user’s guide Ingenico 7910
Contents 1 Presentation .................................................................................................. 5 1.1 1.2 2 Use ................................................................................................................. 9 2.1 2.2 2.3 3 Location of the terminal ....................................................................... 11 Battery pack set up .............................................................................. 12 Battery pack charging ..............
Ingenico 7910 Thank you for choosing an Ingenico product ! We hope that you will be fully satisfied with your new terminal. In order to fully meet the requirements of our different customer users, the new Ingenico terminal comes in different models: Ingenico 5100 – countertop Ingenico 5300 – hand over Ingenico 7300 – portable Your model, the Ingenico 7910 is an Indoor Wireless GSM/GPRS terminal.
1 Presentation Ingenico 7910 is an electronic payment terminal designed to accept payment using magnetic stripe and smart cards. The terminal box contains: Ingenico 7910 handheld the power supply, this manual, the EC compliance booklet. The model of the power supply unit depend on the country.
Ingenico 7910 1.
1.2 Keyboard details and functionality This chapter describes the key functions for a terminal with no specific application. Some keys can have other functions according to the applications that are present in the terminal.
Ingenico 7910 8
2 Use In this chapter, we assume that the terminal has been installed (battery charged with a maximum charge level) and initialised. For the battery charging refer to chapter 3 “Installation and starting”. Before to use the terminal, always check if the roll of paper is present ! In order to extend battery life, the Ingenico 7910 terminal goes automatically into stand-by pressed. * after a few dozen seconds. The terminal comes back on if the green key is 2.
Ingenico 7910 2.3 Changing the roll of paper Ingenico 7910 features an "easy loading" printer, for easy paper roll replacement. Switch the terminal off before doing this operation. Don’t touch the printer mechanism.
3 Installation and starting 3.1 Location of the terminal Ingenico 7910 is an Indoor wireless terminal supplied with a Lithium – Ion battery pack easy removable. It enables you to use i7910 for up to 200 transactions giving you enough power to ensure a complete working day. When discharged, do use the power supply unit to recharge the battery pack. The terminal should be recharge as soon as "low battery" appears on the screen. Once in charge, the terminal can be used. Operating temperatures +5°C to +40°C.
Ingenico 7910 3.2 Battery pack set up Don’t touch the terminal on battery connectors Hold the battery with the connectors facing downwards, Position the battery lugs in the two terminal housings, Press the battery to close; you should hear a "click".
