.
PAGE 7
AW.S905D3.
PAGE 8
AW.S905D3.03（N）  CN1(6PIN/2.0): DC IN CONNECTOR (供电输入接口) 1 NO. SYMBOL 1 GND 2 GND 3 GND 4 POWER_IN 5 POWER_IN 6 POWER_IN 6 DESCRIPTION Ground Power in  *CN8(4PIN/2.0): DEBUG CONNECTOR (DEBUG 接口) 1 4 NO.
PAGE 9
AW.S905D3.03（N） 5. FUSE PROTECTION（保险丝保护） To protect the power module, the Fuse will be disconnected to cut off the power supply when the AC input current exceeds the rated current of fuse. 当输入交流电流超过保险丝的额定工作电流时，电源保险丝将断开，关闭电源供应以保护电源模块。 6. INTERNATIONAL STANDARDS（国际标准） 6.1 SAFETY（安规） Conforming： UL60950/UL60065; EN60950-1/EN60065; GB4943-2011/ GB8898-2011; IEC 60950/IEC 60065. 6.2 HI-POT AND INSULATION RESISTANCE（耐压性能和绝缘阻抗） HI-POT（耐压性能） Primary to secondary（一次侧对二次侧）：3000VAC, 10mA for 60s.
PAGE 10
AW.S905D3.03（N） 7. CONFIGURATION & GENERAL PRECAUTIONS（使用注意事项）  Relative humidity: ≤ 80%.  相对湿度： ≤ 80%。  Storage temperature: -10~60°C.  存储温度： -10~60°C。  System Operating: 0~40°C.  系统工作温度：0~40°C。  Protect the board from static electricity in case of damage to the IC.  请使板卡远离静电。  Keep the board away from conductor when it is working.  请确保板卡工作时远离导体。  Do not press the PCBA during transportation or placement.
PAGE 11
AW.S905D3.03（N） 8. MOUNT PRECAUTIONS（组装注意事项） Note1: If there is mylar under PCB bottom, H≥5 mm; If there is no mylar under PCB bottom, H≥9 mm. 如果板卡带麦拉片，则 H≥5mm；如果板卡不带麦拉片，则 H≥9mm. Note2: The diameter of D should be less than8mm. Use M3 screw to mount the power supply unit on the screw fixing column. The maximum torque force is 0.4N-M. D 的直径须小于 8mm，将电源锁在螺丝柱上需使用 M3 的螺丝。最大扭力为 0.4N-M。 Note3: The Power supply unit is designed without the case. Pay attention to ESD protection at any time.
PAGE 12
AW.S905D3.03（N） 9. MECHANICAL DIMENSION（结构尺寸图） 90 1.6 R2 ∅8 4- ∅ 4. 5 5.5 H=3 4 17.7 29.5 6.5 4.5 10.6 15.5 35.5 19.6 80 72 H=10 62.4 98.
PAGE 13
AW.S905D3.03（N） 10. NOTICE REGARDING TV MEDIA FORMAT AND INTERFACE TECHNOLOGY（TV 媒体格式与接口技术说明）概述本文档用于描述 TV 产品可能涉及的媒体格式和接口技术。媒体格式接口技术及其他 Dolby Digital Decoder MPEG2/MPEG4 HDMI Hbbtv2.0 Dolby Digital Plus Decoder AMR-NB HDCP Netflix Dolby MS11 AMR-WB Wi-Fi Freeview Play Dolby MS12 DRA USB NTFS Dolby Atmos AAC/HEAAC MHL Seraphic Open Browser Dolby Vision H.264 Bluetooth Seraphic TV Portal DTS Sound H.
PAGE 14
AW.S905D3.03（N） Dolby Atmos AAC/HEAAC MHL Seraphic Open Browser Dolby Vision H.264 Bluetooth Seraphic TV Portal DTS Sound H.265 NFC － DTS TruSurround DivX DVB-T2 － DTS HD RMVB DVB-S2x － DTS 2.0+Digital Out WMA ATSC － DTS Express 5.1 WMA Pro PlayReady － DTS Studio Sound dbx-tv MSS － DTS Studio Sound II － Widevine － Notice In the event the LCD TV Driver Boards (“Boards”) purchased or customized by your good company include any hardware(e.g.
PAGE 15
AW.S905D3.
PAGE 16
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.
PAGE 17
Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules CFR 47 FCC PART 15 SUBPART C has been investigated. It is applicable to the modular transmitter 2.3 Specific operational use conditions This module is stand-alone modular.