PromiESD01/ESD02™ User Manual Ver. 2.0 (2005.08.01) by Bluetooth Enabling Wireless Serial Communications © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Products Promi-SD/ESD Series Bluetooth Serial Adapter ESD01 Part Number ESD02 IP11-320 SD101 IP11-321 SD202 IP10-300 SD205 IP10-301 IP10-302 Description Board-type wireless serial adapter with MMCX antenna connector Board-type wireless serial adapter with onboard antenna External type wireless serial adapter with internal battery External type wireless serial adapter External type wireless serial adapter with dip switch Power Class Class1 Class2 Class2 Class
Promi-ESD User Manual – Products Promi-MSP Series MSP102B MSP102A Wireless MultiSerial Adapter ¨ Part Number IP20-400 IP20-401 Wireless multi-serial adapter Wireless multi-serial adapter COM port redirector supported Serial/IP COM port redirector supported Serial/IP Up to 7 links simultaneously Up to 14 links simultaneously Power Class Class1 Class1 RF Range Up to 100m Up to 100m Power Connector DC plug DC plug Power supply 5V 5V Serial connector Male DB9 Male DB9 Serial Inter
Promi-ESD User Manual – Products Accessories Antenna Power Supply Extension Cable SAT DAT PAT EAT IA60-800 IA60-801 IA60-802 IA60-820 Stub (30mm) Dipole (120mm) Patch (130¯90¯65mm) Board type (18¯6¯7mm) ESD01 use only EPA OPA UPA DPA IA70-840 IA70-841 IA70-860 IA70-861 External Power Adaptor Domestic use only External Power Adaptor International use USB power cable DC power cable RFC EEC SPC IA80-880 IA80-881 IA80-882 Antenna extension cable (1m) Antenna extension cable
Promi-ESD User Manual – Table of Contents Table of Contents Before Using the Product Welcome -------------------------------------------------------------7 Copyrights/Certification/Limited Liability ----------------- 7 Precautions and Safety ----------------------------------------- 7 General Terms and Conditions of Sale -------------------- 8 1.
Promi-ESD User Manual – Before Using the Product 6 Before Using the Product Welcome Copyrights/Certification/Limited Liability Precautions and Safety General Terms and Conditions of Sale get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Before Using the Product 7 Welcome Thank you for purchasing Promi-ESD products. Promi-ESD is a module for wireless serial communication using Bluetooth technology, the international standard for short range wireless communications. Its interoperability and credibility delivers the maximum benefits of wireless communication. This user manual is designed to help you use the Promi-SD series properly.
Promi-ESD User Manual – Before Using the Product 8 Do not drop or subject the module to impact. Damage to your products may result from improper use. Keep away from harsh environments including humid, dusty, and smoky areas. Damage to your ESD may result from improper use. Do not place heavy objects on the product. Damage to your products may result from improper use. General Terms and Conditions of Sale 1. GENERAL.
Promi-ESD User Manual – Before Using the Product 9 costs and damages finally awarded or agreed upon by Seller that are directly related thereto.
Promi-ESD User Manual – Getting Started 1. Getting Started Features of Promi-ESD Components Specifications get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Getting Started 11 Features of Promi–ESD Reliability and Interoperability Promi-ESD is a module device for wireless serial communication using the Bluetooth technology that is international standard of short range wireless communications. Promi-ESD accomplishes more reliable wireless communication. As Promi-ESD can communicate with other Bluetooth devices, user may construct various communications with it.
Promi-ESD User Manual – Getting Started Components Stub Antenna Promi-ESD01 Antenna Cable Promi-ESD01 Promi-ESD02 Promi-ESD02 Please check the components of Promi-SD in Fig. 1-1 when purchasing. The picture of product may differ by models. The components of the package may change for improving product capacity or quality without notice. © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Getting Started Specifications Specification Model name Promi-ESD01TM Promi-ESD02TM Input Voltage DC 3V∼3.3V DC 3V∼3.3V Bluetooth Spec Bluetooth™ Specification v1.1 Bluetooth™ Specification v1.1 Transmission Power 16dBm(Class 1) Max +4dBm(Class 2) RF Range Max 100m (Default Antenna) Max 30m (Default Antenna) Baud rate 1200 ∼ 230000bps 1200 ∼ 230000bps Power Consumption 75mA (input DC 3.3V) 48mA (input DC 3.3V) Operating -10 ∼ 70° -10 ∼ 70° 2400㎒ ∼ 2483.
Promi-ESD User Manual – Configurations 2. Configurations Operation Modes Serial Ports PromiWINTM Terminal Program get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Configurations 15 Operation Modes In addition to the serial port configurations such as bit/second, data bit, parity, stop bit, flow control, Promi-ESD has some configurations for Bluetooth. For getting the most out of Promi-ESD, user should understand the following Bluetooth connection schemes. A Bluetooth device can play a role as a master or slave. Master tries to connect itself to other Bluetooth device, and slave is waiting to be connected from other Bluetooth devices.
Promi-ESD User Manual – Configurations Promi-ESD in Mode1 cannot be discovered or connected by other Bluetooth devices. MODE 2 Promi-ESD is waiting for the connection from the last connected Bluetooth device. Promi-ESD in Mode2 is to be a slave and waiting for the connection only from the last connected Bluetooth device. Just like Mode1, if there is no BD address stored in Promi-ESD, the mode change from other operation modes to Mode2 is not allowed.
Promi-ESD User Manual – Configurations 17 Data Bit Promi-ESD supports only 8 data bit. In the case of 7 data bit, please contact the technical support. Hardware Flow Control Promi-ESD plugged into its host system transmits data from host to the other side Bluetooth device. These data is saved temporarily in the internal buffer of Promi-ESD and sent repeatedly until the transmission is completed packet by packet.
Promi-ESD User Manual – Configurations Configuration Software Configuration Software Usage Operating Platform PromiWIN Individual setup of PromiESD MS Windows 98SE or higher PromiWIN PromiWIN is a program running on Microsoft Windows for the configuration of Promi-ESD. Install PromiWIN on your computer. Plug a Promi-ESD into the serial port using RS232 jig board and turn on the power. Run PromiWIN. Set each option properly and click [Confirm].
Promi-ESD User Manual – Configurations 19 Serial port settings can be changed by and of PromiWIN in the menu bar at upper left corner of the window without re-running the PromiWIN program. The icons in the left side window come to the corresponding windows. In device configuration window, hardware reset can be executed or operation mode and RS232 can be configured as well. Security option also can be configured in this window. © 2005 Initium Co., Ltd.
Promi-ESD User Manual – Configurations 20 Promi-ESD has 4 response messages, ‘OK’, ‘ERROR’, ‘CONNECT’, and ‘DISCONNECT’. In some cases, these responses can affect the host system unexpectedly. To prevent this, user can set the response to ON or OFF. (AT Command) For Promi-ESD, hardware flow control can be configured only by bridge CTS and GND. Thus H/W Flow Control option will not work in this case. Click [Apply] button to reflect the given options to Promi-ESD actually.
Promi-ESD User Manual – Configurations 21 controlled. With 0 input for this waiting time, Promi-ESD keeps waiting for connection until [Cancel] button is clicked. Terminal Program A terminal program is an application that will enable a PC to communicate directly with a modem. If you are using Windows 98SE or higher version of Windows, HyperTerminal program as it is included as part of the operating system. Promi-ESD provides some extended AT commands for its configurations on terminal program.
Promi-ESD User Manual – Configurations 22 Choose the settings in File->Properties->Settings->ASCII setup that let you turn echo on in HyperTerminal; this will show the response Promi-ESD sends on the screen. You now get the HyperTerminal window where you are able to control PromiESD with AT commands. For expanded AT commands that Promi-ESD provides, please refer to Appendix A. AT commands.
Promi-ESD User Manual – Connections 3. Connections Promi-ESD Pin Assignment get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Connections Promi-ESD Pin Assignment Pin Assignment (Promi-ESD01) NC Status DSR DTR RST GND 7 8 9 10 11 12 1 2 3 4 5 6 CTS VDD GND TXD RXD RTS Pin no. Pin name Direction Description Signal Level 1 GND I Power Ground Ground 2 TXD O UART data out TTL 3 RXD I UART data input TTL 4 RTS O UART Ready to Send TTL 5 CTS I UART Clear to Send TTL 6 VDD I DC input (3.0 ~ 3.
Promi-ESD User Manual – Connections Pin Assignment (ESD02) Antenna GND 1 8 RXD VDD 2 7 TXD Status 3 6 RTS RST 4 5 CTS Pin no. Pin name Direction Description Signal Level 1 GND I Power Ground Ground 2 VDD I DC input (3.0 ~ 3.
Promi-ESD User Manual – Connections DCD : Status of Bluetooth connection will be delivered to Host PC via DCD line. When Bluetooth connection is made, DCD signal will be in state OFF. For disconnection of Bluetooth, DCD signal will become state ON. Connection Module low signal RST(Reset) : RST signal will be used for initialization of Promi-ESD. RST should be on 0V status for at least 1 second for this. Promi-ESD01 When TTL level of MICOM is 3.3V PROMI-ESD01 MICOM MICRO-VDD DC 3.
Promi-ESD User Manual – Connections PROMI-ESD01 MICOM MICRO-VDD DC 3.3V VDD Status MICOM-TXD RXD MICOM-RXD TXD CTS RTS DSR DTR MICOM-RST RST MICOM-GND GND When TTL level of MICOM is 5V PROMI-ESD01 MICOM MICRO-VDD DC 3.3V VDD MICOM-DCD Status 68KΩ 115KΩ MICOM-TXD RXD MICOM-RXD TXD 68KΩ 115KΩ MICOM-RTS CTS MICOM-CTS RTS 68KΩ 115KΩ MICOM-DTR DSR MICOM-DSR DTR 68KΩ 115KΩ MICOM-RST RST MICOM-GND GND © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Connections If you are using Reset. Promi-ESD02 When TTL level of MICOM is 3.3V © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Connections PROMI-ESD02 MICOM MICRO-VDD DC 3.3V VDD MICOM-DCD Status MICOM-TXD RXD MICOM-RXD TXD MICOM-RTS CTS MICOM-CTS RTS MICOM-RST RST MICOM-GND GND When TTL level of MICOM is 3.3V and not using hardware flow control PROMI-ESD02 MICOM MICRO-VDD DC 3.3V VDD Status MICOM-TXD RXD MICOM-RXD TXD CTS RTS MICOM-RST RST MICOM-GND GND When TTL level of MICOM is 5V © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Connections PROMI-ESD02 MICOM MICRO-VDD DC 3.3V VDD Status MICOM-DCD 68KΩ 115KΩ MICOM-TXD RXD MICOM-RXD TXD 68KΩ 115KΩ MICOM-RTS CTS MICOM-CTS RTS 68KΩ 115KΩ MICOM-RST RST MICOM-GND GND © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Trouble Shooting 31 4. Trouble Shooting get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Trouble Shooting 32 No Data Transmission COM Port Settings Check whether the Baud rate of Promi-ESD is same as that of its host equipment. If you do not know the current Baud rate of Promi-ESD, initialize it to 9600 by pressing Reset. Check whether the Data bit is set to 8. Promi-ESD supports only 8 Data bit. If your host equipment uses 7 Data bit and even or odd parity, it can work as if it uses 8 Data bit and No parity. This is valid only when both DCE devices are Promi-ESD.
Promi-ESD User Manual – Trouble Shooting 33 It takes 30msec approximately for a Promi-ESD to complete the data transmission to the other side Bluetooth device. This time delay cannot be reduced and would be bigger as the RF transmission environment is bad. Do not use Promi-ESD If your applications cannot allow this time delay.
Promi-ESD User Manual – Specifications 34 5. Specifications Bluetooth Interface Power Mechanical Dimensions Environmental Default Antenna VDD Power Consumption Wireless Coverage get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Specifications 35 BLUETOOTH Bluetooth Interface Bluetooth 1.1 specification compatible and qualified Protocol: RFCOMM, L2CAP, SDP Profiles: Serial Port Profile Radio Frequency: 2.4 ~ 2.4738GHz Number of Channels: 79 Transmission Power Class 2 (Promi-ESD02) Transmission Power Class 1 (Promi-ESD01) Data Transmission Rate: 380Kbps Max. UART Interface Output Interface UART Connector: 2.54mm Header 2x6 (ESD01), 2.
Promi-ESD User Manual – Specifications 36 Mechanical Dimensions Promi-ESD01 Promi-ESD02 Environmental Recommended Operational Temperature: -20℃ ~ 70℃ © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Specifications 37 Recommended Operational Humidity: 90% Max. Non-condensing Default Antenna (ESD01 default, ESD02 option) Type: Helical Frequency: 2,400 ~ 2,485GHz Gain: Max. 1dBi ±1 Impedance: 50Ω size: 30mm¯9mm (W¯D) weight: 3.5g Power Consumption Recommended Operating Conditions Operating Condition Min Max Operating Temperature Range -20°C 70°C VDD 3.0V 3.6V For safe operation, supply power of 3.3V.
Promi-ESD User Manual – Specifications 38 Output Voltage Input VOL output logic level low (lO = 4.0mA) - - 0.2 V VOH output logic level high (lO = -4.0mA) VDD-0.2 - - V Wireless Coverage The table below shows the average measuring results in open space. These results can vary according to the environmental conditions.
Promi-ESD User Manual – Appendix A AT Commands A-1 Appendix A. AT Commands Terminology Command Category Command Description Command Validity get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Appendix A AT Commands A-2 Terminology AT Command AT command set is the de facto standard language for controlling modems. The AT command set was developed by Hayes and is recognized by virtually all personal computer modems. Promi-ESD provides the extended AT command set to control and configure the serial parameters and Bluetooth connection. AT Response Promi-ESD replies to AT commands with 4 kinds of message, ‘OK’, ‘ERROR’, ‘CONNECT’ and ‘DISCONNECT’.
Promi-ESD User Manual – Appendix A AT Commands A-3 to Timeout in second Command Category Command Category RESET ATZ 2 AT&F 3 AT 4 AT+UARTCONFIG,b,p,s 5 AT+BTINFO? 6 AT+BTINQ? 7 AT+BTLAST? Mode 8 AT+BTMODE,n Status 9 +++ Information Connection Security Miscellaneou s S-REGISTER AT commands 1 SERIAL PORT BLUETOOTH Index 10 AT+SETESC,nn 11 ATO 12 AT+BTCANCEL 13 AT+BTSCAN 14 AT+BTSCAN,n,to 15 AT+BTSCAN112233445566 ,to 16 ATD 17 ATD112233445566 18 ATH 19 AT+BTK
Promi-ESD User Manual – Appendix A AT Commands A-4 28 ATSnn=mm Command Description 1 ATZ Response OK Purpose Software Reset Description This is the same effect as power off and on. This command disconnects Bluetooth device, and stops ongoing task. After rebooting, the status is decided by the preset operation mode. Some AT commands need ATZ to take effect.
Promi-ESD User Manual – Appendix A AT Commands A-5 Purpose Set Serial parameters Parameters Baudrate= 1200/2400/9600/14400/19200/38400/57600/115200/230 400 (Default=9600) Parity=N/E/O (Default=N) Stopbit=1/2 (Default=1) Description The Serial parameters can be set or changed. The factory default is 9600, N, 1. To take effect of this command, ATZ or power off and on.
Promi-ESD User Manual – Appendix A AT Commands A-6 Parameters n=0: MODE0 (Default) n=1: MODE1 n=2: MODE2 n=3: MODE3 Description When the operation status is ‘Pending’ currently, change the status to ‘Standby’ with AT+BTCANCEL prior to this command. To take effect of this command, ATZ or power off and on.
Promi-ESD User Manual – Appendix A AT Commands A-7 Description Escape sequence character set to ‘+’ by default is changeable. The parameter nn must be a printable character. 10 Reference +++, ATO Example AT+SETESC,42 ATO Response None Purpose Convert the operation status of ‘Standby’ to ‘Connect’ Description You can convert the operation status of ‘Standby’ to ‘Connect’ ready to transmit data.
Promi-ESD User Manual – Appendix A AT Commands A-8 Reference 13 ATD, AT+BTINQ?, AT+BTCANCEL AT+BTSCAN,n,to Response OK CONNECT 112233445566 or OK ERROR Purpose Wait for inquiry and connection from other Bluetooth devices for a given duration Parameters n=1: Allows Inquiry scan n=2: Allows Page scan n=3: Allows both of Inquiry scan and Page scan to= Time duration in seconds Description For the given to, Promi-SD is waiting for the inquiry and connection from other Bluetooth devices.
Promi-ESD User Manual – Appendix A AT Commands A-9 from the Bluetooth device with the given BD address. If the parameter of to is 0, it will wait forever. When connection is made with the Bluetooth device, SD response will be ‘CONNECT’ with its BD address. If there is no connection made within this time duration, SD response is ‘ERROR’ and the operation status becomes to ‘Standby’.
Promi-ESD User Manual – Appendix A AT Commands A-10 17 Reference AT+BTINQ?, AT+BTSCAN Example ATD000B530011FF ATH Response OK DISCONNECT Purpose Release the current connection Description The current Bluetooth connection is released normally. It takes about 30 seconds to detect an abnormal disconnection such as power off and moving out of service range.
Promi-ESD User Manual – Appendix A AT Commands A-11 AT&F 20 AT+BTCSD Response OK Purpose Clear the list of Bluetooth devices sharing the pin code Description This clears the list of Bluetooth devices with link key in flash memory. To take effect of this command, ATZ or power off and on because the main memory still has the list.
Promi-ESD User Manual – Appendix A AT Commands A-12 23 AT+BTNAME=$string Response OK Purpose Change device name Parameters $string= New device name (Default=”PSDv3b-445566”) 24 Description Promi-SD can have a user friendly name to identify easily. The name allows 30 alpha-numeric characters maximum.
Promi-ESD User Manual – Appendix A AT Commands A-13 Reference 27 AT&V ATSnn=mm Response OK Purpose Change S-register value Parameters nn= Address of S-register mm= New value of S-register Description Some S-registers are optimized for the overall performance and protected from an arbitrary change by user. When users try to change these S-registers, SD response is ‘ERROR’. For details of S-register, refer Appendix. B.
Promi-ESD User Manual – Appendix A AT Commands A-14 AT+BTSEC,Auth,Encr ◎ AT+BTLAST? ○ AT+BTMODE,n ◎ AT+BTNAME="Name" ◎ AT+BTKEY="nnnn" ◎ AT+BTINFO? ○ AT+BTLPM,n ◎ AT+BTSD? ○ AT+BTCSD ◎ AT+BTFP,n ◎ AT+UARTCONFIG,b,p,s ◎ AT+USEDIP? ○ ○ ○ ○ ○ ◎ Valid only when Promi-SD is not connected to other Bluetooth device. ● Valid only when Promi-SD is connected to other Bluetooth device. © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Appendix B S-Register B-1 Appendix. B S-Register get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Appendix B S-Register B-2 S-Register S-registers contain 46 parameters of Promi-ESD. These are stored in flash memory and sustained the values unless hardware reset is executed. The value of S-register can be accessed and changed with ATS command by user. Some S-registers not shown below are set to maximize the performance of PromiESD. Thus it is not recommended to change these S-registers. Change the value of S-register only in Standby status.
Promi-ESD User Manual – Appendix B S-Register B-3 S12=0, Promi-ESD does not clear the data buffer received from host system when disconnected. S12=1, Promi-ESD clears the data buffer when disconnected. S14: Enable DTR Transfer (default 1, ESD01 only) S14=0, DTR/DSR signal is transferred to loop-back. S14=1, DTR signal is transferred to DSR of remote device. S15: Enable Disconnect by DTR (default 0, ESD01 only) S15=0, DTR signal cannot release the connection.
Promi-ESD User Manual – Appendix B S-Register B-4 S46: BD Address of Last Connected Device This saves the BD address of the Bluetooth device connected most recently. © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Appendix.C RS232 interface Jig Board C-1 Appendix. C How to make a RS232 interface Jig Board get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Appendix.C RS232 interface Jig Board How to make a RS232 interfaced Jig Board © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Appendix.D Technical Support D-1 Appendix D. Technical Support get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
D-2 Promi-ESD User Manual – Appendix.D Technical Support Use this form to request technical support for Promi-ESD. Individual form should be filled out for each Promi-ESD in question. Referring to the example on separate sheet, please provide as much information as possible so we may resolve and respond to your inquiry promptly. When you have finished, submit this form by e-mail to support@initium.co.kr or by fax to +82 31 782-3230.
D-3 Promi-ESD User Manual – Appendix.
Promi-ESD User Manual – Appendix.E Regulatory Information E-1 Appendix E. Regulatory Information get UNWIRED, it’s easy! © 2005 Initium Co., Ltd. All rights reserved.
Promi-ESD User Manual – Appendix.E Regulatory Information E-2 FCC Compliance FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications NOT explicitly APPROVED by Initium Co., Ltd.
Promi-ESD User Manual – Appendix.E Regulatory Information E-3 Antenna These modular transmitters are for OEM integrations only. The end-user product will be installed in such a manner that only the authorized antennas are used.
