Content 1. Overview .............................................................................................................................................................................................. 3 1.1. About this manual ................................................................................................................................................................. 3 1.2. Related document and data ..............................................................................
6.1. Storage ................................................................................................................................................................................ 14 6.2. Clean ................................................................................................................................................................................... 15 6.3. Treatment .........................................................................................................
1. Overview 1.1. About this manual For your safety, please read over this manual before riding INMOTION E-bike, and carefully watch the instructional video to correctly ride INMOTION E-bike. ∙ ∙ ∙ Knowing all the listed safety warnings and precautions will help you better ride the INMOTION E-bike. This manual is applicable of all INMOTION E-bikes manufactured by INMOTION TECHNOLOGIES CO., LTD.
2. Product Overview INMOTION E-bike is a kind of compact, effective and economic personal transport tool. Its fashionable and light structure design, as well as the lithium-ion power battery (high configuration) will provide you with joyful riding experience. 2.1. Serial No. Serial No. is the only TAG of this product, which is used for quality tracking, after-sales services, insurance claim and loss and confirmation etc. of the product.
2.3. Product parameter Name Model Max. speed Endurance Mileage Climbing Angle Net Weight Load Overall size Value Value Notes P1L/P1F The factory default of 20 km/h can be The factory default of 20 km/h can be under adjusted to 30km/h① adjusted to 30km/h① human body. The max. About45-50km(high configuration)/ About45-50km(high configuration)/ about 20km(low configuration)② about 20km(low configuration)② 12° 12° 12.5 kg (high configuration)/ 13 kg (high configuration)/ 12.
result Tire type Pneumatic tire, front 12 inch, back 10 Pneumatic tire, front 12 inch, back 10 inch. inch. Front-rear wheel disc brake (high Front-rear wheel disc brake for two configuration) / Rear disc brake (low configurations configuration) USB Discharge Dust & Water Proof Level IP54③ IP54③ 6 / 17 different endurance mileage. ③ Waterproof dust-proof IP54.
2.4.
2.5. Check the package box INMOTION E-bike-The original includes the following parts. Please check when opening. Any lack or loss, please contact the agency or INMOTION after-sales department. E-bike body Foot lever * 2 Product manual, warranty card, quality certificate Charger Warning ∙ Using non-recognized parts, or wrongly install the parts will damage the INMOTION E-bike, even cause personal injury.
Step 1 Step 2 Step 3 Step 4 9 / 17
2.7. APP This APP is specially designed for users by INMOTION based on the manufactured products, which can realize such functions as controlling the vehicle, making friends, releasing INMOTION articles, taking part in INMOTION activities, buying INMOTION accessories etc. Chinese name of INMOTION E-bike APP is: 乐行。 You can get this APP from our website or corresponding APP Store.
3. Charging 3.1. Charging method Step 1: The charge port is on the tail of the battery, see picture1 Step 2: Inset the charging port of the charger to that of the batter (please make sure the charge port is dry). Step 3: When the charger indicator turns red, it is charging; when it turns green, it is fully charged. After fully charged, please stop charging, as long-term charge will affect the service life of the battery. Step 4: After charging, please cover the charging port in case water in. 3.2.
∙ ∙ ∙ Please do not make the charger or cable contact sharp or high temp. articles. Please regularly make sight check to the charger and its cable If there is obvious damage of the charger or cable, in order to avoid further damage, please do not use the charger any more, and contact for exchange. ∙ Please do not personally repair the battery, charger or cable. Any questions, please contact us. 4. Ride INMOTION E-bike 4.0. Ride INMOTION E-bike INMOTION E-bike is a kind of technological travel tool.
∙ You need to find an open and flat place with the square of at least4m * 20m to practice riding, indoor and outdoor are OK. ∙ You need to have a deep understanding to the surrounding riding condition, in order to ensure not to be disturbed by the cars, ∙ You need a skilled assistant who is familiar to ride INMOTION E-bike and knows about all precautions and riding methods in ∙ Please do not test on smooth and wet ground. pedestrians, pets, bikes or other obstacles. this manual.
∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ ∙ When riding, please wear the helmet and protectors. Please do not climb slope over 12°, and do not sharply speed up or slow down on the slope. Be cautious to the obstacles and wet and smooth road, do not ride on grass or pebble road. Please do not ride in water over30mm. DO NOT ride up and down the steps. DO NOT ride in motorway. DO NOT soak in water. INMOTION E-bike belongs to single-use vehicle, please DO NOT ride by several people.
∙ It will automatically discharge when the INMOTION E-bike is not in use. The battery power should be checked at least every 3 month, and should be timely charged until it is full. Please do not keep it for long time, as it will cause invocatable loss (such as deep discharge of the battery) due to the battery without power. ∙ ∙ In winter, the battery will lose power faster due to the low temperature.
6.4. Inflation & Exchange Inner and Outer Tires Once there is insufficient air pressure, or there are different air pressures of the two tires, please timely inflate until both have the same air pressure. Factory default tire pressure of INMOTION E-bike is 2.8Bar of the front wheel, and 2.5Bar the rear. If the tire needs to exchange due to tire burst or other reasons, please contact INMOTION authorized agencies or INMOTION after-sales department (Also you can repair it in a bicycle maintenance shop) 6.5.
7. Contacts & Legal Information 7.1. Feedback Any questions or improvement advice from you or people around you when riding INMOTION E-bike, please feel free to contact us. We will listen to your advice and do our best to serve you. 7.2. Contact us ∙ ∙ ∙ INMOTION TECHNOLOGIES CO., LTD. Tel:4000-1000-12 Email:service@imscv.com 7.3.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.