Oh’Care Bluetooth Bridge Bluetooth RS 232C Serial Dongle User’s Manual Ver. 1.0 (2017.06.
Oh’Care Bluetooth Bridge Contents 1. The Product ......................................................................................................................................................................... 3 1-1. The Overview .......................................................................................................................................................... 3 1-2. The outward form and detail ..................................................................................
Oh’Care Bluetooth Bridge 1. The Product 1-1. The Overview Oh'Care Bridge is a communication device that transmits and receives information on the measurement results of the diagnostic equipment. Oh'Care Bridge communicate wirelessly or the wired communication method by the Bluetooth communication method. It is a purpose to make it possible to connect to a device through D-Sub 9 Pin, Stereo Jack or the like and wirelessly connect a wired communication device.
Oh’Care Bluetooth Bridge Dip Switch Micro USB Tact Switch Figure 2 The Oh’ Care Bridge bottom side Figure 3 The Oh’ Care Bridge Upper side 4
Oh’Care Bluetooth Bridge Figure 4. The Oh’ Care Bridge Back side D-Sub 9pin Figure 5.
Oh’Care Bluetooth Bridge - 2.5 ф Stereo Jack: Stereo Jack type product. Serial communication connection connector. - Dip Switch: The Dip switch is for communication baud rate setting. - Micro USB: Power supply via PC or adapter and USB communication connector - Tact Switch: BLE is a pairing switch. - D-Sub 9pin connector: Power supply through equipment and D-Sub 9 Pin type equipment. It is a connector using RS-232 communication standard.
Oh’Care Bluetooth Bridge 2. The Product specification - Manufacturer: OSANG Healthcare Co., Ltd - Model: OCB-1000 - Product Name: Oh’Care Bridge - In Power: DC 5V, 30mA - Size: (H)75mm X (W)35mm X(D) 17mm - S/N: OCB-1704270001 - S/W Version: Oh’Care Bridge SW V1.0 - H/W Version: Oh’Care Bridge HW V1.
Oh’Care Bluetooth Bridge 3. Products Connecting Figure 6. Oh’Care Bridge and 2.5 ф Stereo Jack type connected cable 1. 2.5 ф Stereo Jack connection - Oh’Care Bridge 2.5 ф Stereo Jack and OSANG Healthcare products can be connected 2.5 ф Stereo Jack type. Such as Figure 6. 2.5 ф Stereo Jack able to connect cable. - - However, the power supply for 2.5 ф Stereo Jack cable connection is supplied via Micro USB. 2.
Oh’Care Bluetooth Bridge Figure 7 . Figure 8. Oh'Care Bridge on D-Sub 9 Oh’ Care Bridge connected state.
Oh’Care Bluetooth Bridge 4. Product Communication Test Method ① Through BLE Master, search the currently driven BLE List as shown. ② Pair with necessary BLE after completion of search and proceed with connecting. ③ You can send BLE Master side Data using Slave Oh'Care Bridge connected to equipment or PC. - Figure. 9 shows a state in which pairing of BLE is performed and connection is made. Figure. 10 is information on devices transmitted from the Ocean healthcare device. Figure.
Oh’Care Bluetooth Bridge Figure 10. Figure 11.
Oh’Care Bluetooth Bridge 5. Handling Precautions 1) Please do a thorough technical examination before actually applying on site. We are not responsible for any problems that may arise due to the characteristics of the radio. 2) Do not disassemble, repair, remodel. 3) As it conforms to the RS - 232 communication standard and is a product, if you connect a line that does not conform to the standard to the product, it may damage the product, so please be careful.
Oh’Care Bluetooth Bridge CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. OCB-1000 is limited to work with OSANG Healthcare product documented in the manual only Problems may occur when connecting to other products than below 1. Blood Glucose Monitoring Systems ( GluNEO, GluNEO Lite, Finetest Auto Coding Premium, HealthPro, Glucolab Auto Coding, Oh’Care, Oh’Care Lite) 2.
