USER GUIDE Intelligent Docking Station for iSMP3 IMP400 Ingenico – 28-32 Boulevard de Grenelle 75015 PARIS Tél.
Contents 1. Introduction ____________________________________________ 3 2. Unpacking _____________________________________________ 4 3. Recommendations ______________________________________ 5 3.1. Security ______________________________________________________ 5 3.2. Approvals and markings__________________________________________ 6 3.3. EC standard compliance _________________________________________ 7 3.4. FCC and IC compliance __________________________________________ 8 3.5.
1. Introduction Thank you for choosing an Ingenico product. We recommend you to read carefully this installation guide: It gives you the necessary information about safety precautions, unpacking, installation, and maintenance of your terminal accessory. WARRANTY / SECURITY To benefit from the guarantee-related product, and to respect the security, we ask you to use only accessories delivered in box with the product, entrusting maintenance operations only to an authorized person.
2. Unpacking 2.1. Inside the Box ADVICE Carefully preserve the packaging of the IMP400. It must be re-used whenever the accessory is shipped. The following items are included in the IMP400 box: IMP400 Intelligent Docking Station for iSMP3 This User guide POWER SUPPLY UNIT (PSU) WARNING The power supply unit provided with your equipment is specially designed for Ingenico terminals. Do not use any other power supply.
2.2. Indicators on the IMP400 There are several indicators on the product, allowing the operator to quickly assess the state of the product, as well as the individual state of docked iSMP3’s. The main status LED indicates the state of the Docking Station. The serial number sticker provides a unique identifier, allowing to discern a single Docking Station among the fleet. Finally each slot’s blue and green/red LEDs indicate the connectivity and charging state of each docked iSMP3.
3. Recommendations 3.1. Security IMP400 is specially designed for iSMP3 terminals charging. Do not short-circuit the metallic contacts. Do not attempt to open the product or the PSU. Do not attempt to replace the PSU by any other type even the characteristics are similar. In case of abnormal behaviour disconnect the main power cord from the wall plug.
Indicates a device’s compliance with applicable Australian Communications and Media Authority (ACMA) technical standards—that is, for telecommunications, radio communications, EMC and EME Indicates that the product has been tested against EMC and safety standards for Taiwan market Compulsory safety mark for many products imported, sold or used in the Chinese market Indicating a power supply meets the level V energy efficiency requirements.
3.4. FCC and IC compliance This product is registered to the Federal Communication Commission under reference: FCCID: XKB-IMP403. Compliance Statements: FCC: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4. Installation and connection 4.1. Functional description The IMP400 is an Intelligent Docking Station (iDS) accessory for iSMP3 terminal. For each of 6 iSMP3 it provides both a 5V 2A power source able to supply the iSMP3 and associated iPhone6, and connectivity between the iSMP3 and the monitoring PC or server. Charging and data pads used with charging dock (Bottom view) 4.2. Connectivity The IMP400 possesses: 2 RJ45 Ethernet sockets compatible with 10/100Base-T/TX Ethernet.
4.4. Cables connection WARNING Connect all data cables to the device BEFORE plugging the PSU into the power outlet. Plug the Power Jack Plug the first Ethernet connector. Pass the cable under the Power Jack, and clip it into the cable guide. If needed, plug the second Ethernet connector and clip the cable in the other cable guide, on the other side of the product.
4.5. Fixing the cradle on its support The IMP400 is equipped with keyholes fixations on the bottom in order to fix it to its support, if need be. Keyhole fixations on the IMP400 casing (bottom view) Location of the keyhole fixations The center distance between the two fixations is 340mm. Mounting instructions: Place 2 screws or other fixing devices 340mm from each other, on the intended support of the IMP400. Align the widest part of each keyhole with the corresponding screw, and lower on the support.
4.7.
5. Maintenance WARNING Before making any operations of maintenance in the terminal, make sure that power supply is disconnected. 5.1. Cleaning of the cradle First of all, unplug all the wires from the terminal. Good rules for proper cleaning of the terminal are: Use a soft cloth that is very slightly soaked with soapy water to clean the outside of the cradle. Do not clean the electrical connections.
5.4. Environment (WEEE, Batteries and Packaging) This product is labeled in accordance with European Directives 2002/96/EC concerning Waste Electrical and Electronic Equipment (WEEE) and 2006/66/EC concerning Batteries and Accumulators. Those provisions are requiring producers and manufacturers to become liable for take-back, treatment and recycling upon end of life of equipment and batteries.
“This Document is Copyright © 2015 by INGENICO Group. INGENICO retains full copyright ownership, rights and protection in all material contained in this document. The recipient can receive this document on the condition that he will keep the document confidential and will not use its contents in any form or by any means, except as agreed beforehand, without the prior written permission of INGENICO.