User Guide Product name: IPP3x0-01Txxxxx Ingenico – 190-192 Avenue Charles de Gaulle 92200 Neuilly sur Seine Tél.
Contents 1. Introduction _________________________________________________ 3 2. Unpacking __________________________________________________ 4 3. Recommendations __________________________________________ 4 3.1. Security_____________________________________________________________4 3.2. Security of your terminal _____________________________________________4 3.3. EC standard compliance marking ___________________________________5 3.4.
1. Introduction Thank you for choosing a payment terminal Ingenico. We recommend you to read carefully this installation guide: It gives you the necessary information about safety precautions, unpacking, installation, and maintenance of your terminal. WARRANTY / SECURITY To benefit from the guarantee-related product, and to respect the security, we ask you to use only accessories delivered in box with the product, entrusting maintenance operations only to an authorized person.
2. Unpacking ADVICE Carefully preserve the packaging of the IPP3X0-01TXXXXX. It must be re-used whenever the terminal is shipped. According to the model, the following items are included in the IPP3X001TXXXXX box (including optional accessories): • The IPP3X0-01TXXXXX terminal • This installation guide • The IPP3X0 cradle (optional) • The connection cable or adaptor (optional) • The application user guide (optional) 3. Recommendations 3.1.
CAUTION NEVER ask the customer to divulge their PIN Code. Customers should be advised to ensure that they are not being overlooked when entering their PIN Code. 3.3. EC standard compliance marking EC standard compliance marking certifies that the product stipulated below: IPP3X0-01TXXXXX • conforms to the following harmonized standards : – IEC/EN 60950-1: Electrical safety of data processing equipment including electrical office equipment. Issue dec.
3.5.
4. Installation and connection 4.1. Positioning the terminal Install the terminal on a flat surface, with an easy access to an electrical outlet if needed. Place the terminal away from any heat source and protected from dust, vibrations and electromagnetic radiations (away from video terminals, PC, antishoplifting barriers, ...). 4.2. Connections A connection area is located on the rear of the terminal.
Cables and accessory are able to be fixed with two M2.5x8 screws (not included in the package) CAUTION Use only Ingenico cable or accessory not to void warranty. 4.2.2.
4.2.3. Installation of the Magic Box (optional) ADVICE It is strongly recommended to attach the “Magic cable” to terminal’s work area in order to reduce stress on the terminal and connection.
4.3. Installing SAM (Secure access module) and MicroSD Card CAUTION : Before starting, switch off the terminal by disconnecting the power supply or the link to the host In order to access the SAM card you must first remove the SAM compartment cover located at the back of your terminal. • Press the two clips of the cover and open the cover. • Insert completely the MicroSD Card into the slot marked (MicroSD) as indicated on the figure.
Replace the cover as illustrated by the procedure below: SAM door is able to be fixed with one M2.5x8 screw (not included in the package) 4.4. Installing contact less module CAUTION: Before starting, switch off the terminal by disconnecting the power supply. • Open the cover as indicated at chapter 4.
Do not force at the insertion.
5. Daily use 5.1. Keypad functions 1 2 1 2 3 4 5 5 4 3 NAVIGATION keys in the menus – Interactive keys for use between the screen CANCEL key (red) CLEAR key (yellow) VALIDATION key (green) Dot Key 5.2. Adjusting the contrast No contrast management for the Color display The screen of your chart is 128 x 64 pixels, illuminated with white light.
Keep pressing the keys as long as necessary. 5.3. Card insertion 5.3.1. Swiping a card • Insert the card manually in the driver, magstripe-facing right. Swipe the card with constant speed, not too slow not too fast, to maximize the reading and avoid annoying repetitions. 5.3.2. Inserting a chip card • Chip Cards should be inserted into your terminal as illustrated with the chip facing up and into the card reader 5.3.3.
6. Maintenance ATTENTION Before making any operations of maintenance in the terminal, make sure that power supply is disconnected. Cleaning of the terminal First of all, unplug all the wires from the terminal. Good rules for proper cleaning of the terminal are: • • • • • Use a soft cloth that is very slightly soaked with soapy water to clean the outside of the terminal. Do not clean the electrical connections.
6.3. End of life The product belongs to the family of electrical and electronic equipment. Therefore, it is subjected to the WEEE directive which requires the collection and the recycling at the end of life product. The Ingenico products present the symbol for the marking of electrical and electronic equipment as required by the WEEE Directive.
“This Document is Copyright © 2010 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO.