Instructions / Assembly

Important safety instructions：
• Please read carefully all instructions before assembling the accent bench.
• For your safety and ease, assembly by two or more adults is recommended.
• Keep instructions for future use.
Pre-assembly：
• Remove all parts and hardware from box.
Parts List
Item
Description
QTY
P1
Accent Bench
1
P2
Legs
2
Hardware List
Item Description QTY
H1 Boltsφ5/16*2-3/4"
6
H2 Lock Washers φ5/16"
6
H3 Flat Washers φ5/16"
6
H4 Allen Wrench
1
H5 Wood Plug
4
ASSEMBLY INSTRUCTIONS
Mason Accent Bench
• Do not discard any content until assembly is completed to avoid accidentally discarding small parts or hardware.
DRAWING
DRAWING
Thank you for your purchase
Page 1 of 1
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT
ALL HARDWARE IS KEPT TIGHTENED.
Step 1.Remove all the legs and hardware from small box.
Step 2.Turn the bench(P1) upside down and lay on protective carpet.Using bolts (H1), lock washers (H2), flat washers(H3), connect
legs(P2) to bench (P1). Tighten bolts (H1) with allen wrench (H4).
Step 3. Place the wood plug(H5) into the hole as
illustration.
Step 4. Place bench upright on a level surface.Assembly is complete.
P1
P2
H5
H2
H1
H4
H1
H4
H2
P1
P1
H5
P2
H3
H3