BR-1022 User Manual Rev.
! Important Safety Instructions 1. Carefully read all of the instructions provided and save them for later use. Heed all warnings and instructions marked on the BR-1022. 2. Do not place the BR-1022 on an unstable stand or surface as it may fall resulting in serious damage. 3. The BR-1022 must be operated from a 120 Volts AC 60Hz @ TBDA power source for the North America model, or from a 240 Volts AC 50Hz @ TBDA power source for the European model. Operating voltage is factory set. 4.
1. General The BR-1022 radar can be used to measure the radial velocity of any moving object located in the radar beam coverage. The output of the radar is an analog signal with a frequency and amplitude proportional to the radial velocity and distance of the moving object. 2. Microwave Safety Warning ! Based on limits specified by the Federal Communication Commission (FCC) on Radio Frequency (RF) emissions in a general population environment, continued exposure to radiation should be avoided within 4.
The radar head has an override transmitter control switch that can be used to activate the transmitter locally at the antenna. In addition, the radar has a transmitter power control switch to select between low or high output power. At the low setting, the transmitter output power is 0.1 Watt and at the high setting, the output is 2.0 Watts.
8. Antenna Connector Specification Connector type: ITT CANNON MS3124E16-8P Pin A B C D E F G H Description Not Connected Not Connected Not Connected Remote Make for Antenna Transmitter Control (+ 5 Vdc Output) Make Ground Doppler Signal + (5 Vpp max.) Doppler Signal - (5 Vpp max.) Ground The processor does the remote activation of the transmitter by short circuiting pins D and E of the connector. 9.
LIMITED WARRANTY. Infinition Inc. products are warranted against defects in materials and workmanship for a limited period of time from the date Infinition Inc. ships the products to the customer as follows: interface hardware (one (1) year); cables, cable reels, radar antennas and acoustic sensors (ninety (90) days); and software medium (ninety (90) days). All software products sold by Infinition Inc. are licensed to the customer under the terms of the product software license agreement.
