说明书 骑马订 尺寸： ��mmX��mm
IBS-P01 Pool Thermometer 01- Introduction 02- Parameters 03- Basic Operation 04- App Control IBS-P01B Bluetooth Pool Thermometer
1. Introduction 2. Parameters Battery: 2*AAA 1.5V Battery(not included) Temperature Measurement Range: -40℃~70℃ /-40℉~158℉ Temperature Measurement Accuracy: ±1℃/±1.8℉ Temperature Display Accuracy: 0.1℃/±0.
3. Basic Operation 3.1 Buttons Twist off the lid of the thermometer as shown below, all the buttons of the thermometer are designed inside. ℃/℉: Press the button to switch the temperature unit between ℃ and ℉. CLEAR: Press the button to clear the history temperature data, the device will record the new maximum and minimum temperature after clearing the history data.
maximum&minimum temperature recording time interval between ALL-TIME and 24 hours. 3.2 Battery Installation Unscrew the lid of the thermometer as shown below. Remove the battery cover, install 2 AAA batteries, put the cover back.
Make sure the silicone waterproof ring is well placed, then close and tighten the lid of the thermometer. 4. App Control (IBS-P01B Only) 4.1 Download the app Android IOS Search “Engbird” in App Store or Google Play to download it for free, or you can scan the QR code above to install it directly. Note: Please make sure your phone supports Bluetooth.
4.2 Open the app, turn on Bluetooth.
4.3 Put the device close to your phone and click “Add Sensor” or “+” to add devices.
4.4 Choose a usage scenario and click “Done” to complete the connection.
4.5 The main interface of the app. App Setting Add Devices Battery Life Usage Scenario Current Temperature Delete Temp Diagram Sensor Setting Note: A mobile phone can be connected to multiple sensors at the same time and a sensor can be connected to multiple phones as well. 5. FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
INKBIRD TECH.C.L Support@inkbird.com www.inkbird.com +86-0755-22747857 4/F E, Bldg 713, Pengji Industrial Zone, Liantang St, Luohu Dist., Shenzhen, China.
