BR-3502 User Manual
Safety Warning ! Based on limits specified by the Federal Communication Commission (FCC) on Radio Frequency (RF) emissions in a general population environment, continued exposure to radiation should be avoided within 0.5 meter in front of the radar. Radiation levels outside this region fall within regulations of 1 mW/cm2 and are not considered safety hazards. When setting up the antenna, special care should be taken to avoid situations where the antenna radiates towards individuals.
Operation The BR-3502 is powered on 120/240 VAC, 50-60 Hz using a conventionnal power cord for connection in standard power outlet. It is interfaced to a processing unit using a single four-wire cable equipped with military connectors. This cable is used to carry the radar doppler signal to the processing unit and the antenna transmission control. You should connect your radar cable from this connector to the appropriate radar input on your processing unit. The connector type is ITT Cannon MS3124E16-8P.
LIMITED WARRANTY AND LIMITATION OF LIABILITY LIMITED WARRANTY. Infinition Inc. products are warranted against defects in materials and workmanship for a limited period of time from the date Infinition Inc. ships the products to the customer as follows: interface hardware (one (1) year); cables, cable reels, radar antennas and acoustic sensors (ninety (90) days); and software medium (ninety (90) days). All software products sold by Infinition Inc.
