DN-200BR User Guide English ( 3 – 12 ) Guía del usuario Español ( 13 – 22 ) Guide d’utilisation Français ( 23 – 32 ) Guida per l’uso Benutzerhandbuch Appendix Italiano ( 33 – 42 ) Deutsch ( 43 – 52 ) English ( 53 – 58 )
User Guide (English) Introduction ® DN-200BR is a Bluetooth audio receiver with professional-grade audio outputs. It lets you add wireless stereo Bluetooth audio reception to any professional audio system. Once you pair your Bluetooth device to DN-200BR, you can send your device’s audio signal out DN-200BR’s balanced XLR or unbalanced 1/4” (6.35 mm) outputs to your mixer, loudspeakers, or amplification system.
Features 5.8” (149mm) OUTPUT 6 2 5 4 3 BAL. UNBAL. 1 8 UNBAL. 7 7 1.8” (45mm) 8 1. Power Input: Use the included power adapter to connect this input to a power outlet. See Setup for more information. 2. BNC Antenna Terminal: Connect the included removable Bluetooth antenna to this BNC connector. The antenna receives and transmits the Bluetooth signal from a paired Bluetooth device. DN-200BR has a range of up to 82 feet (25 meters). 3.
. Status Light: This LED indicates the DN-200BR’s Bluetooth pairing status: • Flashing slowly (approximately twice every 2 seconds): DN200BR is not paired to a Bluetooth device. • Flashing quickly (approximately twice per second): DN-200BR can be paired to a Bluetooth device. • Solidly lit: DN-200BR is paired to a Bluetooth device. See Operation to learn how to pair/unpair a Bluetooth device to/from DN-200BR. 6.
Setup Items not listed under Introduction > Box Contents are sold separately. 1. Use either XLR cables or 1/4” (6.35mm) cables to connect the DN200BR’s outputs (balanced or unbalanced) to your loudspeakers, mixer, amplifier, or other device that accepts line-level inputs (this device must be powered off). Important: For stereo operation, make sure all left (L) and right (R) outputs are connected to left and right inputs, respectively. 2.
Example PA loudspeakers Loudspeakers Mixer OUTPUT BAL. UNBAL. UNBAL. Power Smartphone, tablet, etc.
Operation You can play audio from an audio device that sends its signal over a Bluetooth connection (e.g., smartphones, tablet computers, etc.). DN200BR uses Bluetooth CSR 4.0 and has a range of up to 82 feet (25 meters). Once you “pair” your Bluetooth device with DN-200BR, they are “connected” wirelessly. You can play audio on your Bluetooth device, and it will be sent out of DN-200BR’s outputs (balanced and unbalanced). Important: • DN-200BR will not receive audio from a phone call.
To pair your Bluetooth device to DN-200BR: 1. If DN-200BR is off, use the included power adapter to connect its power input to your power source. The Status Light will flash slowly. 2. Make sure your desired Bluetooth device has its Bluetooth connectivity on and is within range. DN-200BR will automatically try to pair with the last-paired Bluetooth device, if any. If you are using that Bluetooth device again, you can start playing audio immediately.
5. On your Bluetooth device, start playing audio. To adjust your volume level, we recommend setting the volume control of each of your devices in the following order: i. your Bluetooth device ii. DN-200BR, using its Level Knob iii. your mixer, if any (its input channel level[s], then its main output level) iv. your loudspeakers Set each volume level as high as possible without creating distortion or any “clipping” of the sound. Important: DN-200BR will not receive audio from a phone call.
Troubleshooting If you encounter a problem, try doing these things first: • Make sure all cables and other connected devices are properly and securely connected. • Make sure you are using DN-200BR as described in this User Guide. • Make sure your other devices or media are working properly. • If you believe DN-200BR is not working properly, check the following table for your problem and solution. Problem: Solution: Please see: Power does not turn on.
Problem: Solution: Please see: Audio from my Bluetooth device does not play through DN-200BR. Make sure you have properly paired your Bluetooth device. Setup and Operation Pairing my Bluetooth device to DN-200BR requires a PIN. Enter 0000 as the PIN. (Some older Bluetooth devices may require you to enter a PIN.) 12 Improve the Bluetooth signal reception by moving your Bluetooth device closer to DN-200BR. Also, remove obstacles (walls, furniture, etc.
Guía del usuario (Español) Introducción El DN-200BR es un receptor de audio Bluetooth® con salidas de audio de grado profesional. Le permite agregar recepción inalámbrica de audio Bluetooth estéreo a cualquier sistema de audio profesional. Una vez apareado su dispositivo Bluetooth con el DN-200BR, podrá enviar la señal de audio de su dispositivo por las salidas XLR balanceadas no balanceadas de 6,35 mm (1/4 pulg.) de su DN-200BR hacia su mezclador, altavoces o sistema de amplificación.
Características 149 mm (5,8 pulg.) OUTPUT 6 2 5 4 3 BAL. UNBAL. UNBAL. 45 mm (1,8 pulg.) 1 8 7 7 8 1. Entrada de corriente: Utilice el adaptador de corriente incluido para conectar esta entrada a una toma de corriente. Consulte Ajustes para más información. 2. Terminal de la antena BNC: Conecte a este conector BNC la antena Bluetooth removible. La antena recibe y transmite la señal Bluetooth desde un dispositivo Bluetooth apareado. El DN-200BR tiene un alcance hasta 25 metros (82 pies). 3.
5. Luz Status (De estado): Este LED indica el estado de apareamiento Bluetooth del DN-200BR: • Parpadeo lento (aproximadamente dos veces cada 2 segundos): El DN-200BR no se encuentra apareado con un dispositivo Bluetooth. • Parpadeo rápido (aproximadamente dos veces por segundo): El DN-200BR puede aparearse con un dispositivo Bluetooth. • Encendido permanentemente: El DN-200BR se encuentra apareado con un dispositivo Bluetooth.
Ajustes Los elementos que no se enumeran en Introducción > Contenido de la caja se venden por separado. 1. Utilice cables tanto XLR como de 6,35 mm (1/4 pulg.) para conectar las salidas (balanceadas o no balanceadas) del DN-200BR a sus altavoces, mezclador, amplificador u otro dispositivo que acepte entradas de nivel de línea (este dispositivo debe estar apagado).
Ejemplo Altavoces de potencia Altavoces Mezclador OUTPUT BAL. UNBAL. UNBAL. Suministro eléctrico Teléfono inteligente (smartphone), tableta, etc.
Operación Puede reproducir audio desde un dispositivo que transmita su señal a través de una conexión Bluetooth (por ej., teléfonos inteligentes [smartphones], tabletas, etc.). El DN-200BR utiliza Bluetooth CSR 4.0 y tiene un alcance hasta 25 metros (82 pies). Una vez “apareado” su dispositivo Bluetooth con el DN-200BR, quedan “conectados” inalámbricamente. Puede reproducir audio en su dispositivo Bluetooth y será enviado por las salidas del DN-200BR (balanceadas y no balanceadas).
Cómo aparear su dispositivo Bluetooth con el DN-200BR: 1. Si el DN-200BR está apagado, utilice el adaptador de corriente para conectar su entrada de corriente a una fuente de corriente. La luz de estado parpadeará lentamente. 2. Asegúrese de que su dispositivo Bluetooth deseado tenga su conectividad Bluetooth activada y se encuentre dentro del alcance. El DN-200BR intentará aparearse automáticamente con el último dispositivo Bluetooth apareado, si existe.
5. Reproduzca audio en su dispositivo Bluetooth. Para ajustar el nivel de volumen, recomendamos ajustar el control de volumen de cada uno de sus dispositivos en el siguiente orden. i. su dispositivo Bluetooth ii. el DN-200BR, utilizando su perilla Level iii. su mezclador, si existe (el/los nivel[es] de su canal de entrada, luego su nivel de salida principal) iv. sus altavoces Ajuste cada nivel de volumen tan alto como sea posible sin distorsionar ni “recortar” el sonido.
Solución de problemas Si experimenta problemas, intente estas soluciones primero: • Asegúrese de que todos los cables y demás dispositivos conectados estén conectados firme y correctamente. • Asegúrese de estar utilizando el DN-200BR como describe esta Guía del usuario. • Asegúrese de que todos sus otros dispositivos o medios funcionen correctamente. • Si cree que el DN-200BR no está funcionando correctamente, busque su problema y solución en la siguiente tabla.
Problema: Solución: Consulte: El DN-200BR no emite ningún sonido o el sonido está distorsionado. Asegúrese de que todas las conexiones de cables y dispositivos estén firmes y correctas. Asegúrese de que ninguno de los cables esté dañado. Asegúrese de que los ajustes en su dispositivo Bluetooth, altavoz, mezclador, etc. sean correctos. Ajustes El DN-200BR no reproduce el audio proveniente de mi dispositivo Bluetooth. Asegúrese de haber apareado correctamente su dispositivo Bluetooth.
Guide d’utilisation (Français) Présentation DN-200BR est un récepteur audio Bluetooth® avec sorties audio de qualité professionnelle. Il vous permet d’ajouter une réception stéréo sans fil Bluetooth à n’importe quel système audio professionnel.
Caractéristiques 149 mm (5,8 po) OUTPUT 6 2 5 4 3 BAL. UNBAL. 1 8 UNBAL. 7 7 45 mm (1,8 po) 8 1. Entrée d’alimentation : Utilisez le câble d’alimentation secteur inclus pour brancher cette entrée à une prise secteur. Pour de plus amples informations, veuillez consulter la section Installation. 2. Borne d'antenne BNC : Cette borne BNC permet de brancher l’antenne Bluetooth amovible incluse. L’antenne reçoit et transmet le signal Bluetooth depuis et vers un appareil Bluetooth jumelé.
5. DEL d’état : Cette DEL indique l’état du jumelage Bluetooth du DN200BR : • Clignote lentement (environ deux fois toutes les 2 secondes) : le DN-200BR n’est pas jumelé à un appareil Bluetooth. • Clignote rapidement (environ deux fois toutes les 2 secondes) : le DN-200BR peut être jumelé à un appareil Bluetooth. • Allumée : le DN-200BR est jumelé à un appareil Bluetooth. Veuillez consulter la section Fonctionnement afin d’apprendre à jumeler/déjumeler un appareil Bluetooth au DN-200BR. 6.
Installation Les articles qui ne figurent pas dans la section Présentation > Contenu de la boîte sont vendus séparément. 1. Utilisez des câbles XLR ou 6,35 mm (1/4 po) pour connecter les sorties du DN-200BR (symétriques ou asymétriques) à vos enceintes, console de mixage, amplificateur, ou un autre appareil qui accepte les entrées de niveau ligne (cet appareil doit être mis hors tension).
Exemple Enceintes de sonorisation Enceintes Console de mixage OUTPUT BAL. UNBAL. UNBAL. Alimentation Smartphone, tablette, etc.
Fonctionnement Vous pouvez lire des fichiers audio à partir d’un appareil audio qui transmet son signal via une connexion Bluetooth (p. ex., les smartphones, les tablettes, etc.). Le DN-200BR utilise Bluetooth CSR 4.0 et a une portée allant jusqu’à 25 mètres (82 pieds). Une fois que vous « jumelez » de votre appareil Bluetooth avec le DN200BR, ils sont « connectés » sans fil.
Pour jumeler un appareil Bluetooth au DN-200BR : 1. Alors que le DN-200BR est hors tension, utilisez le câble d’alimentation secteur inclus pour brancher l’entrée d’alimentation à une prise secteur. La DEL d’état devrait clignoter lentement. 2. Assurez-vous que la fonction Bluetooth de l’appareil Bluetooth que vous souhaitez jumeler est activée et qu’il se trouve dans les limites de portée du DN-200BR.
5. Lancer la lecture de fichier audio sur votre appareil Bluetooth. Pour ajuster le volume, nous vous recommandons de régler le volume de chacun de vos appareils dans l’ordre suivant : i. appareil Bluetooth ii. DN-200BR, en utilisant le bouton des niveaux iii. console de mixage, le cas échéant (le niveau des canaux d’entrées, puis le niveau de sortie général) iv. enceintes Réglez tous les niveaux aussi hauts que possible sans créer de distorsion ou d’écrêtage.
Dépannage En cas de problème, procédez comme suit : • Vérifiez que tous les câbles et autres appareils sont correctement branchés. • Vérifiez que vous utilisez le DN-200BR comme indiqué dans ce guide d’utilisation. • Vérifiez que vos autres appareils et médias fonctionnent correctement. • Si vous croyez que le DN-200BR ne fonctionne pas correctement, vérifiez le tableau suivant afin de trouver le problème et la solution. Problème : Solution : Veuillez consulter : L’appareil ne s’allume pas.
Problème : Solution : Le DN-200BR ne produit aucun son, ou le son est déformé. Assurez-vous que tous les câbles la section et appareils soient correctement Installation raccordés. Assurez-vous que les câbles ne soient pas endommagés. Assurez-vous que les paramètres de votre appareil Bluetooth, enceinte, console de mixage, etc. soient correctement réglés. Le DN-200BR ne transmet pas le signal audio de l’appareil Bluetooth.
Guida per l’uso (Italiano) Introduzione ® Il DN-200BR è un ricevitore audio Bluetooth dotato di uscite audio di livello professionale. Consente di aggiungere la ricezione wireless di audio Bluetooth stereo a qualsiasi impianto audio professionale.
Caratteristiche 149 mm (5,8”) OUTPUT 6 2 5 4 3 BAL. UNBAL. 1 8 UNBAL. 7 7 45 mm (1,8”) 8 1. Ingresso di alimentazione: servirsi dell’adattatore di alimentazione in dotazione per collegare questo ingresso ad una presa di alimentazione. Per maggiori informazioni, si veda Setup. 2. Terminale Antenna BNC: collegare l'antenna Bluetooth removibile in dotazione a questo connettore BNC. l’antenna riceve e trasmette il segnale Bluetooth di un dispositivo Bluetooth collegato.
5. Spia di stato: questo LED indica lo stato di collegamento Bluetooth del DN-200BR: • Se lampeggia lentamente (circa due volte ogni 2 secondi): il DN-200BR non è collegato a un dispositivo Bluetooth. • Se lampeggia rapidamente (circa due volte al secondo): il DN200BR può essere collegato a un dispositivo Bluetooth. • Se è fissa: il DN-200BR è collegato a un dispositivo Bluetooth. Si veda Uso per maggiori informazioni su come collegare/scollegare un dispositivo Bluetooth al/dal DN-200BR. 6.
Setup Elementi non elencati sotto Introduzione > Contenuti della confezione sono venduti separatamente. 1. Servirsi di cavi XLR o da 1/4” (6,35 mm) per collegare le uscite del DN-200BR (bilanciate o non bilanciate), agli altoparlanti, al mixer, all’amplificatore o ad altri dispositivi che accettano ingressi a livello di linea (questi devono essere spenti).
Esempio Altoparlanti PA Altoparlanti Mixer OUTPUT BAL. UNBAL. UNBAL. Alimentazione Smartphone, tablet, ecc.
Uso Si può riprodurre audio da un dispositivo audio che invia i segnali tramite un collegamento Bluetooth (ad es. smartphone, tablet, ecc.). Il DN-200BR impiega Bluetooth CSR 4.0 ed ha una portata fino a 25 metri. Una volta “collegato” il dispositivo Bluetooth con il DN-200BR, questi sono “collegati” senza fili. È possibile riprodurre audio sul dispositivo Bluetooth che verrà inviato tramite le uscite del DN-200BR (bilanciate e non bilanciate). Importante: • Il DN-200BR non riceve audio da una telefonata.
Per collegare il dispositivo Bluetooth al DN-200BR: 1. Se il DN-200BR è spento, servirsi dell’adattatore di alimentazione in dotazione per collegare l’ingresso di alimentazione alla fonte di alimentazione. La spia di stato lampeggia lentamente. 2. Assicurarsi che la connettività Bluetooth del dispositivo Bluetooth desiderato sia accesa e che questo si trovi entro la portata. Il DN200BR tenterà automaticamente di collegarsi all’ultimo dispositivo Bluetooth collegato.
5. Sul dispositivo Bluetooth, iniziare a riprodurre l’audio. Per regolare il livello del volume, si raccomanda di configurare il comando di regolazione del volume di ciascun dispositivo nel seguente ordine: i. il dispositivo Bluetooth ii. il DN-200BR, tramite la manopola Level iii. il mixer (prima il livello dei canali di ingresso, poi il livello dell’uscita main) iv. gli altoparlanti Impostare il volume a un livello tale per cui non si creino distorsioni o “tagli” del suono.
Risoluzione di problemi In caso di problemi, innanzitutto verificare quanto segue: • Assicurarsi che tutti i cavi e tutti i dispositivi collegati siano bel collegati. • Assicurarsi di utilizzare il DN-200BR come descritto in questa Guida per l’uso. • Assicurarsi che gli altri dispositivi o media funzionino correttamente. • Se si ritiene che il DN-200BR non funzioni correttamente, verificare se nella seguente tabella sono presenti il problema specifico e la relativa soluzione.
Problema: Soluzione: Si veda: L’audio proveniente dal mio dispositivo Bluetooth non viene riprodotto tramite il DN-200BR. Assicurarsi di aver collegato adeguatamente il dispositivo Bluetooth. Setup e Uso Il collegamento del mio dispositivo Bluetooth al DN-200BR richiede un PIN. Inserire 0000 come PIN. (Alcuni dispositivi Bluetooth più vecchi possono richiedere l’inserimento di un PIN). 42 Migliorare la ricezione del segnale Bluetooth avvicinando il dispositivo Bluetooth al DN-200BR.
Benutzerhandbuch (Deutsch) Einführung ® Das DN-200BR ist ein Bluetooth Audio-Empfänger mit professionellen AudioAusgängen. Es ermöglicht Ihnen, jedem professionellen Audio-System einen kabellosen Stereo-Bluetooth-Audioempfang hinzuzufügen. Sobald Sie Ihr Bluetooth-Gerät mit dem DN-200BR koppeln, können Sie das Audiosignal Ihres Geräts aus dem symmetrischen XLR des DN-200BR oder aus den unsymmetrischen 6,35mm-Ausgängen an Mixer, Lautsprecher oder Verstärkersystem senden.
Funktionen 149 mm (5,8”) OUTPUT 6 2 5 4 3 BAL. UNBAL. UNBAL. 45 mm (1,8”) 1 8 7 7 8 1. Stromversorgung: Verwenden Sie das mitgelieferte Netzteil, um diesen Eingang mit einer Steckdose zu verbinden. Siehe Setup für weitere Informationen. 2. BNC-Antennenanschluss: Schließen Sie die mitgelieferte, abnehmbare Bluetooth-Antenne an diesen BNC-Anschluss an. Die Antenne empfängt und sendet das Bluetooth-Signal von einem gekoppelten Bluetooth-Gerät.
5. Statusanzeige: Diese LED zeigt den Bluetooth-Verbindungsstatus des DN-200BR an: • Blinkt langsam (ungefähr zweimal alle 2 Sekunden): Das DN200BR ist nicht mit einem Bluetooth-Gerät gekoppelt. • Blinkt schnell (ca. zweimal pro Sekunde): Das DN-200BR kann mit einem Bluetooth-Gerät gekoppelt werden. • Leuchtet durchgehend: Das DN-200BR ist mit einem BluetoothGerät gekoppelt.
Setup Teile, die nicht unter Einführung > Lieferumfang angegeben sind, sind separat erhältlich. 1. Verwenden Sie XLR-Kabel oder 6,35 mm (1/4”) Kabel, um die Ausgänge (symmetrisch oder unsymmetrisch) des DN-200BR mit Lautsprechern, einem Mixer, Verstärker oder anderen Gerät zu verbinden, das Line-Eingänge verwendet (das Gerät muss ausgeschaltet sein). Wichtig: Im Stereo-Betrieb müssen Sie sicherstellen, dass alle linken (L) und rechten (R) Ausgänge jeweils mit den linken und rechten Eingängen verbunden sind.
Beispieldiagramm PA-Lautsprecher Lautsprecher Mixer OUTPUT BAL. UNBAL. UNBAL. Stromversorgung Smartphone, Tablet usw.
Betrieb Sie können Audio von einem Audiogerät abspielen, das sein Signal über eine Bluetooth-Verbindung (z.B. Smartphones, Tablets usw.) sendet. Das DN200BR nutzt Bluetooth CSR 4.0 und hat eine Reichweite bis zu 25 Meter (82 Fuß). Sobald Sie Ihr Bluetooth-Gerät mit dem DN-200BR „koppeln“, sind sie drahtlos „verbunden“. Wenn Sie Audio auf Ihrem Bluetooth-Gerät abspielen, wird es aus den (symmetrischen und unsymmetrischen) Ausgängen des DN-200BR gesendet.
So koppeln Sie Ihr Bluetooth-Gerät mit dem DN-200BR: 1. Falls das DN-200BR ausgeschaltet ist, verwenden Sie das mitgelieferte Netzteil, um den Netzeingang des DN-200BR an Ihre Stromquelle anzuschließen. Die Statusanzeige blinkt langsam. 2. Achten Sie darauf, dass die Bluetooth-Konnektivität am gewünschten Bluetooth-Gerät aktiviert ist und dass sich das Gerät in Reichweite befindet. DN-200BR versucht gegebenenfalls automatisch, eine Verbindung mit dem zuletzt gekoppelten Bluetooth-Gerät herzustellen.
5. Beginnen Sie mit der Audio-Wiedergabe auf Ihrem Bluetooth-Gerät. Um die Lautstärke einzustellen, empfehlen wir die Pegel jedes einzelnen Geräts in dieser Reihenfolge anzupassen: i. Ihr Bluetooth-Gerät ii. DN-200BR mithilfe des Pegelreglers iii. Ihr Mixer, falls vorhanden (zuerst seinen Eingangskanalpegel und dann seinen Hauptausgangspegel) iv. Ihre Lautsprecher Stellen Sie die einzelnen Lautstärkepegel so hoch wie möglich ein, ohne dass es zu Verzerrungen oder „Clipping“ kommt.
Fehlerbehebung Wenn ein Problem auftritt, versuchen Sie zuerst folgende Lösungen: • Achten Sie darauf, dass alle Kabel und andere angeschlossene Geräte korrekt und sicher verbunden sind. • Achten Sie darauf, dass Sie das DN-200BR laut vorliegendem Benutzerhandbuch verwenden. • Achten Sie darauf, dass Ihre anderen Geräte oder Medien ordnungsgemäß funktionieren. • Wenn Sie glauben, dass das DN-200BR nicht ordnungsgemäß funktioniert, überprüfen Sie die folgende Tabelle auf Lösungen für das Problem.
Problem: Lösung: Siehe: Das DN-200BR gibt keinen Ton aus bzw. der Ton klingt verzerrt. Stellen Sie sicher, dass alle Kabel- und Geräteanschlüsse sicher und korrekt sind. Setup Achten Sie darauf, dass keine Kabel beschädigt sind. Vergewissern Sie sich, dass die Einstellungen auf Ihrem Bluetooth-Gerät, Lautsprecher, Mixer usw. korrekt sind. Die Audiosignale von meinem Bluetooth-Gerät werden nicht über das DN-200BR abgespielt.
Appendix (English) Technical Specifications All values are measured with a 1 KHz audio signal with Level knob at “unity” position. Specifications are subject to change without notice. Bluetooth range is affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc. Frequency Response 20 Hz – 20 KHz (+1 dBu) Signal-to-Noise Ratio > 75 dB THD < 0.
Bluetooth Version Specifications Maximum Receiver Power 54 CSR 4.0 Class 2, 4 dBm Receiver Frequency 2.4 GHz – 2.480 GHz Receiver Range Up to 82 ft. / 25 m Receiver Sensitivity -80 dBm @ 0.1% BER Supported Profiles AVCTP 1.0 AVRCP 1.0 GAVDP 1.2 AVDTP 1.0 A2DP 1.2 Hands-Free Profile (HFP) 1.5 Headset Profile (HSP) 1.
Operation Temperature 41–95°F / 5–35°C Power Power Adapter: US: 5 V DC, 2 A, center-positive EU: 5 V DC, 3 A, center-positive Input Voltage: 100–240 V AC, 50/60 Hz Dimensions 5.8” x 4.6” x 1.8” 149 x 117 x 45 mm (width x depth x height) Weight 1.3 lbs. 0.6 kg Trademarks and Licenses Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Warnings This device complies with Industry Canada’s licence-exempt RSSs Operation is subject to the following two conditions: (1) This device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
denonpro.com Manual Version 1.
English FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Maintain a distance of at least 8 inches / 20 centimeters of separation between the transmitter’s radiating structure(s) and your body or other people nearby. Español Declaración sobre exposición a las radiaciones según normas de la FCC: Este equipo cumple los límites de exposición a la radiación establecidos por la FCC para un ambiente no controlado.