HARDWARE GUIDE JTOUCH INF6501c 009-1544-00
CONTENTS Declaration of Conformity....................................................................................................................................................3 Safety Considerations..........................................................................................................................................................4 What’s Included........................................................................................................................................
DECLARATION OF CONFORMITY Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, Oregon 97223-8368 USA Trademarks Apple, Mac and Facetime are trademarks or registered trademarks of Apple, Inc. Microsoft, Windows, PowerPoint, Excel and Word are trademarks or registered trademarks of Microsoft Corporation. Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated.
should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.
• Do not place the monitor in direct sunlight, humid, greasy or dusty places or in places where the monitor may come into contact with rain, smoke or steam. • The monitor should not be used with the power cord near water, for instance, near a bathtub, washbowl, kitchen sink or swimming pool, etc. • Do not use any components of the monitor, including the speakers, near water.
WHAT’S INCLUDED 1920 x 1080 monitor POWER HOME INPUT ON/OFF INPUT MENU RESIZE PIP POSITION SWAP AUDIO BRIGHTNESS CONTRAST OK BACK Warranty INFO i VOL UP MUTE VOL DOWN Remote control (batteries not included) Quick Start Guide Documentation USB cable VGA cable Power cord (varies per country) For additional accessory options, such as stands, feet, carts and wall mounts, see the InFocus website (www.infocus.com/store) or your local dealer.
SETUP Mounting This product does not ship with mounting accessories. Only use commercially manufactured mounting accessories which meet this product's specifications and follow the manufacturer installation instructions. • Only use properly rated wall and stand mounting hardware that meet this product’s specifications and follow the manufacturer installation instructions. The warranty does not cover any damage caused by use of improperly rated mounting hardware or from improper installation.
Connecting to Other Devices A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the back and side of the monitor. Available jacks include: USB 3.0 Type A (4), Power In, Power Out, LAN, USB Type 2.0, USB 3.0 Type B, Composite video (1), HDMI (4), VGA, Component, RS232 for serial control, Audio In 3.5mm, Audio RCA In L/R, Audio RCA Out L/R. USB 3.0 Type A Page 8 Connect a USB device to one of the USB Type A 3.0 connectors (e.g. a USB 3.
RS232 Audio IN 1 Audio IN 2 Audio OUT ON/OFF POWER IN POWER OUT LAN USB 2.0 Product: TouchScreen Displays 产品名称: 互动式电子白板显示器 Model/型号: INF6501c Regulatory Model/认证型号: INF6501c Part Number: INF6501c USB 3.0 Voltage /电源: 100-240VAC Current: 2.5A Frequency: 50/60Hz Manufacturer: InFocus Corporation Address: 13190 SW 68th Parkway Suite 200, Portland, OR 97223-8368 VIDEO Part No.
VGA Component Connect a VGA computer cable from the monitor to an external computer. Connect a component RCA video cable from the monitor to an external device (such as a DVD player, HDTV device, or Laser Disc player) (YPbPr) signals. Right panel (top to bottom) RS232 AUDIO IN1 AUDIO IN2 AUDIO OUT Page 10 Connect to an RS232 control device for remote control applications. Connect a 3.5mm audio cable to an external device (e.g., iPod player). Connect a RCA L/R audio cable to an external device (e.g.
Connecting AC Power 1) Connect one end of the AC power cord to the AC In jack on the back of the monitor. 2) Connect the other end of the AC power cord to an AC outlet. 3) Press the power switch. (The LED on the front of the monitor turns on.) NOTES: • Your monitor should only be operated from the power source indicated on the label. • Always unplug the AC power cord from the power outlet when you are not using your monitor for an extended period of time.
USING THE REMOTE The remote uses two (2) AAA batteries (not included). Install the batteries by removing the cover from the remote’s back, aligning the + and – ends of the batteries, sliding them in place and replacing the cover. To operate, point the remote at the monitor sensor at the bottom right-hand corner of the monitor. The range of optimum operation is about 26’ (8m) and within a horizontal and vertical angle of 30 degrees.
Remote buttons Power: Switches the power on or puts the monitor into Standby. POWER POWER HOME INPUT MENU Home: Changes the active source back to the embedded PC. HOME RESIZE ON/OFF INPUT POSITION Input: Toggles the Input Source menu on and off, which allows the user to change sources. Options include: HDMI1, HDMI2, PC, and VGA. INPUT PIP SWAP AUDIO Menu: Turns the OSD menu on and off. MENU Resize: Switches between screen modes. Modes vary based on the source.
USING THE KEYPAD The keypad, located on the front of the monitor, has the following buttons: Press to navigate to the left in the OSD menu, or to navigate to a different source when the Source inputs are displayed. Press to navigate to the right in the OSD menu, or to navigate to a different source when the Source inputs are displayed. Press to navigate to the down in the OSD menu. Press to navigate to the up in the OSD menu. Press to display or exit the OSD menu. Press to toggle between source inputs.
OSD (ON-SCREEN DISPLAY) MENU SYSTEM The OSD provides the user the ability to control the monitor display. To access the OSD, press the Menu button on the remote or the keypad located on the right-hand side of the monitor. Use the up and down arrows on the remote or keypad to scroll through the menu options and press OK to enter the highlighted menu. Use the up and down arrows and OK button to select the item you would like to adjust. Left and right arrow buttons are used to make adjustments.
Picture Menu Brightness: changes the intensity of the image. Range: 0-100. (Default 70.) Contrast: controls the degree of difference between the lightest and darkest parts of the picture and changes the amount of black and white in the image. Range: 0-100. (Default 50.) Sharpness: changes the clarity of the edges of a video image. Range: 0-100. (Default 50.) Color Temperature: changes the intensity of the colors. Options include: Native (default), User, 6500K, and 9300K.
Screen Menu H Position: adjusts the horizontal position of the image. Range: 0-100. (Default 50.) V Position: adjusts the vertical position of the image. Range: 0-100. (Default 50.) Clock: adjusts the width of the image (For VGA input only). Range: 0-100. (Default 50.) Clock Phase: adjusts the focus, clarity and stability of the image (For VGA input only). Range: 0-100. Aspect Ratio: adjusts the ratio of the image width to image height. Options: 4:3 and Wide. (Default Wide.
Audio menu Speaker: controls whether both the internal and external speakers (sound bar, etc.) or just external speakers are used. Options include: Internal (both internal and external speakers operate) and External (only external speakers operate). Default Internal. Audio Source: selects the audio input source. Options include: HDMI A, HDMI B, Lightcast, Audio 1, and Audio 2. Audio Reset: resets all Audio menu items to factory default settings. Options: Yes and No.
PIP menu PIP Size: changes the size of the PiP window used in the Corner-to-Corner configuration. Options include: Small (default), Middle and Large. PIP Audio: switches the audio source from the main source to the PiP source. Options include: Main (default) and Sub. PIP Reset: resets all PIP menu items to factory default settings. Options: Yes and No. The PiP feature allows the user to display two distinct sources simultaneously on the monitor.
Configuration 1 Language: switches the OSD menu language. Auto Source: When enabled, automatically searches for an active source. Options: Yes and No (default). Operation Mode: When Monitor is enabled, the monitor acts like a simple monitor and only displays external source devices. AIO (All-in-One) should only be enabled when the monitor is being upgraded to include a Mondopad embedded PC. Options: Monitor (default) and AIO.
Configuration 2 OSD Turn Off: controls how many seconds the OSD menu remains on the screen Range: 5-120 (seconds). (Default: 10) OSD H Position: adjusts the horizontal position of the OSD menu. Range: 0-100. (Default: 50) OSD V Position: adjusts the vertical position of the OSD menu. Range: 0-100. (Default: 50) Monitor Information: This read-only submenu displays the model name, serial number, firmware version and amount of time the monitor has been powered on (hours/minutes).
Advanced Option Gamma Selection: adjusts the gamma value of the image and optimizes image brightness and contrast. Options include: Mode 1, Mode 2, Mode 3. Over scan: removes noise around the edges of a video image. Options include: On and Off (default). IR Control: disables and enables the IR sensor on the monitor. Options include: Normal (default; IR is enabled) and Lock (IR is disabled). Keypad Control: disables and enables the keypad on the right-hand side of the monitor.
TROUBLESHOOTING SYMPTOM POSSIBLE SOLUTIONS No power • Verify the power cord is properly connected to the power outlet and to the monitor. • Verify the power switch is ON and that the Power button on the remote or keypad has been turned on (the front LED should be on). • Plug another electrical device to the power outlet to verify that the outlet is supplying the proper voltage.
No sound • If using external speakers, verify that the speakers are connected properly and that the speaker power switch is turned on. • If internal speakers are the only speakers being used, verify that the Audio menu Speaker setting is set to Internal. • If using an external source, such as component, verify that an audio cable is correctly installed between the device and the monitor. • Using the remote, verify the volume is turned up enough and not muted.
SPECIFICATIONS To read the latest product specifications, be sure to visit our support website at www.infocus.com/support, as specifications are subject to change. Size (viewable) 1428.5mm (H) x 803.5mm (V) Dimensions (without stand) 60.2" (W) x 36.4" (H) x 3.3" (D); 1529.18 mm (W) x 924.22 mm (H) x 84.7 mm (D) Weight (without stand) 110.23 lbs / ~50.
LIMITED WARRANTY InFocus Limited Warranty For InFocus Branded Hardware Products Only LIMITED WARRANTY. InFocus’s warranty obligations for the hardware products are limited to the terms set forth herein. InFocus warrants the InFocus-branded hardware products against defects in materials and workmanship under normal use for a period outlined in the Limited Warranty Periods section below from the date of retail purchase by the original end-user purchaser (“Warranty Period”).
• Maintain a proper and adequate environment, and use the InFocus hardware products in accordance with the instructions furnished. • Verify configurations, load most recent firmware, install software patches, run InFocus diagnostics and utilities, and implement temporary procedures or workarounds provided by InFocus while InFocus works on permanent solutions.
AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF INFOCUS CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THE EXPRESS WARRANTY AND TO THE REPAIR OR REPLACEMENT SERVICE AS DETERMINED BY INFOCUS IN ITS SOLE DISCRETION. No InFocus reseller, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
location, or the ASP may send the product to an InFocus repair service location for service, (ii) by sending you prepaid way bills (and if you no longer have the original packaging, InFocus may send you packaging material at your cost) to enable you to ship the product to an InFocus repair service location, or (iii) by sending you customer-installable new or refurbished replacement parts to enable you to conduct Customer Self Repair, or (iv) by exchanging the product for a new or refurbished replacement.
to protect and disable any security passwords. THE CONTENTS OF YOUR PRODUCT WILL BE DELETED AND THE STORAGE MEDIA REFORMATTED IN THE COURSE OF WARRANTY SERVICE. Your product or a replacement product will be returned to you as your product was configured when originally purchased, subject to applicable updates. InFocus may install system software updates as part of warranty service that will prevent the hardware from reverting to an earlier version of the system software.
