Quick Start Guide

ManualsBrandsInfiRay ManualsCamera & PhotoP Series Pocket Thermal Camera

第 1 页共 72 页

烟台艾睿光电科技有限公司

烟台经济技术开发区贵阳大街 11 号

中国，山东，烟台 264006

www.iraytek.com.cn

Pocket Thermal Camera

Quick Start Guide

IRay Technology Co., Ltd.

manual, including words, pictures, images, etc., belong to IRAY TECHNOLOGY CO., LTD.

(Hereinafter referred to as “THE COMPANY” or “IRAY TECHNOLOGY”). No part of the

manual, in whole or in parts, may be copied, photocopied, translated, or transmitted without

the prior written permission of IRAY TECHNOLOGY.

Any third party shall not modify, crack, decompile or delete the documents, systems, software and

programs contained in the thermal camera without the consent of the company before it is sold to

the end user, and shall not dismantle the terminal product or preinstall other equipment on the

thermal camera without authorization.

The Company authorizes end users to use the camera within the scope of authorization and in the

areas where the thermal camera has obtained patent rights. Anyone shall not dismantle, modify,

crack, decompile or make other changes to the thermal camera without authorization or through

any third party. The users should bear the relevant responsibilities of camera damage, abnormal

function, unstable operation caused by above behaviors without authorization. In case of any

damage caused by the above behaviors, the company reserves the right to pursue its legal

liability.

Cautions

Summary of content (6 pages)

PAGE 1
烟台艾睿光电科技有限公司烟台经济技术开发区贵阳大街 11 号中国，山东，烟台 264006 www.iraytek.com.cn Pocket Thermal Camera Quick Start Guide IRay Technology Co., Ltd. ©2021 IRay Technology Co.,Ltd. All rights reserved worldwide. All contents in this manual, including words, pictures, images, etc., belong to IRAY TECHNOLOGY CO., LTD. (Hereinafter referred to as “THE COMPANY” or “IRAY TECHNOLOGY”).
PAGE 2
烟台艾睿光电科技有限公司烟台经济技术开发区贵阳大街 11 号中国，山东，烟台 264006 www.iraytek.com.cn   External Power Operation: DC 5V. Do not exceed the maximum angle of 90° when rotating the lens to avoid damage to the camera. Please do not make the objects fall onto the camera or vibrate the camera violently, and keep the camera far away from magnetic applications. In order to avoid damage to lens or detector, do not aim the lens to the strong heat light sources, such as the sun.
PAGE 3
烟台艾睿光电科技有限公司烟台经济技术开发区贵阳大街 11 号中国，山东，烟台 264006 www.iraytek.com.cn 7. Digital camera 8. Infrared lens 9. LED lights 10. On/off button 11. Lanyard attachment point 2. Lens Rotation The lens module can be rotated at angles of 0°, 30°, 60° and 90°. 3. Main Interface The picture on the left shows the main interface, and the lower part is the main menu.
PAGE 4
烟台艾睿光电科技有限公司烟台经济技术开发区贵阳大街 11 号中国，山东，烟台 264006 www.iraytek.com.cn 4.2 Measuring Mode On the main interface, tap the icon button on the main menu bar to enter the secondary fan-shaped menu, which contains six icons, and four are displayed by default. The remaining icons can be displayed by sliding the secondary fan-shaped menu clockwise or counterclockwise. Six measurement modes can be set: center spot, highest temperature, lowest temperature, spot, line and region.
PAGE 5
烟台艾睿光电科技有限公司烟台经济技术开发区贵阳大街 11 号中国，山东，烟台 264006 www.iraytek.com.cn FCC Caution. § 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user.
PAGE 6
烟台艾睿光电科技有限公司烟台经济技术开发区贵阳大街 11 号中国，山东，烟台 264006 www.iraytek.com.cn Appendix: Emissivity of Common Materials Material Emissivity Human Skin 0.98 Printed Circuit Board 0.91 Cement Concrete 0.92 Ceramics 0.92 Rubber 0.95 Wood 0.90 Pitch 0.96 Brick 0.93 Sand 0.90 Soil 0.92 Cardboard 0.90 White Sticky Membrane Paper 0.93 Water 0.96 Snow 0.85 Marble 0.94 Polished Glass 0.94 AAO 0.55 Oxidized Iron 0.64 Oxidized Steel 0.79 Oxidized Stainless Steel 0.85 IRay Technology Co., Ltd.