尺寸:80mmX145mm 类型:骑马订 材质:50G书纸
Bluetooth &Wi-Fi Smart BBQ Thermometer IBT-26S
CONTENTS 01 Overview 02 Features & Specifications 03 Product Introduction 04 Wireless Connection 05 Battery Precautions 06 Bluetooth/Wi-Fi Specs 07 Product Accessories 08 FAQs 09 FCC Requirement 10 Product Warranty 1 1 3 6 17 19 22 23 24 26
01 Overview This smart BBQ thermometer comes with six temperature probes to measure the temperature of multiple foods and the oven temperature simultaneously. It features Bluetooth and Wi-Fi capabilities that allow us to control and monitor grilling from a smartphone. With the help of its temperature alarms and several smart functions, we can always grill aromatic, juicy, and delicious meats. 02 Features & Specifications Model Number: IBT-26S Product Dimensions: 88.80 X 87.20 X 23.
trigger mode. Alarm Interval: Settable in repeat trigger mode Probe Connector: Jack 2.5mm mono plug 11mm。 Number of Probe Channels: 6. Probe short time measurement temperature range: -20 ℃~+250℃。 Probe Continuous Monitoring temperature range: -30 ℃~+300℃。 Probe Temperature resolution: 0.1℉ Probe Temperature accuracy: ±0.5℃(maximum)form +25℃ ~ +140℃ ±1.0℃(maximum)form 0℃~ +185℃ ±1.5℃(maximum)from -10℃~ +250℃ ±2.
03 Product Introduction USB Type-C Port Battery State Bluetooth State Wi-Fi State Alarm Mute /ON state Probe Number Temperature Unit Current Temperature High and Low Temperature Alarm Ambient/ Oven Temperature 2 4 1 OVEN Timer 5 3 Probe Ports 3
Display Icon Reference Alarm Mute. Alarm sound ON. Wi-Fi is disabled. always on Wi-Fi is connected to the router and can access the network. Wi-Fi is connected to the router but cannot access the network. disappeared Slowly flash Fast flash Wi-Fi is paired with the network but cannot connect to the wireless router. Wi-Fi has entered the AP network configuration mode. Wi-Fi has entered the SmartConfig network configuration mode. Wi-Fi is initializing or has an error.
20%~39% of Battery level. flash flash flash 0%~19% of Battery level. Current temperature over Preset temperature alarm warning. Current temperature below Preset temperature alarm warning. The probe temperature exceeds 300℃ or 572℉. The probe temperature is below -30℃ or -22℉. flash Timer alarming Power Button Instructions Power On/Off: Press and hold the button for 3 seconds to turn the device on/off.
button to complete the pairing. Dismiss Alarm: When the temperature alarm is triggered, press the button to pause the alarm. Force Restart: When the device fails, press and hold the button for more than 10 seconds to forcibly restart the device. 04 Wireless Connection 1.Download the INKBIRD App Search the INKBIRD App from Google Play or App Store to get it for free, or you can scan the QR code below to download it directly. Scan QR code to download INKBIRD APP Note: 1.
(c) Registering an account is necessary before using the INKBIRD app for the first time. 2.Bluetooth Pairing Step1: Open the app and click “+” in the upper right corner to select IBT-26S to start the connection.
8
Step2: Turn on the device and click "NEXT STEP" to continue.
Step3: Make sure your smartphone has Bluetooth enabled, then click "NEXT STEP" to continue.
Step4: The app will automatically search for the device. Once the device is found, press the power button on the device to complete the pairing.
12
Step5: Select "Later" to complete Bluetooth pairing or click "Continue" to connect to Wi-Fi.
3.Wi-Fi Pairing If you choose to continue connecting to Wi-Fi in step 5, enter the Wi-Fi network name and password, then click "Confirm" to complete Wi-Fi pairing. Note that the 2.4GHz version should choose a 2.4Ghz Wi-Fi network, and the 5GHz version should choose a 5Ghz Wi-Fi network.
15
16
Notes: (a) Location services on the smartphone must be turned on during connection. In addition, the app needs permission to access location information. Otherwise, you will not be able to establish a Bluetooth/Wi-Fi connection. (b) Keep the smartphone, device, and router as close together as possible to set up a connection. (c) It is also possible to monitor the device on your phone by only establishing a Bluetooth connection.
Bluetooth connection without Wi-Fi enabled allows for longer battery life. Disabling Wi-Fi and no Bluetooth pairing can achieve a super long battery life. 3.Use a standard USB Type-C 2.0/3.0 data cable to charge the device. 4.Use a 5V 1A USB power adaptor to charge the device. In an environment of 23℃, the battery can be charged up to 45% within 60 minutes, and up to 80% within 120 minutes. 5.Working Environment: Discharging: -10℃~60℃, with highest humidity 90%RH.
longer be recharged. Conversely, storing the device with its battery fully charged may reduce battery capacity and shorten battery life. If you plan to store the device for more than six months, you should charge it to 50% battery capacity every six months and store it at a temperature between 0 ℃ and 30℃. 9.Do not use the device in a high-temperature or cold environment. 10.Do not use the device in an environment with high humidity, such as a bathroom, or in an environment where water may splash.
Number of Channels 1-14@2.4GHz (CH1-11 for US/CA, CH1-13 for EU/CN) 802.11b: 1, 2, 5.5, 11Mbps Data Rate WIFI 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11n: HT20 MCS0-7, HT40 MCS0-7 Security Maximum output power Maximum gain WEP/WPA/WPA2/WPA2 PSK (AES) WPA3 +17dbm@802.11b/g/n +15dbm@802.11a 2dBi@2.4G,2.6dBi@5G Notes: 1.
reset. After a Wi-Fi reset, if the device shuts down in the middle, once it restarts, it will also automatically restore the Wi-Fi network that was paired before the reset. If you want to remove the network configuration information, you can remove it through the App, so the device will not restore and reconnect to the Wi-Fi network that was paired before the reset. 4.When using the Wi-Fi function, keep the device as close as possible to the router.
purchase time, phone model, phone OS version, app version, device virtual ID, and screenshots/videos (if you have any). The more information we have, the faster we can help you solve your problem. 07 Product Accessories USB 2.0 Type-A to USB 2.0 Type-C charge cable,Type-C plug Connect to the device. Length:50cm(about 1.64ft) 5x Heat-resistant Food Probes 1x Heat-resistant Ambient Probe (Oven Probe) Probe cable length:1.2m(about 3.
3x Probe Clamps To fix temperature probes for more accurate detection. 08 FAQs Q: Why it is failed to connect to Wi-Fi network? A: (e) When the Wi-Fi icon on the device screen is flashing, it means the device is in network configuation. You can press and hold the power button for 3 seconds to enter the network configuration and then press and hold it for 3 seconds again to switch between AP mode (slow flashing) and SmartConfig mode (fast flashing). (f) Confirm whether your device supports a 2.
(k) Try connecting in another network configuration mode. (l) Restart the device and router, then try again. Q: Can I access the current temperature from anywhere in the world thanks to Wi-Fi as long as I have an internet connection? A: Yes, as long as your phone has access to the Internet, that's fine. Q: Why can't I charge the device? A: (a) Using a USB 2.0 Type-C charge cable. (b) The device only supports standard USB charging. Fast charging is not available. Q: Are these probes waterproof? A: No.
authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 10 Product Warranty This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge.
INKBIRD TECH.C.L. support@inkbird.com Factory address: 6th Floor, Building 713, Pengji Liantang Industrial Area, NO.2 Pengxing Road, Luohu District, Shenzhen, China Office address: Room 1803, Guowei Building, NO.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China V1.