Remote Control Outlets [Instruction Manual] Thank you for your purchase. Please contact us if you have any questions. We will get back to you within 24 hours. Please attach your Order ID so that we can serve you better.
Warning: To reduce the risk of fire, electric shock or personal injury, please strictly follow the instructions. 1. Do not immerse in water. 2. Do not connect any devices which may exceed the maximum ratings of this remote outlet. 3. Do not disassemble or repair the product, but only by authorized service personnel. 4. Children are not allowed to use the remote outlets without supervision. 5. To prevent children suffocation and chocking, keep them away from packaging materials. 6.
1. Remove the isolation tap in the battery compartment on the transmitter. 2. Plug the receiver into a powered outlet. 3. Plug your device into the socket of the receiver. 4. To control your matching devices: 1) Press the ON/OFF button on the transmitter. 2) Or press the programming button on the receiver. 3) The indicator light of the receiver turns on when the unit is activated.
Mounting the Wall Switch 1.Separate the upper and lower shells of the Wall Switch. Way1 Way2 2.Install Wall Plate Way1: Secure the lower housing of the wall switch to the wall using the provided mounting screws. Way2: Secure the lower housing of the wall switch inside the wall box using the provided mounting screws.
3.Attach the upper shell to the lower shell. 4.Attach the transmitter to the base. 5.Press the ON/OFF button on the wall switch remote control to turn the receiver on and off.
Battery Replacement If you find the receivers works abnormally or the indicator on the remote control becomes dim, please replace the battery. - Open the battery compartment and remove the old battery. - Install a new CR2032 battery, making sure the polarity + / - of the battery is correct.Install a new CR2032 battery, making sure the polarity + / - of the battery is correct. - Close the battery compartment. Specifications - Input Voltage: 125VAC 60Hz - Max.
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help.
