USER GUIDE RP750x ROAM– 280 Summer St, Boston, MA 02210 Phone: +1.888.589.
Contents 1. Introduction __________________________________________________ 3 2. Unpacking ___________________________________________________ 4 3. Recommendations _____________________________________________ 5 3.1. Safety _______________________________________________________________ 5 3.2. Security of your terminal _______________________________________________ 5 3.3. FCC & IC Compliance. __________________________________________________ 6 3.4.
1. Introduction Thank you for choosing a ROAM mobile payment terminal. We recommend that you to read carefully this installation guide: It will give you the necessary information about safety precautions, unpacking, installation and maintenance of your terminal. WARRANTY / SECURITY In order to benefit from the product‐related guaranteeand to respect security, we ask you to use only accessories delivered in box with the product, entrusting maintenance operations only to an authorized person.
2. Un npackin ng ADVICE Carefully keep k the RP750x originaal packaging g. It must be e re‐used whenever the e terminal iss shipped. RP750x ran nge includess RP750x, RP P750c, RP755x, RP755c, RP757x, RP7757c devicess Following items are included in the RP750xbo ox: The RP750x x terminal µUSB B cable T This User guide An optionaal audio cablle might also o be include ed for termin nals that sup pport communication with third part device via audio jacck.
3. Recommendations 3.1. Safety Lithium battery RP750xis fitted with a lithium battery which is not accessible to the user. Only a qualified technician is authorized to open the unit and change this component. Battery RP750x is fitted with a rechargeable Lithium‐ion battery specifically designed for this terminal. It is not accessible to the user. • Only use chargers with rating that match the power ratings. • Do not attempt to open the terminal. • Do not store your terminal unattended in a vehicle.
3.3. FCC & IC Compliance. FCC & CEhas a specific naming. The references uses for FCC & CEcertifications are: RP750x: • FCC_ID: XXXX‐XXXXX • CE: XXXX‐XXXXX Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.
This equipment is compliant with: • System specification – BLE 4.
3.5. Main Characteristics The main technical characteristics of RP750xare: Weight 95.35g Dimensions(L x w x h) 101.2mm x 56.
4. Installation and connection For following part of the user guide, the RP750x is named Terminal while the device which may be paired with RP750x(tablet, smartphone, PDA) is name Third Party Device. 4.1. Functional description The Terminalis a secure EMV Chip & PIN mobile payment pinpadto be used via Bluetooth or audiojackwith third partydevices. The Terminalallows merchantsto convert asmartphoneor a tablet into a powerful & secure POS solution.
RP750x is a mobile terminal. Alw ways place the terminal away from any source ofheat and d protected from dust, vibrations and a electrom magnetic rad diations (aw way from beamers, anti‐‐ shoplifting g barriers, ...). Cardholder should alw ways enter PIN (Personal Identificatiion Numberr) in such a way w to make e PIN spying g impossible. 4.4. P Power on n t pre ess the GreenButton loccated on the terminal. To power on the terminal RP750x po owers off on n its own affter a time.
4.5. 4.5.1. Connection USB cable connection A µUSB connector is located on the bottomof the terminal. • Present the device in front of the connector and plug it CAUTION Use only ROAM cable or accessory not to void warranty. 4.5.2. • Cable disconnection Present the device in front of the connector and unplug it.
5. Daily use 5.1. Getting started with RP750x • Switch on the terminal by pressing the Green keylocated on the right hand side of the terminal • Follow the terminal initialization procedure. This procedure differs from a customer to another. Please refer to your payment service provider. 5.2. Using Bluetooth on RP750x Bluetooth is enabled by long pressing the Bluetooth button for 2 seconds. The Bluetooth button can be found in the lower left corner of the keypad.
5.3. Termin nalkeypad d RP750x keypad consissts in 15 keyss.
5.4. Card reading 5.4.1. Swiping a card • Insert the card manually in the swiping slot at the top of the terminal, magstripe‐ facingup, as illustrated below. Swipe the card with constant speed, not too slow not too fast, for optimum reading accuracy. 5.4.2.
6. Maintenance ATTENTION Before any maintenance operations on the terminal, make sure that all cables are disconnected. 6.1. Cleaning of the terminal First of all, unplug all cables from the terminal. Good rules for proper cleaning of the terminal are: • Do not clean the electrical connections. • Do not use in any case solvents, detergents, alcoholic or abrasive products as those materials will damage the plastic or electrical contacts. • Avoid exposing the terminal to direct sunlight.
6.4. Environment (WEEE, Batteries and Packaging) This product is labeled in accordance with European Directives 2002/96/EC concerning Waste Electrical and Electronic Equipment (WEEE) and 2006/66/EC concerning Batteries and Accumulators.Those provisions are requiring producers and manufacturers to become liable for take‐back, treatment and recycling upon end of life of equipment and batteries.
“This Document is Copyright © 2013 by ROAM. ROAM retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of ROAM.