T AF D R USER GUIDE INF6502WB, INF6502LC INF7002WB, INF7002LC 009-1609-00
D R T AF
CONTENTS Declaration of Conformity....................................................................................................................................................3 Safety Considerations..........................................................................................................................................................4 安全資訊...................................................................................................................................................
Reset the registration parameters................................................................................................................................37 Resize the image..........................................................................................................................................................37 Define the default email address..................................................................................................................................
Declaration of Conformity Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, Oregon 97223-8368 USA Trademarks Apple, Mac and Facetime are trademarks or registered trademarks of Apple, Inc. Microsoft, Windows, PowerPoint, Excel and Word are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated.
SAFETY CONSIDERATIONS Please read and follow all safety instructions provided below and on the monitor before connecting the monitor to a power source. Failure to comply with safety instructions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by the equipment. Please save all safety instructions. This monitor is very heavy and should be moved and installed by at least two individuals.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the monitor. • Unplug the monitor if you are not going to use it for an extensive period of time. • Unplug the monitor if you need to clean it with the included microfiber cleaning cloth. The screen may be wiped with the cleaning cloth when the power is off. Never use alcohol, solvents or ammonia-based liquids on this monitor.
• 請勿將液體濺灑在顯示器上。濺落的液體可能會損壞顯示器。 • 警告：必須按照安裝指示將本顯示器牢固地固定在地板/牆面上。傾斜、搖晃或搖動機器可能會造成人身傷害或致死。 • 用於為此顯示器提供電力的電源插座應置於便於觸及的地方，以便在出現緊急情況時快速斷開連接。 • 請勿將點燃的蠟燭等明火火源放在顯示器上。 • 請使用附帶的電源線。將電源線連接到附帶防護安全（接地）接地端子的插座。建議使用具有電湧保護功能的電源板。 請勿超負荷使用壁式插座。 • 建議將 1 類顯示器接地。 • 請勿將顯示器安裝到易受機械振動影響的地方。 • 請勿將顯示器置於不平整的表面，這可能會造成嚴重的人身傷害並會損壞顯示器。要將顯示器安裝在支架上，請務必遵 守下列製造商指示。僅使用制 造商推薦的安裝硬體。 • 斷開電源線時，請握住插頭，切勿拉扯電線。 • 防止踩踏或擠壓電源線，尤其是電源插頭、插座以及在顯示幕上的出入點。 • 如果您長時間不打算使用顯示器，請拔掉顯示器插頭。 • 操作顯示器附帶的線纜後需要洗手。 T • 如果您需要使用附帶的超細纖維清潔布進行清潔，請拔掉顯示器插頭。電源關閉時，可使用清潔布擦拭螢幕。切勿在顯 示器上使
AF T WHAT’S INCLUDED D R 1920 x 1080 monitor USB cable Remote control (batteries not included) VGA cable Power cord (varies per country) Warranty Quick Start Guide Documentation LightCast key (INF6502LC/INF7002LC only) For additional accessory options, such as stands, feet, carts and wall mounts, see the InFocus website (www.infocus.com/store) or your local dealer.
SETUP Mounting This product does not ship with mounting accessories. Only use commercially manufactured mounting accessories which meet this product's specifications and follow the manufacturer installation instructions. Only use properly rated wall and stand mounting hardware that meet this product’s specifications and follow the manufacturer installation instructions. The warranty does not cover any damage caused by use of improperly rated mounting hardware or from improper installation.
Connecting to Other Devices A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the back and side of the monitor. Available jacks include: HDMI In (4), PC In (1), Composite Video (1), Component RCA (1), RS232 (1), Audio In 3.5mm (1), Audio In RCA (1-R/L), Microphone In (1), USB-B for touch control (1), USB 2.0-A (4), and Audio Out RCA (1-R/L).
B RJ45 VIDEO HDMI4 HDMI3 HDMI2 HDMI1 PC IN COMPONENT For Lightcast use only. Connect to an Ethernet network. USB For Lightcast use only. Connect a wireless mouse, USB thumb drive or other USB device to this USB Type A 2.0 connector. USB For Lightcast use only. Connect a wireless mouse, USB thumb drive or other USB device to this USB Type A 2.0 connector. VIDEO Connect a composite video cable from the monitor to an external device (such as a VCR or DVD player).
Insert LightCast key (INF6502LC/INF7002LC only) If your monitor did not ship with a LightCast key and you would like to use the LightCast features, you can purchase a LightCast key (p/n INA-LCKEY1, INA-LCKEY2, or INA-LCKEY3 depending on your region) from InFocus (www. infocusstore.com) or your local dealer. 1) Insert LightCast key into an available USB A port on the back of monitor. Connecting AC Power 1) Connect one end of the AC power cord to the AC In jack on the back of the monitor.
USING THE REMOTE The remote uses two (2) AAA batteries (not included). Install the batteries by removing the cover from the remote’s back, aligning the + and – ends of the batteries, sliding them in place and replacing the cover. T To operate, point the remote at the monitor sensor at the bottom right-hand corner of the monitor. The range of optimum operation is about 26’ (8m) and within a horizontal and vertical angle of 30 degrees.
Remote buttons Power: Switches the power on or puts the monitor into Standby. POWER Home: Changes the active source back to the embedded PC. HOME Input: Toggles the Input Source menu on and off, which allows the user to change sources. INPUT Menu: Turns the OSD menu on and off. MENU Resize: Switches between screen modes. Modes vary based on the source. RESIZE PiP On/Off: Turns the PiP function on and off and changes the PiP configuration between two active PiP sources.
Freeze: When enabled, freezes the image which is currently displayed. Blank: Toggles between the source and a blank black screen. Dimming: Adjusts brightness level. USING THE KEYPAD The keypad, located on the side of the monitor, has the following buttons: T Power button: Switches the power on or puts the monitor into Standby. ^ ^ ^ button: Moves the highlight bar up when the OSD or Source menu is on. v button: Moves the highlight bar down when the OSD or Source menu is on.
FIRST TIME USE Depending on whether you have a LightCast key inserted into your monitor or not, your monitor will either display a LightCast Welcome screen, or it will display the whiteboard interface (Go to "Whiteboard" on page 20). If your monitor did not ship with a LightCast key and you would like to use the LightCast features, you can purchase a LightCast key (p/n INA-LCKEY1, INA-LCKEY2, or INA-LCKEY3 depending on your region) from InFocus (www. infocusstore.com) or your local dealer.
Enter your registration information and tap the arrow to move to the next screen. 4) Enter the Device Name and WiFi Connection information, and tap the arrow. A confirmation page displays. (The LAN information populates when a LAN connection is detected.) 5) Tap the arrow again and the Home page displays.
LIGHTCAST CASTING If your monitor did not ship with a LightCast key and you would like to use the LightCast features, you can purchase a LightCast key (p/n INA-LCKEY1, INA-LCKEY2, or INA-LCKEY3 depending on your region) from InFocus (www. infocusstore.com) or your local dealer. AF T LightCast App Launch the LightCast App on the monitor. 2) Follow the onscreen instructions.
AirPlay Using iOS on an iPad or iPhone AF T Airplay sends content over either a wired or wireless network. You must have an Apple device with embedded AirPlay in order to use this AirPlay feature on this monitor. In addition, your network must follow Airplay configuration guidelines as specified by Apple. 1) Open the Control Center on your device by swiping up from the bottom of your iPad or iPhone screen. 2) Tap the Airplay icon.
Miracast Using an Android tablet AF T MiraCast can make an adhoc network connector over Wifi, however you must have an Android or Windows device (Windows 8.1 or above) with embedded MiraCast in order to use the MiraCast feature on this monitor. In addition, your network must follow Miracast configuration guidelines as specified by the Wi-Fi Alliance (www.wi-fi.org). Launch the MiraCast App. 2) Navigate to WiFi Settings.
WHITEBOARD AF T Create a drawing object Tap a drawing object from the Tools submenu. 1) Select the color, size, and opacity desired. 2) Draw on the whiteboard canvas with your finger or the stylus. TIP: Keep other objects, including writing utensils, other fingers, and knuckles away from the drawing surface to draw your image cleanly. 3) Use Eraser, Select, Undo, and Redo to modify the drawing. See "Whiteboard Tools" on page 28 for more information.
Import an image Supported image types include JPEG, PNG, BMP, GIF, and TIFF. Tap More. 2) Tap Import. 3) Choose Internal to import an image that has been saved to the monitor or External Storage to import an image that is located on an external device, such as a USB thumb drive. D R AF T 1) 4) Navigate to the associated folder and tap the desired image.
T Tap Done. 6) 7) D R AF 5) While the object is highlighted, drag it to the desired location and re-size it as needed using the sizing handles. In addition, you can cut, copy, paste, and delete it using the features in the Select submenu. Tap Cancel when finished.
Modify whiteboard canvas objects Tap Select. 2) Tap and drag your finger or the stylus across the objects you would like to select. The objects are outlined. AF T 1) To copy the selected objects: tap Copy and tap Paste. While the objects are selected, drag them to the desired location. To cut the objects and place them on a different page of the whiteboard canvas: tap Cut. Then navigate to the desired page and tap More and Paste. While the objects are selected, drag them to the desired location.
Tap More. 2) Tap Save. 3) Type a file name in the Name text box. 4) Select the file type: AF 1) T Save the whiteboard canvas File Type Option Choose this file type if you want to... 6) 7) saves the whiteboard file for future editing. JPG creates an image file. Note: The image file cannot be saved on the monitor and cannot be re-opened by the monitor for later use. You will be prompted to save this file type on a USB thumb drive. PDF creates a printable document for others to view.
Save the whiteboard canvas to a USB thumb drive Tap More. 2) Tap USB. 3) Type a file name in the Name text box. 4) Select the file type: AF T 1) File Type Option Choose this file type if you want to... 6) saves the whiteboard file for future editing. JPG creates an image file. Note: The image file cannot be saved on the monitor and cannot be re-opened by the montior for later use. PDF creates a printable document for others to view.
Open a whiteboard file Tap More. 2) Tap Open. 3) If the whiteboard canvas contains objects, you will be prompted to save the existing canvas. Select Save to save the existing canvas or select Don't save to delete the existing canvas and open a new one. (Cancel returns the user to the current canvas.) 4) By default, the Open Files window displays Whiteboard files saved internally onto the Whiteboard Device.
Open a whiteboard file from a USB thumb drive Tap More. 2) Tap USB. 3) Tap Open. 4) If the whiteboard canvas contains objects, you will be prompted to save the existing canvas. Select Save to save the existing canvas or select Don't save to delete the existing canvas and open a new one. (Cancel returns the user to the current canvas.) 5) Navigate to the desired folder and tap the file you wish to open. 1) 2) D R Navigation AF T 1) Tap Next Tap Previous to add or go to the next page.
WHITEBOARD TOOLS Icon Tool Name Description Previous Tap to go to the previous page. Current tool Tap to use the current tool. Tap Eraser, and then tap and drag across the drawing object to erase the portion you touched. Color Wheel submenu Tap to access the color submenu. AF T Eraser Color wheel Tap to choose a color using a color ramp. The current selected color appears in the middle of the color wheel. Segmented Tap to choose a color from the segmented color wheel.
Line Tap to draw a line. Laser Tap to highlight something temporarily. The red laser mark disappears when a new mark is made. Laser marks cannot be saved. Select Tap Select. Tap and drag the selection box around the drawing objects which you want to move, copy or delete. Tap and drag the selected objects to move them. Tap Copy to copy or Delete to delete the selected drawing objects. Cancel removes the selection. TIP: Copied objects are laid directly on top of existing drawing objects.
Tap to copy the selected object(s). Paste Tap to paste the last copied or cut object(s) on the whiteboard canvas. USB Tap to save or open files from an external USB thumb drive. Setting Tap to access the Setting menu. Next Tap to go to the next page.
LIGHTCAST BROWSER AF T If your monitor did not ship with a LightCast key and you would like to use the LightCast Browser features, you can purchase a LightCast key (p/n INA-LCKEY1, INA-LCKEY2, or INA-LCKEY3 depending on your region) from InFocus (www.infocusstore.com) or your local dealer. Use the Browser to access the internet. Tool Name Description Home Tap to return to the Home page. D R Icon Back Tap to go back to the previous webpage. Forward Tap to go back to the next webpage.
LIGHTCAST SETTINGS If your monitor did not ship with a LightCast key and you would like to use the LightCast features, you can purchase a LightCast key (p/n INA-LCKEY1, INA-LCKEY2, or INA-LCKEY3 depending on your region) from InFocus (www. infocusstore.com) or your local dealer. Connect using a WiFi network AF T To see the entire Settings menu, tap and swipe the menu up and down. From the Network Settings section of the Settings menu, tap WiFi Settings. The WiFi submenu displays.
Set up Bluetooth From the Network Settings section of the Settings menu, tap Bluetooth Settings. The Bluetooth submenu displays. 2) Tap On to use a Bluetooth device. 3) If the list of available (or already paired) devices does not automatically display, tap the Refresh button. 4) Tap the desired device and follow the onscreen prompts to pair your device to this monitor. Change the monitor name 2) From the Device section of the Settings menu, tap Name. The Name window displays.
3) Tap OK. Software version From the Systems and Security section of the Settings menu, tap About LIghtCast to display the current software version. Update the monitor From the Systems and Security section of the Settings menu, tap Firmware Update. 2) Insert a USB thumb drive into the side of the monitor. 3) Tap Select to choose which file to use for the upgrade. 4) Once selected, press Update to begin the update process.
Reboot the monitor D R AF T From the Systems and Security section of the Settings menu, tap Reboot to reboot this monitor. The monitor reboots immediately.
T Reset the registration parameters D R Resize the image AF From the Systems and Security section of the Settings menu, tap Reset to register the monitor with new information. Tap Yes to initiate the registration process. From the Systems and Security section of the Settings menu, tap Resize to digitally zoom the Display window smaller or larger, up to 100%.
Define the default email address AF Request desktop site T From the Accounts section of the Settings menu, tap to update the default email address. Tap OK when done. D R To use a desktop formatted website, tap to select the Request Desktop site check box. Otherwise a mobile web site will be used.
Define the default browser home page D R AF T From the Browser Preferences section of the Settings menu, tap to update the default browser home page. Tap OK when done.
UPDATE A MONITOR WITHOUT LIGHTCAST KEY Tap More. 2) Tap Setting. 3) Tap Update. The Update dialog box displays. 4) Insert a USB thumb drive with the software update on it into an available USB slot or navigate to the network . 5) Follow the prompts to update the software, or tap OK, if the software is already up-to-date. 6) Tap the X in the upper-right corner to close the Settings window.
OSD (ON-SCREEN DISPLAY) MENU SYSTEM The OSD provides the user the ability to control the monitor display. To access the OSD, press the Menu button on the remote or the keypad located on the right-hand side of the monitor. Use the up and down arrows on the remote or keypad to scroll through the menu options and press OK to enter the highlighted menu. Use the up and down arrows and OK button to select the item you would like to adjust. Left and right arrow buttons are used to make adjustments.
Picture Menu PICTURE BRIGHTNESS CONTRAST SHARPNESS COLOR TEMPERATURE COLOR CONTROL PICTURE MODE PICTURE RESET < < Sel <> Adjust RED GREEN BLUE Enter NATIVE STANDARD NO Back 70 50 50 100 100 100 Quit T Brightness: changes the intensity of the image. Range: 0-100. (Default 70.) Contrast: controls the degree of difference between the lightest and darkest parts of the picture and changes the amount of black and white in the image. Range: 0-100. (Default 50.
Screen Menu SCREEN H POSITION V POSITION CLOCK CLOCK PHASE BLANK DIMMING ASPECT RATIO SCREEN RESET < < Sel <> Adjust 50 50 50 50 OFF 70 WIDE NO Enter Back Quit T H Position: adjusts the horizontal position of the image. Range: 0-100. (Default 50.) V Position: adjusts the vertical position of the image. Range: 0-100. (Default 50.) Clock: adjusts the width of the image (For VGA input only). Range: 0-100. (Default 50.
Audio menu AUDIO SPEAKER AUDIO SOURCE AUDIO RESET < < Sel <> Adjust INTERNAL MONDOPAD NO Enter Back Quit T Speaker: controls whether both the internal and external speakers (sound bar, etc.) or just external speakers are used. Options include: Internal (both internal and external speakers operate) and External (only external speakers operate). Default Internal. AF Audio Source: selects the audio input source. Options include: HDMI 1, HDMI 2, HDMI 3, HDMI 4, Lightcast, Audio 1, and Audio 2.
PIP menu PIP PIP MODE PIP INPUT PIP POSITION PIP SWAP PIP SIZE PIP AUDIO PIP RESET < < Sel <> Adjust NO VGA TOP-RIGHT NO SMALL MAIN NO Enter Back Quit T PIP Mode: enables or disables Picture-in-Picture mode. Options include: Yes and No. PiP Input: selects the source input for the PiP window. Options include: VGA, component, video, HDMI1, HDMI2, HDMI3, HDMI4, LightCast. AF PiP Position: moves the PiP window position. Options include: Top-right, Top-left, Bottom-right, Bottom-left.
Configuration 1 CONFIGURATION 1 LANGUAGE AUTO SOURCE USB HUB SWITCH CONFIGURATION RESET FACTORY RESET <> Adjust Language: switches the OSD menu language. Enter Back Quit T < < Sel ENGLISH NO AUTO NO NO AF Auto Source: When enabled, automatically searches for an active source. If no source is detected, the device will revert to the previously active source. If Auto Source is disabled, the device will stay on the last selected source regardless of whether an active source is detected or not.
Configuration 2 CONFIGURATION 2 OSD TURN OFF FREEZE OSD H POSITION OSD V POSITION OSD ROTATION MONITOR INFORMATION < < Sel <> Adjust OFF PORTRAIT Enter Back 10 50 50 Quit T OSD Turn Off: controls how many seconds the OSD menu remains on the screen Range: 5-120 (seconds). (Default: 10) Freeze: When enabled, freezes the image which is currently displayed. Options: On and Off (default). OSD H Position: adjusts the horizontal position of the OSD menu. Range: 0-100.
Advanced Option ADVANCED OPTION GAMMA SELECTION OVER SCAN IR CONTROL KEYPAD CONTROL DDC/CI ADVANCED OPTION RESET < < Sel <> Adjust MODE1 ON NORMAL LOCK ON NO Enter Back Quit T Gamma Selection: adjusts the gamma value of the image and optimizes image brightness and contrast. Options include: Mode 1, Mode 2, Mode 3. Over scan: removes noise around the edges of a video image. Options include: On and Off (default). AF IR Control: disables and enables the IR sensor on the monitor.
TROUBLESHOOTING SYMPTOM POSSIBLE SOLUTIONS No power • Verify the power cord is properly connected to the power outlet and to the monitor. • Verify the power switch is ON and that the Power button on the remote or keypad has been turned on (the front LED should be on). • Plug another electrical device to the power outlet to verify that the outlet is supplying the proper voltage. The monitor shuts down suddenly • The colors on the monitor do not look right The monitor may have overheated.
No sound • If using external speakers, verify that the speakers are connected properly and that the speaker power switch is turned on. • If internal speakers are the only speakers being used, verify that the Audio menu Speaker setting is set to Internal. • If using an external source, such as component, verify that an audio cable is correctly installed between the device and the monitor. • Using the remote, verify the volume is turned up enough and not muted.
LIMITED WARRANTY InFocus Limited Warranty For InFocus Branded Hardware Products Only AF T LIMITED WARRANTY. InFocus’s warranty obligations for the hardware products are limited to the terms set forth herein. InFocus warrants the InFocus-branded hardware products against defects in materials and workmanship under normal use for a period outlined in the Limited Warranty Periods section below from the date of retail purchase by the original end-user purchaser (“Warranty Period”).
• Maintain a proper and adequate environment, and use the InFocus hardware products in accordance with the instructions furnished. • Verify configurations, load most recent firmware, install software patches, run InFocus diagnostics and utilities, and implement temporary procedures or workarounds provided by InFocus while InFocus works on permanent solutions.
AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF INFOCUS CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THE EXPRESS WARRANTY AND TO THE REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY INFOCUS IN ITS SOLE DISCRETION. No InFocus reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
location, or the ASP may send the product to an InFocus repair service location for service, (ii) by sending you prepaid way bills (and if you no longer have the original packaging, InFocus may send you packaging material at your cost) to enable you to ship the product to an InFocus repair service location, or (iii) by sending you customer-installable new or refurbished replacement parts to enable you to conduct Customer Self Repair, or (iv) by exchanging the product for a new or refurbished replacement.
to protect and disable any security passwords. THE CONTENTS OF YOUR PRODUCT WILL BE DELETED AND THE STORAGE MEDIA REFORMATTED IN THE COURSE OF WARRANTY SERVICE. Your product or a replacement product will be returned to you as your product was configured when originally purchased, subject to applicable updates. InFocus may install system software updates as part of warranty service that will prevent the hardware from reverting to an earlier version of the system software.
安全注意事項 在將顯示器連接到電源之前，請仔細閱讀並遵守顯示器上提供的下述安全說明。如不遵守安全說明則可能導致火災、觸電或 人身傷害，並可能損壞或 損害對設備所提供的保護。 請妥善保存所有安全說明。 這種顯示器是非常沉重的，應由至少兩個人進行搬動和安裝。不要試圖自行搬動或安裝顯示器，否則可能造成傷害和/ 或損害。 • 搬動顯示器時，利用手柄和側板或底板始終牢固地把持住顯示器。不要把持頂板。 • 在搬動顯示器紙箱時，不要傾斜或倒置紙箱。始終將其保持在豎直方向。 • 在移動顯示器前，請斷開所有配件和電纜。 • 如果顯示器安裝在牆上，顯示器與牆壁之間的距離至少保持為 1.98 英寸（5釐米），以提供足夠的通風。 • 請參閱正確的開機和關機程式方面的指南。 • 遵循本手冊和顯示器上的所有警告和注意事項。 • 顯示器的安放位置遠離加熱和冷卻通風孔至少 4 英尺（1.
在將顯示器安裝到牆上時，必須使用 M8 (12 毫米) 規格的螺栓。此外，安裝介面應符合北美 UL1678 式應牢固到足以承受顯示器的重量。 • 請遵照以下說明，以確保顯示器使用壽命期間的圖像品質。不遵守這些說明可能會影響保修。 D R AF T • Page 56 標準。安裝方
JTouch 65”顯示器I/O port 介紹前/後面板 A TOUCH CONTROL USB C RS232 TOUCH CONTROL TOUCH RJ45 VIDEO HDMI4 HDMI3 HDMI2 HDMI1 PC IN IN 2 Audio OUT L R COMPONENT D R A AF B T IN 1 Audio CONTROL 將USB纜線從顯示器連接至外部電腦，以便使用觸控模組。 USB 直接存取USB磁碟機上的多媒體檔案。 USB INF6502WB/INF6502LC/INF7002WB/INF7002LC User Guide Page 57
B HDMI4 VIDEO HDMI3 VIDEO HDMI2 HDMI1 PC IN COMPONENT 接受來自外部裝置（例如VCR或DVD播放器）的VIDEO信號。 HDMI4 接收外部裝置的HDMI信號。 HDMI3 HDMI2 接收外部裝置的HDMI信號。 HDMI1 接收外部裝置的HDMI信號。 PC IN T 接收外部裝置的HDMI信號。 COMPONENT 接收來自外部裝置（例如DVD播放器,HDTV裝置或雷射光碟播放器）的色 差視訊(YPbpr)訊號。 RS232 C MIC 連接外部數據機。 連接至麥克風。 D R RS232 AF 接收來自外部裝置（例如電腦）的類比RGB訊號。 AUDIO IN1 接收來自外部裝置（例如iPod播放器）所發出的音頻訊號。 AUDIO IN2 IN 1 接收來自外部裝置（例如DVD播放器）所發出的音頻訊號。 Audio AUDIO OUT IN 2 連接到外接式立體聲喇叭。 Audio OUT L Page 58 R
開啟或關閉顯示器。 選取/確認屏幕顯示(OSD) 功能表中的選項。 在OSD 功能表中向上捲動瀏覽各個設定和選項。 ^ 在OSD 功能表中向下捲動瀏覽各個設定和選項。 在OSD 功能表中向左捲動瀏覽各個設定和選項。 在OSD 功能表中向右捲動瀏覽各個設定和選項。 AF ^ T ^ ^ D R 開啟或關閉OSD 功能表。 INF6502WB/INF6502LC/INF7002WB/INF7002LC User Guide Page 59
T AF D R Page 60
T AF D R INF6502WB/INF6502LC/INF7002WB/INF7002LC User Guide Page 61
T AF D R Page 62
