ISC-007BW Smoker Controller
Contents 01 Introduction --------------------01 02 Specification -------------------04 03 Wireless Connection -----------05 04 Precautions --------------------10
01 Introduction 1.1 Description Press the knob to enter menu or confirm selection. Turn the knob to change between selections. Hold the knob to exit the menu page and back to home screen. Hold the knob to pause the fan before opening the lid. Power Port P1 Ambient Probe P2 Food Temp Probe P3 Food Temp Probe Foot Blower Fan 1.
1.3 Basic Operation 1.3.1 Main Page P1: 210 T: 225 P2: 130 F: 10 P3: 95 01:22 Home Screen P1:Current Grill Temp P2: Food Temp P3: Food Temp T: Target Temp F: Fan Power% : Timer Indicator Place the smoker controller on a stable and firm surface. Let the controller gradually increase the temperature, it will take 30-45 minutes to stabilize the grill temperature. 1.3.2 Menu Setting Click the Knob to enter Main Menu.
1.3.3 BBQ 1. Select “BBQ” from the Main Menu, and click to enter. 2. Rotate the knob to set a target temperature, then click the knob to confirm the target value, the controller will back to main interface and display BBQ status. SET TEMP 200 3. The maximum fan power is limited to 70% on smaller grills. Please set the fan, the temperature alarm, the temperature unit, the furnace size manually according to the above operations.
02 Specification ● Model: ISC-007BW ● Size: 11.42in*8.66in*5.51in ● Weight of the Controller: 6.84oz/194g ● Input Voltage: DC 12V/2A ● Short Time Measurement Range: from 0℃ to 300℃(32℉~572℉) ● Continuous Monitoring Range: from 0℃ to 250℃(32℉~482℉) ● Temperature Accuracy: ±1℃/±1.8℉ ● Calibration: ±12℉/±12℃ ● Connection Methods: support Wi-Fi connection and Bluetooth connection ● Type of Wi-Fi Network: 2.4GHz Wi-Fi (Support IEEE 802.
03 Wireless Connection 3.1 Get Inkbird Pro app for your phone Get the Inkbird Pro app from Google Play or App Store to download it for free, or you can scan the QR code to download it directly. Scan QR code to download Inkbird Pro APP 3.2 Account Registration Register before using the Inkbird Pro app. Select your Country/Region, enter your e-mail, a verification code will be sent to your mailbox, enter it to confirm your identity and the registration is done.
3.3 Wi-Fi Connection 3.3.1 Connect the smoker controller to your phone in Fast Flash Mode 1. Plug in the smoker controller, the controller will be turned on automatically. 2. Open the app and click “+” to start the connection, choose ISC-007BW from the device list. 3. Choose Fast Flash mode and make sure that the smoker controller is in Fast Flash mode. 4. Choose a preferred Wi-Fi network and enter the password to connect. 5.
Flash mode, click “Next step” to start the connection. 4. Choose a preferred Wi-Fi network and enter the password, then click “Confirm” to go to the next step. 5. Enter into your phone’s WLAN interface and connect to the "SmartLife XXXX" Wi-Fi network without typing in the password. Return to the app and confirm that the network has been successfully connected. 6. Wait for a few seconds and put the smoker as much as close to your phone while pairing. 7. Pairing Success! Note: 1.
to start the connection. 3. Wait for a few seconds and put the smoker as much as close to your phone while pairing. 4. Pairing Success. Note: Please turn on GPS on your Android phone as Google Play requires it to work fully. Once the device is successfully paired with your phone, you don’t need to pair it again unless you change your phone.
3.
04 Precautions The maximum temperature for short time measurement is 300℃/572℉ and the maximum temperature for long time measurement is 250℃/482℉, the probe and the metal wire will be burned out if the temperature go beyond the maximum number. Do not put probes or metal wire into fire or contact the heating tube directly. Do not put probes or the metal wire into water, it may lead to inaccurate measurements.
FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
INKBIRD TECH.C.L Support@inkbird.com www.inkbird.com Room 1803, Guowei Building, NO.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China V 3.
尺寸：80x160mm 修改内容： 1.去掉电话号码 2. 添加版本号 2022.01.05修改内容： 1二维码logo颜色更改 2. 更新版本号 3.
