Version May 1999 U ser's Manual Version May 99 ELITE 770 * 1
Terminal ELITE 770 2
INGENICO 9, quai de Dion Bouton 92816 Puteaux cedex RCS Nanterre B 317 218 758 - SIRET 317 218 758 00033 DIV0510A Version May 1999 Table of contents I- PRESENTATION OF THE TERMINAL 5 1- Introduction 5 2- The Terminal 6 3- The connections 6 4- The Keyboard - Principles of Utilisation 8 5- The Card Reader 9 6- Portable Functioning 9 II- ELITE 770 TECHNICAL OVERVIEW 11 1- Terminal feature 11 2- Display 11 3- Printer 11 4- RS232 Interface 12 5- RS232 Connection 12 6- Modem 13 7-
Terminal ELITE 770 4- Configuration Receipt 19 5- Option « Table Number » 19 6- Application Software Downloading Procedure 20 IV- SECURITY RECOMMANDATIONS 4 21
Version May 1999 I- Presentation of the terminal 1- Introduction The ELITE 770 is a portable payment terminal. This terminal was created to process all payments made by magnetic or smart cards. The ELITE 770 terminal benefits from a modular conception which permits it to treat all cards of different types using separate corresponding programs. It is therefore important to understand the manner in which it functions, at the modular and the terminal level.
Terminal ELITE 770 2- The Terminal The terminal case conta ins the following elements : The portable terminal itself, • A base. • The cable that connects the terminal to a telephone line. • The block sector that connects the terminal to a 115 or 230 volts power point (depending on the country) 3- The connections 0 Telephonic Connection The compact telephonic cable connection that is supplied with the Elite terminal, must be introduced into the terminal plug, marked with the symbol .
Version May 1999 The ELITE 770 terminal must be powered off before connecting the cable on the base, to the RS232 port..
Version May 1999 4- The Keyboard - Principles of Utilisation • The key permits the operator to access the corresponding modular level functions • The and keys permit to access to the terminal level functions and to the system menu • The key ↑ permits a paper feed of a couple of centimetres • The GREEN key permits the validation of any information read by or entered into the terminal • The RED key cancels the occurring command after which, it returns the terminal to the idle state • The YELLOW key deletes
Version May 1999 5- The Card Reader 0 Magnetic Stripe Card The card can be read either swiped from right to left, or from left to right. The magnetic track on the card turned on the rear side of the terminal and the card should be swiped through the track reader freely and without hesitation. 0 Micro Chip Card Introduce the card horizontally into the apparatus, the micro-chip facing up, as indicated and leave the card in position for the length of time that it takes to process the transaction.
Terminal ELITE 770 configuration) of the network. If the problem persists, switch off the base and call your maintenance company. Before the first use of the terminal, batteries must be loaded during at least 14 hours.
Version May 1999 II- ELITE 770 TECHNICAL OVERVIEW 1- Terminal feature The ELITE 770 version has the following features : • • • • • • • • • • • • • • • 2- Up to 1Mbyte Battery backed-up RAM with advanced memory protection 512 bytes EEPROM INTEL compatible 8051 CPU Battery backed-up calendar Buzzer 18 keys keyboard Track 2 Card Reader (Optional Track 2 & 3 or 2 & 1) ISO 7816 Smart Card Reader 1 RS232 port for an ECR connection or external device connection Built-in Modem CCITT V22, V22 bis Automatic to
Terminal ELITE 770 4- RS232 Interface Logic level (RS 232C level) : • logic level « 0 » : -8V • logic level « 1 »: +8V • minimum « 0 » level on input : -3V • minimum « 1 » level on input : +3V • maximum current : 10 mA standard interface : 5- • rate : 300 to 19200 bauds • format : 7 to 8 bits • parity: odd, even, none • interface: V28 RS232 Connection 6 1 12 1 þ N.
Version May 1999 6- Modem The Modem fulfils the data exchange function between the system and telephone network. It is a full-duplex asynchronous modem complying with CCITT V22 & V22 bis recommendations. The MODEM is connected (through the base) to the telephone network by a removable cord fitted with a telephone connector which is plugged into the telephone wall socket.
Terminal ELITE 770 0 SIM Installation • • • • • Slide the card holder cover, Turn over the cover Insert a SIM card into the card holder, Shut the cover Slide the cover to lock 0 SIM Removal • • • • • 8- Slide the card ho lder cover, Turn over the cover Remove SIM card from the card holder, Shut the cover Slide the cover to lock Technical Specifications 0 Power Supply.
Version May 1999 0 Terminal • Dimensions H x D x W • Operating Temperature • Humidity 210 x 92 x 68 mm +5oC to +40oC 20% to 90% No Condensation 0 Radio communication • • • • • Type Bandwidth Emitting power Channels Range Half-duplex ISM 433,9 MHz ≤10 mW (Don’t need license) 15 (100 kHz between channels) ≈ 100 meters (open air) ≈ 40 meters (typical) 15
Terminal ELITE 770 III- PROCEDURES OF INSTALLATION After having made the connections previously described, the operator can switch the terminal on. Before doing this, the operator is obliged to enter all general data at the terminal level. 1- Configuring Radio Link IMPORTANT NOTE : The following configuration is not necessary for a single configuration (one base, one terminal), as it has been carried out during production.
Version May 1999 2- Entering the Date and the Time In its dormant state the terminal indicates its version of the date and time. The date and time modification procedure will not be carried out if the date and time are incorrect. N° 1 DISPLAY/PRINTING CARD >>> ACTION Press the key 21/07/99 18 :32 2 SYSTEM MENU Press the GREEN key CHANGE DATE TIME 3 DATE : 21/07/99 Enter the current date (character « / » is automatically inserted).
Terminal ELITE 770 3- Telephone Network Parameters With regard to the following points ; if the value already present in the apparatus is correct, the value will be validated without having to enter a new one. N° 1 DISPLAY/PRINTING CARD >>> 21/07/99 18 :32 2 SYSTEM MENU ACTION Press the or keys key and select the function by Press the GREEN key CHANGE PAD PAR. 3 SYSTEM MENU (up to 4 char) The current value is displayed.
Version May 1999 4- Configuration Receipt This receipt put together the hardware and the software status of the terminal. N° 1 2 DISPLAY/PRINTING CARD >>> ACTION 21/07/99 18 :32 Press the key and select the function by or keys SYSTEM MENU Press the GREEN key CONFIGURATION 3 The terminal prints a receipt 4 CARD >>> 21/07/99 18 :32 5- Option « Table Number » This function is used in a restaurant environment.
Terminal ELITE 770 6- Application Software Downloading Procedure This function allows the remote downloading of a new software application version. The terminal call the host which contains the new required version of the application.
Version May 1999 IV- SECURITY RECOMMANDATIONS 0 This terminal has no power switch. The power supply is the only device used to switch off the terminal. Of this fact the main power must be easily accessible.
ELITE 770 Terminal 22
Version May 1999 23