User Manual

ManualsBrandsIngenico Barcelona ManualsElectronicsIngenico I7910 Point of Sale Terminal

3.3 Battery pack charging



Only use the battery pack supplied with your terminal.



Remember to switch the terminal off before you handle the battery pack.

Your terminal is supplied with a removable rechargeable lithium-ion battery. This battery

recharges by connecting the terminal to the power supply.

The battery pack must never be manipulated except for changing it or for installing/

uninstalling the SAM or MMC-SD.

When manipulating the battery pack, the terminal must always be disconnected from the

external power supply.



Before removing the battery pack, first disconnect the power supply.



Please make sure battery pack is correctly put by switching on the terminal before

connecting it to the power supply.

During long breaks (breakfast, lunch, ) do connect the terminal to the power supply to

ensure a correct charge of the terminal.



For the battery charge status on the terminal screen, please refer to the application

user’s guide.



You can carry out up to 200 transactions with a fully charged battery (depends on the

ticket size and transaction duration).

Summary of content (12 pages)

PAGE 1
3.3 Battery pack charging Only use the battery pack supplied with your terminal. Remember to switch the terminal off before you handle the battery pack. Your terminal is supplied with a removable rechargeable lithium-ion battery. This battery recharges by connecting the terminal to the power supply. The battery pack must never be manipulated except for changing it or for installing/ uninstalling the SAM or MMC-SD.
PAGE 2
Ingenico 7910 3.4 Terminal connections i7910 Power supply LinkBox Connecting to the electric network The power supply unit supplied is specially designed for the terminal. Do not use any other unit. Connect the terminal to the power supply. Connect the power supply unit to the electric network. Disconnecting from the electric network Disconnect the power supply unit from the electric network. Power supply Power supply unit voltage: 11 to 25 V DC; current 0.7A (typ).
PAGE 3
.5 Installing a SIM card and a multimedia card (MMC) The SIM card connectors are located in the battery compartment located under the terminal.
PAGE 4
Ingenico 7910 Installing a multimedia card Open the Sim card connector, Keep the plastic pressed when inserting the MMC card, Removing a multimedia card 16 Press the lateral plastic and push the MMC to release it from the connector. Press the lateral plastic, Close the sim card connector.
PAGE 5
3.6 Troubleshooting The terminal does not turn on Check that the battery is charged. There is nothing on the receipt that comes out of the terminal Check that the roll of paper has been put in the right way (see chapter 2.3 “Changing the roll of paper”) The receipt is illegible Over a period of time, the print quality will deteriorate due to the accumulation of paper dust on the print head.
PAGE 6
Ingenico 7910 4 Recommendations 4.1 Security Your terminal fulfills the VISA security requirements, as well as high security requirements from Northern European and Asia-Pacific zone. In order to ensure that software integrity self-test is performed periodically, it is necessary to restart (disconnect-reconnect) the terminal at least once per day. 4.
PAGE 7
system handling your call controls both radio frequency and the power level of your cellular terminal. The device and its antenna(s) must not be collocated or operating with any other antenna or transmitter except Grant condition. Users are not permitted to modify this transmitter device. Any unauthorized change made to this device could void your authority to operate this device. 4.
PAGE 8
Ingenico 7910 Before using your terminal in a vehicle powered by liquefied petroleum gas (such as propane or butane) ensure that the vehicle complies with the relevant fire and safety regulations of the country in which the vehicle is to be used. 4.5 WEEE This symbol on the product or on its packaging means that this product should not be treated as household waste.
PAGE 9
5 Index B M Battery .................................................. 9 Battery pack charging ......................... 13 Magnetic stripe card ..............................9 P C Card reading ......................................... 9 Charge level........................................ 13 Connecting to the electric network ..... 14 Connections ........................................ 14 Paper roll .............................................10 Power supply .......................................
PAGE 10
Ingenico 7910 22
PAGE 11
NON CONTRACTUAL DOCUMENT INGENICO owns exclusive rights on this document. All diffusion, all copies, all entire or partial production by any process, as long as it is made without the authorization of INGENICO, the promoter, will be considered as illicit, and will form an infringement, penalized by the clauses L.335-2 and following, of the « Code de la propriété intellectuelle ». INGENICO keeps the right without notice to modify the characteristics and the functions of this device.
PAGE 12
Your contact 192 avenue Charles de Gaulle 92200 Neuilly sur Seine France Tel. : +33 (0)1 46 25 82 00 – Fax : +33 (0)1 47 72 56 95 www.ingenico.