User's Manual

INNCOM PC-502.2 Datasheet
Overview
The INNCOM PC-502 wall mounted module can be used to expand the range of a
network (IR or Layer-1 or Layer-2 RF) or to provide the protocol gateway from
INNCOM S5-bus to Layer-1 or Layer-2 RF protocol.
In an IR network, the PC-502 module can be used to provide remote eye functionality
or protocol gateway from INNCOM S5-bus to IR wireless protocols. The PC-502 adds
functionality beyond the traditional remote eye because, as a smart 5-bus device, it can
be powered from a standard 3-pin 5-bus connection.
In a Layer-1 RF network, the PC-502 provides S5-bus to RF protocol conversion, giving any
INNCOM product participating in the INNCOM Integrated Room Automation System
(IRAS) an RF transceiver for control of wireless products in the guestroom.
In the Deep Mesh 802.15.4 network, the PC-502 is designed to patch areas within the
network where signal strength is lost due to distance limitations or interference. It
also serves to create multiple pathways, increasing the redundancy of the mesh communications to ensure
maximum network reliability.
Features
 Small wall mountable form factor
 2.4Ghz IEEE 802.15.4 compliant RF transceiver (CC2430 radio core)
 Medium and long range variants available
 Industrial temperature ratings 0–65 degrees C
 FCC Part 15b listed
Specification
Parameter
PC-502.2
RF Data Rate
250kbps
Antenna Type
SMT
Indoor Range
100ft
Outdoor/ RF line-of-sight range
1000ft+
Transmit Power
10mW (+18dBm)
Receive Sensitivity
-94.6dBm
Frequency Band
2.4Ghz
Encryption
AES-128
Protocol
802.15.4
Frequency Channels
11-26
Input Voltage
12VDC
Current Consumption
100mA (Peak)
Operating Ambient Temperature
40°C
Figure 1 PC-502