Compact Multiple Reader iUC280/285/250 900018665 R11 000 04 www.ingenico.com 28/32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico – S.A.
Contents 1 Introduction ........................................................................................ 3 2 Installation.......................................................................................... 4 2_1 Safety .................................................................................................................. 4 2_2 Security of your terminal ..................................................................................... 4 2_3 Integration (see integration guide ) ...
1 Introduction Thank you for choosing a payment terminal Ingenico. We recommend you to read carefully this installation guide: It gives you the necessary information about safety precautions, unpacking, installation, and maintenance of your terminal. Merci d'avoir choisi un terminal de paiement Ingenico.
2 Installation 2_1 Safety Power on/Power down To power on or power down the iUC280/285/250 connect or disconnect the USB cable. Lithium battery The iUC280/285/250 is fitted with a lithium battery which is not accessible to the user. Only a qualified technician may be authorized to open the unit and change this component. For switzerland annex 2.15 of SR 814.81 applies for batteries. SAM, MMC connectors They are operator accessible parts.
NEVER ask the customer to divulge their PIN Code. Customers should be advised to ensure that they are not being overlooked when entering their PIN Code. 2_3 Integration (see integration guide ) See installation guide.
3 Maintenance CAUTION Before making any operations of maintenance in the terminal, make sure that power supply is disconnected. ATTENTION Avant toute opération de maintenance du terminal, s’assurer que l’alimentation électrique est déconnectée. Cleaning of the terminal First of all, unplug all the wires from the terminal. Nettoyage du terminal Avant cette opération, débrancher tous les câbles du terminal.
3_2 Environment (WEEE, Batteries and Packaging) This product is labeled in accordance with European Directives 2002/96/EC concerning Waste Electrical and Electronic Equipment (WEEE) and 2006/66/EC concerning Batteries and Accumulators. Those provisions are requiring producers and manufacturers to become liable for take-back, treatment and recycling upon end of life of equipment and batteries.
4 Standards 4_1 EC marking The EC marking indicates terminal complies with harmonized standards and requirements of European Directives on: R&TTE Directive 1999/5/EC. The Radio and Telecommunications Terminal Equipment Directive o Radio : ETSI EN 300 330-2 V1.5.1 (2010-02) - Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) o EMC : ETSI EN 301 489-1 V1.9.2 (2011-09), ETSI EN 301 489-3 V1.6.
Information to users: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
“This Document is Copyright © 2015 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO.