User Guide English (2–9) Guía del usuario Español (10–17) Guide d’utilisation Français (18–25) Guida per l’uso Benutzerhandbuch Appendix Italiano (26–33) Deutsch (34–41) English (42–43)
User Guide (English) Introduction Thank you for purchasing the Convoy. At Denon Professional, performance and reliability mean as much to us as they do to you. That’s why we design our equipment with only one thing in mind—to make your performance the best it can be. Box Contents Convoy Power Cable (2) UHF Antennas (2) Wireless Handheld Microphones User Guide Safety & Warranty Manual Support For the latest information about this product (system requirements, compatibility information, etc.
Important Safety Precautions Please note: Denon Professional and inMusic are not responsible for the use of its products or the misuse of this information for any purpose. Denon Professional and inMusic are not responsible for the misuse of its products caused by avoiding compliance with inspection and maintenance procedures. Please also refer to the included safety and warranty manual for more information.
Setup 1. Make sure all items listed in the Box Contents are included in the box. 2. Read the Safety & Warranty Manual before using the product. 3. Make sure that you have completely charged the battery prior to first use for maximum battery life. 4. Turn down the Master Volume on Convoy. 5. Power on Convoy. 6. Connect your devices. 7. Switch everything on in the following order: • audio input sources (i.e. microphones, instruments, CD/MP3 Players) • Convoy 8. Raise the volume to a comfortable level. 9.
Features Front Panel 13 1 1 1 4 WIRELESS MIC LINE MIC 2 3 TREBLE VOLUME 9 5 10 CHARGE 5V 1A BT/AUX 2 WIRELESS MIC LINE BASS 4 MIC BASS 2 MASTER TREBLE AUX IN VOLUME CONVOY PROFESSIONAL MOBILE PA/DIVERSITY RF SYSTEM/BLUETOOTH OFF CHARGE 6 VOLUME POWER ON VOLUME 7 11 BATTERY LEVEL 100% 75% 50% 25% 0% 8 12 FOR MAXIMUM BATTERY LIFE: -CHARGE FULLY BEFORE STORAGE -AVOID STORAGE IN FREEZING CONDITIONS -CHARGE BI-MONTHLY LINE OUT 1.
9. USB Charging Port: Connect your device’s charge cable here to charge it. USB charging only functions when the unit’s power is turned on. Note: To charge smartphones and tablets faster, put the device’s screen to sleep. 10. Power Switch: Use this switch to power the loudspeaker on or off. Make sure all Volume knobs are set to "zero" before powering it on. When the loudspeaker is powered on, the Power LED above it will be lit. 11.
Operation Wireless Microphone Setup To use a wireless mic, follow these setup steps: IR LED 1. Connect the UHF antennas to Convoy. 2. Install 2 new AA alkaline batteries in the wireless microphone. IR sensor 3. Adjust the Line/Mic/Wireless Mic switch to the Wireless Mic position for the channel that you want to use with the wireless mic. RF LED 4. Pair the wireless mic to Convoy. a. Turn on Convoy and the wireless mic. b. Select a group and channel with the best reception.
Pairing a Bluetooth Device 1. Turn on your Bluetooth device. 2. Turn on Convoy using the power switch. 3. Press the Bluetooth button on the Convoy to pair it with a Bluetooth device. 4. Navigate to your Bluetooth device’s setup screen, find Convoy and connect. The Bluetooth LED will light up solid when it is "paired”. Note: If your device requires a passcode or PIN, enter 0000. 5.
Troubleshooting If the sound is distorted: Try lowering the volume control of your sound source, musical instrument, or microphone. Also, try to reduce the overall volume of Convoy using the Master Volume knob. If there is too much bass: Try adjusting the Bass control on Convoy and on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs. If there is a high-pitched whistling noise when using microphones: This is probably feedback.
Guía del usuario (Español) Introducción Gracias por comprar el Convoy. En Denon Professional, el rendimiento y la confiabilidad significan tanto para nosotros como para usted. Por eso es que diseñamos nuestros equipos con una sola cosa en mente—hacer que pueda tocar su mejor interpretación.
Precauciones importantes para la seguridad Para tener en cuenta: Denon Professional e inMusic no son responsables del uso de sus productos o el mal uso de esta información para cualquier propósito. Denon Professional e inMusic no son responsables del mal uso de sus productos causados por la omisión del cumplimiento de los procedimientos de inspección y mantenimiento. Para más información, consulte también el manual de seguridad y garantía incluido.
Instalación 1. Asegúrese de que todos los artículos indicados en Contenido de la caja estén incluidos en ella. 2. Lea el manual sobre la seguridad y la garantía antes de utilizar el producto. 3. Para asegurar una máxima vida útil de la batería, asegúrese de que esté completamente cargada antes de utilizarla por primera vez. 4. Asegúrese de que el volumen maestro del Convoy esté en cero. 5. Encienda el Convoy. 6. Conecte sus dispositivos. 7.
Características Panel frontal 13 1 1 1 4 WIRELESS MIC LINE MIC 2 3 TREBLE VOLUME 9 5 10 CHARGE 5V 1A BT/AUX 2 WIRELESS MIC LINE BASS 4 MIC BASS 2 MASTER TREBLE VOLUME AUX IN VOLUME CONVOY PROFESSIONAL MOBILE PA/DIVERSITY RF SYSTEM/BLUETOOTH POWER ON OFF CHARGE 6 VOLUME 7 100% 75% 50% 25% 0% 8 11 BATTERY LEVEL 12 FOR MAXIMUM BATTERY LIFE: -CHARGE FULLY BEFORE STORAGE -AVOID STORAGE IN FREEZING CONDITIONS -CHARGE BI-MONTHLY LINE OUT 1.
8. Salida de línea: Esta salida TRS de 6,35 mm (1/4 pulg.) puede conectar a una salida auxiliar o a un mezclador. La salida de línea es post control de volumen maestro. 9. USB estación: Conecte aquí el cable de carga de su dispositivo para cargarlo. La carga por USB funciona solamente cuando la unidad está encendida. Nota: Para cargar sus teléfonos inteligentes (smartphones) y tabletas más rápido, ponga la pantalla de su dispositivo en estado de reposo. 10.
Funcionamiento Instalación del micrófono inalámbrico Para utilizar un micrófono inalámbrico, siga estos pasos de instalación: IR LED 1. Conecte las antenas UHF al Convoy. 2. Instale 2 pilas AA alcalinas nuevas en el micrófono inalámbrico. IR sensor 3. Ajuste el interruptor del Line/Mic/Wireless Mic a la posición del Wireless Mic para el canal que desea utilizar con el micrófono inalámbrico. RF LED 4. Aparee el micrófono inalámbrico con el Convoy. a. Encienda el Convoy y el micrófono inalámbrico.
Cómo aparear un dispositivo Bluetooth 1. Encienda su dispositivo Bluetooth. 2. Encienda el Convoy usando el interruptor de encendido. Si ya lo había conectado a otro dispositivo Bluetooth previamente, el Convoy se reconectará. 3. Presione el botón Bluetooth en Convoy para emparejarlo con un dispositivo Bluetooth. 4. Navegue a la pantalla de configuración de su dispositivo Bluetooth, busque Convoy y conecte. Cuando está "conectado," el LED de Bluetooth esté encendido permanentemente.
Solución de problemas Si el sonido está distorsionado: Pruebe bajando el control de volumen de su fuente de sonido, instrumento musical o micrófono. Pruebe también reduciendo el volumen general del Convoy utilizando la perilla de volumen maestro. Si hay demasiados graves: Intente ajustar el control de su fuente de sonido en Convoy y así sucesivamente para reducir el nivel de bajos. De esta forma podrá reproducir la música con más volumen antes de que se produzca el recorte (distorsión).
Guide d'utilisation (Français) Présentation Merci d'avoir fait l'acquisition de la Convoy. Chez Denon Professional, la performance et la fiabilité sont aussi importantes pour nous qu’elles le sont pour vous. C’est pourquoi nous concevons nos produits avec une seule chose en tête — faire de votre performance la meilleure qui soit.
Consignes de sécurité importantes Veuillez noter : Denon Professional et inMusic ne sont pas responsables de la mauvaise utilisation de leurs produits ou de l'utilisation faite de ces informations. Denon Professional et inMusic ne sont pas responsables de la mauvaise utilisation de leurs produits causés par le non-respect des procédures d'entretien et d'inspection. Veuillez également consulter le guide des consignes de sécurité et informations concernant la garantie inclus.
Installation 1. Veuillez vous assurer que tous les articles énumérés dans le Contenu de la boîte de ce guide sont inclus dans la boîte. 2. Veuillez lire le livret des consignes de sécurité et des informations sur la garantie avant d'utiliser le produit. 3. Veuillez vous assurer d'avoir complètement chargé la batterie avant la première utilisation afin d'augmenter sa durée de vie. 4. Veuillez vous assurer que le bouton volume général du Convoy est à zéro. 5. Mettez l'enceinte Convoy sous tension. 6.
Caractéristiques Panneau avant 13 1 1 1 4 WIRELESS MIC LINE MIC 2 3 TREBLE VOLUME 9 5 10 CHARGE 5V 1A BT/AUX 2 WIRELESS MIC LINE BASS 4 MIC BASS 2 MASTER TREBLE AUX IN VOLUME CONVOY PROFESSIONAL MOBILE PA/DIVERSITY RF SYSTEM/BLUETOOTH OFF CHARGE 6 VOLUME POWER ON VOLUME 7 100% 75% 50% 25% 0% 8 11 BATTERY LEVEL 12 FOR MAXIMUM BATTERY LIFE: -CHARGE FULLY BEFORE STORAGE -AVOID STORAGE IN FREEZING CONDITIONS -CHARGE BI-MONTHLY LINE OUT 1.
9. Port de rechargement USB : Branchez le câble de rechargement de votre périphérique à cette prise pour le recharger. Le rechargement de la pile par la connexion USB fonctionne uniquement lorsque l'appareil est allumé. Remarque : Pour recharger plus rapidement vos smartphones et tablettes, mettez l'écran de votre périphérique en veille. 10. Interrupteur d'alimentation : Met l'hautparleur sous et hors tension.
Fonctionnement Installation du microphone sans fil Pour utiliser le microphone sans fil, veuillez suivre les étapes suivantes : IR LED 1. Branchez les antennes UHF à la Convoy. 2. Insérez deux nouvelles piles alcalines AA dans le microphone sans fil. IR sensor 3. Réglez le sélecteur Line/Mic/Wireless Mic sur Wireless Mic du canal que vous souhaitez utiliser pour le microphone sans fil. 4. Jumelez le microphone sans fil à la Convoy. RF LED UP a.
Jumelage d'un périphérique Bluetooth 1. Veuillez mettre votre périphérique Bluetooth sous tension. 2. Allumez le Convoy avec l'interrupteur d'alimentation. Si vous avez précédemment jumelé un autre périphérique Bluetooth, l'enceinte Convoy se reconnectera à cet appareil. 3. Appuyez sur le bouton Bluetooth de Convoy pour établir une liaison avec un périphérique Bluetooth. 4. Accédez à l'écran de configuration de votre appareil Bluetooth, recherchez « Convoy » et lancez le jumelage.
Guide de dépannage Lorsqu'il y a de la distorsion : Essayez de diminuer le volume du périphérique audio, de l'instrument de musique ou du microphone. Essayez également de réduire le volume général de l'enceinte Convoy. Lorsqu'il y a trop de basses fréquences : Essayez de régler le niveau d’égalisation sur le périphérique source d’entrée audio et sur Convoy pour baisser le niveau des basses fréquences. Cela vous permettra d'augmenter le volume de la musique avant que l'écrêtage se produise.
Guida per l'uso (Italiano) Introduzione Grazie per aver acquistato l’Convoy. Per noi di Denon Professional, prestazioni e affidabilità contano moltissimo, proprio come per te. Ecco perché progettiamo i nostri dispositivi con un unico obiettivo in mente: rendere le tue prestazioni le migliori possibili.
Importanti precauzioni di sicurezza Nota bene: Denon Professional e inMusic declinano qualsiasi responsabilità per l'uso dei loro prodotti o per l'utilizzo errato delle presenti informazioni a qualsiasi scopo. Denon Professional e inMusic non sono responsabili per il cattivo utilizzo dei loro prodotti causato dalla mancata conformità con le procedure di ispezione e manutenzione. Fare riferimento al manuale di sicurezza e garanzia per maggiori informazioni.
Setup 1. Assicurarsi che tutti gli elementi elencati nel paragrafo Contenuti della confezione siano contenuti nella confezione stessa. 2. Leggere attentamente le istruzioni di sicurezza e garanzia prima di utilizzare il prodotto. 3. Per garantire la massima durata della batteria, assicurarsi di averla caricata completamente prima del primo utilizzo. 4. Assicurarsi che il volume Master del Convoy sia su zero. 5. Accendere il Convoy. 6. Collegare i dispositivi. 7.
Caratteristiche Pannello anteriore 13 1 1 1 4 WIRELESS MIC LINE MIC 2 3 TREBLE VOLUME 9 5 10 CHARGE 5V 1A BT/AUX 2 WIRELESS MIC LINE BASS 4 MIC BASS 2 MASTER TREBLE AUX IN VOLUME CONVOY PROFESSIONAL MOBILE PA/DIVERSITY RF SYSTEM/BLUETOOTH OFF CHARGE 6 VOLUME POWER ON VOLUME 7 100% 75% 50% 25% 0% 8 11 BATTERY LEVEL 12 FOR MAXIMUM BATTERY LIFE: -CHARGE FULLY BEFORE STORAGE -AVOID STORAGE IN FREEZING CONDITIONS -CHARGE BI-MONTHLY LINE OUT 1.
8. Uscita linea: Questa uscita TRS da 6,35 mm (1/4") può essere collegata a un ingresso ausiliario o a un mixer utilizzando. L’uscita di linea è post volume master. 9. Porte di carica USB: collegare a questo livello il cavo di ricarica del dispositivo per ricaricarlo. La carica tramite USB funziona unicamente quando l'apparecchio è acceso. Nota bene: per caricare smartphone e tablet più in fretta, mettere lo schermo del dispositivo in stand-by. 10.
Operazione Configurazione del microfono wireless Per utilizzare un microfono wireless, procedere alla configurazione come segue: 1. Collegare le antenne UHF al Convoy. IR LED 2. Inserire 2 batterie AA alcaline nuove nel microfono wireless. IR sensor 3. Posizionare l’interruttore Line/Mic/Wireless Mic su Wireless Mic per il canale che si desidera utilizzare con il microfono wireless. 4. Collegare il microfono wireless al Convoy. a. Accendere il Convoy e il microfono wireless. b.
Accoppiamento di un dispositivo Bluetooth 1. Accendere il dispositivo Bluetooth. 2. Accendere il Convoy utilizzando il interruttore di alimentazione. 3. Navigare nella schermata di configurazione del dispositivo Bluetooth, trovare Convoy e collegarlo. 4. Premi il pulsante Bluetooth su Convoy per associarlo a un dispositivo Bluetooth. L'LED di Bluetooth rimarrà illuminato quando è "accoppiato". Nota bene: Se il dispositivo richiede un codice o PIN, inserire 0000. 5.
Risoluzione di problemi Il suono è distorto: provare ad abbassare il volume della propria fonte audio, dello strumento musicale o del microfono. Inoltre, provare a ridurre il volume complessivo del Convoy utilizzando la comando Volume Master. Eccessivi bassi: prova a regolare il controllo EQ a livello della sorgente audio o Convoy per abbassare il livello dei bassi. Ciò permetterà di suonare la musica più forte prima che salti (che si verifichi distorsione).
Benutzerhandbuch (Deutsch) Einführung Vielen Dank für den Kauf des Convoy. Bei Denon Professional schätzen wir Leistung und Zuverlässigkeit – genau wie Sie. Darum entwerfen wir unsere Geräte stets nur mit einem einzigen Ziel vor Augen: Ihre Anwendung so gut wie möglich zu unterstützen.
Wichtige Sicherheitshinweise Bitte beachten Sie: Denon Professional und inMusic sind weder für die Verwendung ihrer Produkte noch für den Missbrauch dieser Informationen für beliebige Zwecke verantwortlich. Denon Professional und inMusic sind nicht für die missbräuchliche Verwendung ihrer Produkte verantwortlich, die durch verabsäumte Inspektions- und Wartungsarbeiten verursacht wurde. Bitte beachten Sie auch das mitgelieferte Handbuch für Sicherheitshinweise und Garantieinformationen.
Setup 1. Stellen Sie sicher, dass alle im Lieferumfang aufgelisteten Teile in der Verpackung enthalten sind. 2. Lesen Sie die Sicherheitshinweise und Garantieinformationen bevor Sie das Produkt verwenden. 3. Stellen Sie sicher, dass der Akku vor der ersten Verwendung vollständig aufgeladen ist, um eine maximale Akkulebensdauer zu erzielen. 4. Stellen Sie sicher, dass die Gesamtlautstärke des Convoy auf Null steht. 5. Schalten Sie den Convoy ein. 6. Anschluss Ihres Geräts. 7.
Funktionen Vorderseite 13 1 1 1 4 WIRELESS MIC LINE MIC 2 3 TREBLE VOLUME 9 5 10 CHARGE 5V 1A BT/AUX 2 WIRELESS MIC LINE BASS 4 MIC BASS 2 TREBLE MASTER AUX IN VOLUME CONVOY PROFESSIONAL MOBILE PA/DIVERSITY RF SYSTEM/BLUETOOTH OFF CHARGE 6 VOLUME POWER ON VOLUME 7 100% 75% 50% 25% 0% 8 11 BATTERY LEVEL 12 FOR MAXIMUM BATTERY LIFE: -CHARGE FULLY BEFORE STORAGE -AVOID STORAGE IN FREEZING CONDITIONS -CHARGE BI-MONTHLY LINE OUT 1.
8. Line-Ausgang: Dieser 6,35 mm TRS-Ausgang kann ein Hilfseingang oder an ein Mischpult angeschlossen werden Der Line-Ausgang ist ein Post-Master-Lautstärkereglerl. 9. USB-Anschlüsse: Schließen Sie das Ladekabel Ihres Geräts hier an, um es aufzuladen. Das Laden via USB funktioniert nur, wenn das Gerät eingeschaltet ist. Hinweis: Um Ihre Smartphones und Tablets schneller aufzuladen, bringen Sie den Bildschirm des Geräts in den Ruhemodus. 10. Netzschalter: Schaltet den Lautsprecher ein/aus.
Betrieb Funkmikrofon-Setup Um ein Funkmikrofon zu verwenden, gehen Sie folgendermaßen vor: 1. Schließen Sie die UHF-Antennen an Convoy an. 2. Stellen Sie sicher, dass 2 neue AA-Alkalibatterien im Funkmikrofon eingelegt sind. 3. Stellen Sie den Line/Mic/Wireless Mic -Schalter auf die Position Wireless Mic für den Kanal, den Sie mit dem Funkmikrofon verwenden möchten. 4. Koppeln Sie das Funkmikrofon mit Convoy. a. Schalten Sie Convoy und das Funkmikrofon ein. b.
Koppeln eines Bluetooth-Geräts 1. Schalten Sie Ihr Bluetooth-Gerät ein. 2. Schalten Sie den Convoy mit dem Netzschalter ein. 3. Navigieren Sie zum Setup-Bildschirm Ihres Bluetooth-Geräts, suchen Sie Convoy und verbinden Sie die Geräte. 4. Drücken Sie die Bluetooth-Taste am Convoy, um eine Verbindung mit einem BluetoothGerät herzustellen. Die Bluetooth-LED leuchtet dauerhaft, wenn die Geräte "gekoppelt" sind. Hinweis: Wenn Ihr Gerät die Eingabe eines Passcodes oder eines PINs anfordert, geben Sie 0000 ein.
Fehlerbehebung Der Ton klingt verzerrt: Drehen Sie den Lautstärkeregler an Ihrer Tonquelle, dem Musikinstrument oder dem Mikrofon zurück. Versuchen Sie auch, die Gesamtlautstärke von Convoy mit dem Gesamtlautstärkeregler zu reduzieren. Zu viel Bass: Passen Sie die EQ-Regler an Ihrer Klangquelle oder am Convoy an, um den Bass zu reduzieren. Dies ermöglicht Ihnen, die Musik lauter abzuspielen, bevor der Klang verzerrt.
Appendix (English) Technical Specifications Output Power 80 W (peak) Drivers Low-Frequency: 6.5” / 165.1 mm woofer High-Frequency: 2.0” / 50.8 mm tweeter Frequency Response 90 Hz – 20 kHz Connectors (2) Line/Mic channels with XLR-1/4” (6.35 mm) TRS combination input (1) 1/8” (3.5 mm) TRS/stereo Aux input (1) 1/4” (6.
Dimensions (height x width x depth) 13.8’’ x 16.2’’ x 9.4’’ / 351 x 412 x 238 mm Weight 16.5 lbs. / 7.7 kg Specifications are subject to change without notice. * Bluetooth and wireless reception and range are affected by walls, obstructions, and movement. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc. ** Battery life may vary based on temperature, age, and volume usage of product.
denonpro.com Manual Version 1.