Instructions for use WASHING MACHINE Contents GB Installation, 2-3 GB English,1 F Français,37 SK Slovensky,73 IWC 5105 ES Español,13 NL Nederlands,49 CZ Česky,25 RO Română,61 Unpacking and levelling Connecting the electricity and water supplies The first wash cycle Technical data Description of the washing machine and starting a wash cycle, 4-5 Control panel Indicator lights Starting a wash cycle Wash cycles, 6 Table of wash cycles Personalisation, 7 Setting the temperature Setting the spin spe
Installation GB ! This instruction manual should be kept in a safe place for future reference. If the washing machine is sold, transferred or moved, make sure that the instruction manual remains with the machine so that the new owner is able to familiarise himself/herself with its operation and features.
! Do not use extension cords or multiple sockets. Connecting the drain hose 65 - 100 cm Connect the drain hose, without bending it, to a drainage duct or a wall drain located at a height between 65 and 100 cm from the floor; GB ! The cable should not be bent or compressed. ! The power supply cable must only be replaced by authorised technicians. Warning! The company shall not be held responsible in the event that these regulations are not respected.
Description of the washing machine and starting a wash cycle GB Control panel WASH CYCLE PROGRESS/ DELAY TIMER indicator lights FUNCTION ON/OFF button buttons with indicator lights TEMPERATURE Detergent dispenser drawer knob Detergent dispenser drawer: used to dispense detergents and washing additives (see “Detergents and laundry”). ON/OFF button: switches the washing machine on and off. WASH CYCLE knob: programmes the wash cycles. During the wash cycle, the knob does not move.
Indicator lights The indicator lights provide important information. This is what they can tell you: Delayed start If the DELAY TIMER function has been activated (see “Personalisation”), after the wash cycle has been started the indicator light corresponding to the selected delay period will begin to flash: Wash cycle phase indicator lights Once the desired wash cycle has been selected and has begun, the indicator lights switch on one by one to indicate which phase of the cycle is currently in progress.
Wash cycles Table of wash cycles Wash cycles GB Description of the wash cycle Daily Cotton with prewash: extremely soiled whites. Cotton: extremely soiled whites. Cotton (1-2): heavily soiled whites and resistant colours. Cotton (2): lightly soiled whites and delicate colours. Max. temp. (°C) Detergents Max. speed (rpm) Prewash Wash Bleach Fabric softener Max.
Personalisation Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). The temperature may be lowered, or even set to a cold wash . The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value set for each wash cycle. Setting the spin speed Turn the SPIN SPEED knob to set the spin speed for the selected wash cycle.
Detergents and laundry GB Detergent dispenser drawer Preparing the laundry Good washing results also depend on the correct dose of detergent: adding too much detergent will not necessarily result in a more efficient wash, and may in fact cause build up on the inside of your appliance and contribute to environmental pollution. • Divide the laundry according to: - the type of fabric/the symbol on the label - the colours: separate coloured garments from whites.
Precautions and tips ! This washing machine was designed and constructed in accordance with international safety regulations. The following information is provided for safety reasons and must therefore be read carefully. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance. General safety • This appliance was designed for domestic use only.
Care and maintenance GB Cutting off the water and electricity supplies • Turn off the water tap after every wash cycle. This will limit wear on the hydraulic system inside the washing machine and help to prevent leaks. • Unplug the washing machine when cleaning it and during all maintenance work. Cleaning the pump The washing machine is fitted with a self-cleaning pump which does not require any maintenance.
Troubleshooting Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), make sure that the problem cannot be not solved easily using the following list. GB Problem: Possible causes / Solutions: The washing machine does not switch on. • The appliance is not plugged into the socket fully, or is not making contact. • There is no power in the house. The wash cycle does not start. • • • • • The washing machine door is not closed properly.
Service Before calling for Assistance: • Check whether you can solve the problem alone (see “Troubleshooting”); • Restart the programme to check whether the problem has been solved; • If this is not the case, contact an authorised Technical Assistance Centre using the telephone number provided on the guarantee certificate. GB ! Always request the assistance of authorised technicians. Have the following information to hand: • the type of problem; • the appliance model (Mod.); • the serial number (S/N).
Manual de instrucciones LAVADORA Sumario ES Español ES Instalación, 14-15 Desembalaje y nivelación Conexiones hidráulicas y eléctricas Primer ciclo de lavado Datos técnicos Descripción de la lavadora y comienzo de un programa, 16-17 Panel de control Pilotos Poner en marcha un programa Programas, 18 Tabla de programas Personalizaciones, 19 IWC 5105 Seleccionar la temperatura Seleccionar el centrifugado Funciones Detergentes y ropa, 20 Contenedor de detergentes Ciclo de blanqueo Preparar la ropa Prend
Instalación ES ! Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, verifique que permanezca junto con la lavadora para informar al nuevo propietario sobre el funcionamiento y brindar las correspondientes advertencias. ! Lea atentamente las instrucciones: ellas contienen importante información sobre la instalación, el uso y la seguridad. Desembalaje y nivelación Desembalaje 1. Desembale la lavadora. 2.
Conexión del tubo de descarga 65 - 100 cm Conecte el tubo de descarga, sin plegarlo, a una tubería de descarga o a una descarga de pared colocadas a una altura del piso entre 65 y 100 cm; ! No utilice prolongaciones ni conexiones múltiples. ES ! El cable no debe estar plegado ni sufrir compresiones. ! El cable de alimentación debe ser sustituido sólo por técnicos autorizados. ¡Atención! La empresa fabricante declina toda responsabilidad en caso de que estas normas no sean respetadas.
Descripción de la lavadora y comienzo de un programa ES Panel de control Pilotos DE AVANCE DEL Botón con piloto CICLO/COMIENZO PUESTA RETRASADO EN MARCHA/ PAUSA Botón de ENCENDIDO/ APAGADO Botones con pilotos FUNCIÓN Mando de Piloto PUERTA TEMPERATURA Contenedor de detergentes Mando de PROGRAMAS BLOQUEADA Mando de CENTRIFUGADO Contenedor de detergentes: para cargar detergentes y aditivos (ver “Detergentes y ropa”).
Pilotos Los pilotos suministran información importante.
Programas Tabla de programas Programas ES Descripción del Programa Temp. max. (°C) Duración del Detergentes Carga máx. (Kg.) Velocidad ciclo máx. BlanSuaviEco NorEco (r.p.m.) Prelavado Lavado Normal queador zante Time mal Time Diario (programas para todos los días) 1 Prelavado Algodón: blancos sumamente sucios. 90° 1000 - 5 - 145 - 2 Algodón: blancos sumamente sucios. 90° 1000 - 5 - 125 - 2 Algodón (1-2): blancos y colores resistentes muy sucios.
Personalizaciones Seleccionar la temperatura ES Girando el mando de la TEMPERATURA se selecciona la temperatura de lavado (ver la Tabla de programas). La temperatura se puede disminuir hasta el lavado en frío ( ). La máquina impedirá automáticamente seleccionar una temperatura mayor que la máxima prevista para cada programa. Seleccionar el centrifugado Girando el mando de CENTRIFUGADO se selecciona la velocidad de centrifugado del programa seleccionado.
Detergentes y ropa ES Contenedor de detergentes Preparar la ropa El buen resultado del lavado depende también de la correcta dosificación del detergente: si se excede la cantidad, no se lava de manera más eficaz, sino que se contribuye a encostrar las partes internas de la lavadora y a contaminar el medio ambiente. • Subdivida la ropa según: - el tipo de tejido / el símbolo en la etiqueta. - los colores: separe las prendas de color y las blancas. • Vacíe los bolsillos y controle los botones.
Precauciones y consejos ! La lavadora fue proyectada y fabricada en conformidad ES con las normas internacionales de seguridad. Estas advertencias se suministran por razones de seguridad y deben ser leídas atentamente. Seguridad general • Este aparato ha sido fabricado para un uso de tipo doméstico exclusivamente.
Mantenimiento y cuidados ES Interrumpir el agua y la corriente eléctrica • Cierre el grifo de agua después de cada lavado. De este modo se limita el desgaste de la instalación hidráulica de la lavadora y se elimina el peligro de pérdidas. Limpiar la bomba La lavadora posee una bomba autolimpiante que no necesita mantenimiento. Pero puede suceder que objetos pequeños (monedas, botones) caigan en la precámara que protege la bomba, situada en la parte inferior de la misma.
Anomalías y soluciones Puede suceder que la lavadora no funcione. Antes de llamar al Servicio de Asistencia Técnica (ver “Asistencia”),controle que no se trate de un problema de fácil solución utilizando la siguiente lista. ES Anomalías: Posibles causas / Solución: La lavadora no se enciende. • El enchufe no está introducido en la toma de corriente, o no hace contacto. • En la casa no hay corriente. El ciclo de lavado no comienza. • • • • • La puerta no está correctamente cerrada.
Asistencia Antes de llamar al Servicio de Asistencia Técnica: • Verifique si la anomalía la puede resolver Ud. solo (ver “Anomalías y soluciones”); • Vuelva a poner en marcha el programa para controlar si el inconveniente fue resuelto; • Si no es así, llame al Servicio de Asistencia técnica autorizado, al número de teléfono indicado en el certificado de garantía. ES ! No recurra nunca a técnicos no autorizados. Comunique: • el tipo de anomalía; • el modelo de la máquina (Mod.
Návod k použití PRAČKA Obsah CZ Česky CZ Instalace, 26-27 Rozbalení a vyrovnání do vodorovné polohy Připojení k elektrické a k vodovodní síti První prací cyklus Technické údaje Popis pračky a zahájení pracího programu, 28-29 Ovládací panel Kontrolky Zahájení pracího programu Prací programy, 30 Tabulka pracích programů Uživatelská nastavení, 31 IWC 5105 Nastavení teploty Nastavení rychlosti odstřeďování Funkce Prací prostředky a prádlo, 32 Dávkovač pracích prostředků Cyklus bělení Příprava prádla
Instalace CZ ! Je důležité uschovat tento návod tak, abyste jej mohli kdykoli konzultovat. V případě prodeje, darování nebo přestěhování pračky se ujistěte, že zůstane uložen v blízkosti pračky, aby mohl posloužit novému majiteli při seznámení s její činností a s příslušnými upozorněními. ! Pozorně si přečtěte uvedené pokyny: obsahují důležité informace týkající se instalace, použití a bezpečnosti při práci. Rozbalení a vyrovnání do vodorovné polohy Rozbalení 1. Rozbalte pračku. 2.
Připojení vypouštěcí hadice 65 - 100 cm ! Nepoužívejte prodlužovací kabely a rozvodky. Připojte vypouštěcí hadici, aniž byste ji ohýbali, k odpadovému potrubí nebo k odpadu ve stěně, který se nachází od 65 do 100 cm nad zemí; CZ ! Kabel nesmí být ohnutý ani stlačený. ! Výměna kabelu musí být svěřena výhradně autorizovanému technickému personálu. Upozornění! Výrobce neponese žádnou odpovědnost za následky nerespektování uvedených předpisů.
Popis pračky a zahájení pracího programu CZ Ovládací panel Kontrolky PRŮBĚHU PRACÍHO CYKLU/ODLOŽENÉHO STARTU tlačítka s kontrolkami ZAPNUTÍ/VYPNUTÍ Otočný ovladač Dávkovač pracích prostředků TEPLOTY Otočný ovladač PROGRAMŮ Dávkovač pracích prostředků: slouží k dávkování pracích prostředků a přídavných prostředků (viz „Prací prostředky a prádlo“). Tlačítko ZAPNUTÍ/VYPNUTÍ: slouží k zapnutí a vypnutí pračky. Otočný ovladač PROGRAMŮ: pro nastavení pracích programů.
Kontrolky Kontrolky jsou zdrojem důležitých informací. Informují nás o následujících skutečnostech: Odložený start Když byla aktivována funkce „Odloženého startu“ (viz „Uživatelská nastavení“), po zahájení pracího programu začne blikat příslušná kontrolka zvoleného odložení: Kontrolka aktuální fáze pracího programu: Po zvolení a zahájení požadovaného pracího cyklu dojde k postupnému rozsvícení kontrolek informujících o jeho průběhu.
Prací programy Tabulka pracích programů Programy CZ Popis programu Programy pro kazdodenní praní BAVLNA + PØEDPRANÍ: mimoøádnì zneèištìné bílé prádlo. BAVLNA: mimoøádnì zneèištìné bílé prádlo. BAVLNA (1-2): silnì zneèištìné bílé a barevné prádlo z odolných tkanin. BAVLNA (2): silnì zneèištìné bílé a barevné choulostivé prádlo. Doba trvání Max. Prací prostøedky Max. náplò (kg) Max.
Uživatelská nastavení Nastavení teploty CZ Otáčením otočného ovladače TEPLOTY se nastavuje teplota praní (viz Tabulka programů). Teplota může být postupně snižována až po praní ve studené vodě ( ). Zařízení automaticky zabrání nastavení vyšší teploty, než je maximální teplota pro každý prací program. Nastavení odstřeďování Otáčením otočného ovladače ODSTŘEĎOVÁNÍ se nastavuje rychlost odstřeďování zvoleného pracího programu.
Prací prostředky a prádlo CZ Dávkovač pracích prostředků Příprava prádla ! Nepoužívejte prací prostředky určené pro ruční praní, • Roztřiďte prádlo podle: - druhu tkaniny / symbolu na visačce. - barvy: oddělte barevné prádlo od bílého. • Vyprázdněte kapsy a zkontrolujte knoflíky. • Nepřekračujte povolenou náplň, vztahující se na hmotnost suchého prádla: Odolné tkaniny: max. 5 kg Syntetické tkaniny: max. 2,5 kg Choulostivé tkaniny: max. 2 kg Vlna: max. 1 kg Hedvábí: max.
Opatření a rady ! Pračka byla navržena a vyrobena v souladu s platnými mezinárodními bezpečnostním předpisy. Tato upozornění jsou uváděna z bezpečnostních důvodů a je třeba si je pozorně přečíst. Spotřebitelé by měli kontaktovat příslušné místní úřady nebo svého prodejce ohledně informací týkajících se správné likvidace starého zařízení. Základní bezpečnostní pokyny • Toto zařízení bylo navrženo výhradně pro použití v domácnosti.
Údržba a péče CZ Uzavření přívodu vody a vypnutí elektrického napájení • Po každém praní uzavřete přívod vody. Tímto způsobem dochází k omezení opotřebení pračky a ke snížení nebezpečí úniku vody. • Před zahájením čištění pračky a během operací údržby vytáhněte zástrčku napájecího kabelu z elektrické zásuvky. Čištění pračky Čištění čerpadla Součástí pračky je samočisticí čerpadlo, které nevyžaduje údržbu.
Poruchy a způsob jejich odstranění Může se stát, že pračka nebude fungovat. Dříve, než zatelefonujete na Servisní službu (viz „Servisní služba“), zkontrolujte, zda se nejedná o problém, který lze snadno vyřešit s pomocí následujícího seznamu. Poruchy: Možné příčiny / Způsob jejich odstranění: Pračku nelze zapnout. • Zástrčka není zasunuta v zásuvce nebo není zasunuta natolik, aby došlo ke spojení kontaktů. • V celém domě je vypnutý proud. Nedochází k zahájení pracího cyklu.
Servisní služba Před přivoláním Servisní služby: • Zkontrolujte, zda nejste schopni poruchu odstranit sami (viz „Poruchy a způsob jejich odstranění“); • Opětovně uveďte do chodu prací program, abyste ověřili, zda byla porucha odstraněna; • V opačném případě se obraťte na Centrum servisní služby na telefonním čísle uvedeném na záručním listu. CZ ! Nikdy se neobracejte s žádostí o pomoc na techniky, kteří nejsou k výkonu této činnosti oprávněni.
Mode d’emploi LAVE-LINGE Sommaire FR Français FR Installation, 38-39 Déballage et mise à niveau Raccordements eau et électricité Premier cycle de lavage Caractéristiques techniques Description du lave-linge et démarrage d’un programme, 40-41 Bandeau de commandes Voyants Démarrage d’un programme Programmes, 42 Tableau des programmes Personnalisations, 43 IWC 5105 Sélection de la température Sélection de l’essorage Fonctions Produits lessiviels et linge, 44 Tiroir à produits lessiviels Cycle blanchiss
Installation FR ! Conserver ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, veiller à ce qu’il suive toujours le lave-linge pour que son nouveau propriétaire soit informé sur son mode de fonctionnement et puisse profiter des conseils correspondants. ! Lire attentivement les instructions: elles fournissent des conseils importants sur l’installation, l’utilisation et la sécurité de l’appareil. Déballage et mise à niveau Déballage 1.
Raccordement du tuyau de vidange 65 - 100 cm Raccorder le tuyau d’évacuation, sans le plier, à un conduit d’évacuation ou à une évacuation murale placés à une distance du sol comprise entre 65 et 100 cm; ! N’utiliser ni rallonges ni prises multiples. FR ! Le câble ne doit être ni plié ni trop écrasé. ! Le câble d’alimentation ne doit être remplacé que par des techniciens agréés. Attention! Nous déclinons toute responsabilité en cas de non-respect des normes énumérées ci-dessus.
Description du lave-linge et démarrage d’un programme FR Bandeau de commandes Voyants DÉROULEMENT CYCLE/DÉPART DIFFÉRÉ Touche avec voyant Touche MARCHE/ ARRÊT FONCTION Voyant Bouton HUBLOT VERROUILLÉ TEMPÉRATURE Tiroir à produits lessiviels MARCHE/ PAUSE Touches avec voyants Bouton PROGRAMMES Bouton ESSORAGE Tiroir à produits lessiviels: pour charger les produits lessiviels et les additifs (voir “Produits lessiviels et linge”).
Voyants Lavage Les voyants fournissent des informations importantes. Voilà ce qu’ils signalent: Rinçage Départ différé Si la fonction “Départ différé” a été activée (voir “Personnalisations”), le voyant correspondant au temps sélectionné se mettra à clignoter, après avoir lancé le programme: Vidange Au fur et à mesure que le temps passe, le temps restant est affiché avec clignotement du voyant correspondant. Quand le retard sélectionné touche à sa fin le programme sélectionné démarre.
Programmes Tableau des programmes Programmes FR 1 2 2 2 Description du Programme Programmes pour tous les jours (Daily) Coton avec Prélavage: blancs extrêmement sales. Coton: blancs extrêmement sales. Coton (1-2): blancs et couleurs résistantes très sales. Coton (2): blancs et couleurs délicates très sales. Temp. maxi.
Personnalisations Sélection de la température Tourner le bouton TEMPÉRATURE pour sélectionner la température de lavage (voir Tableau des programmes). La température peut être abaissée jusqu’au lavage à froid ( ). La machine interdira automatiquement toute sélection d’une température supérieure à la température maximale prévue pour chaque programme. Sélection de l’essorage Tourner le bouton ESSORAGE pour sélectionner la vitesse d’essorage du programme sélectionné.
Produits lessiviels et linge FR Tiroir à produits lessiviels Triage du linge Un bon résultat de lavage dépend aussi d’un bon dosage de produit lessiviel: un excès de lessive ne lave pas mieux, il incruste l’intérieur du lave-linge et pollue l’environnement. • Trier correctement le linge d’après: - le type de textile / le symbole sur l’étiquette. - les couleurs: séparer le linge coloré du blanc. • Vider les poches et contrôler les boutons.
Précautions et conseils ! Ce lave-linge a été conçu et fabriqué conformément aux nor- FR mes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attentivement. Sécurité générale • Cet appareil est conçu pour un usage domestique.
Entretien et soin FR Coupure de l’arrivée d’eau et du courant Nettoyage de la pompe • Fermer le robinet de l’eau après chaque lavage. Cela réduit l’usure de l’installation hydraulique du lave-linge et évite tout danger de fuites. Le lave-linge est équipé d’une pompe autonettoyante qui n’exige aucune opération d’entretien. Il peut toutefois arriver que de menus objets (pièces de monnaie, boutons) tombent dans la préchambre qui protège la pompe, placée en bas de cette dernière.
Anomalies et remèdes Il peut arriver que le lave-linge ne fonctionne pas bien. Avant d’appeler le Service de dépannage (voir “Assistance”), contrôler s’il ne s’agit pas par hasard d’un problème facile à résoudre à l’aide de la liste suivante. Anomalies: Causes / Solutions possibles: Le lave-linge ne s’allume pas. • La fiche n’est pas branchée dans la prise de courant ou mal branchée. • Il y a une panne de courant. Le cycle de lavage ne démarre pas. • • • • • Le hublot n’est pas bien fermé.
Assistance Avant d’appeler le service après-vente: • Vérifier si on ne peut pas résoudre l’anomalie par ses propres moyens (voir “Anomalies et Remèdes”); • Remettre le programme en marche pour contrôler si l’inconvénient a disparu; • Autrement, contacter le Centre d’Assistance technique agréé au numéro de téléphone indiqué sur le certificat de garantie. FR ! Ne jamais s’adresser à des techniciens non agréés. Communiquer: • le type de panne; • le modèle de l’appareil (Mod.); • son numéro de série (S/N).
Gebruiksaanwijzing WASAUTOMAAT Inhoud NL Nederlands NL Installatie, 50-51 Uitpakken en waterpas zetten Hydraulische en elektrische aansluitingen Eerste wascyclus Technische gegevens Beschrijving van de wasautomaat en starten van een programma, 52-53 Bedieningspaneel Controlelampjes Een programma starten Programma’s, 54 Programmatabel Persoonlijke instellingen, 55 IWC 5105 Instellen van de temperatuur Instellen van de centrifuge Functies Wasmiddelen en wasgoed, 56 Wasmiddelbakje Voorbereiden van het
Installatie NL ! Het is belangrijk deze handleiding te bewaren voor latere raadpleging. In het geval u het apparaat verkoopt, of u verhuist, moet het boekje bij de wasautomaat blijven zodat de nieuwe gebruiker de functies en betreffende raadgevingen kan doornemen. Een correcte nivellering geeft de machine stabiliteit en voorkomt trillingen, lawaai en het zich verplaatsen van de automaat tijdens de werking.
Aansluiting van de afvoerbuis 65 - 100 cm Verbind de buis, zonder hem te buigen, aan een afvoerleiding of aan een afvoer in de muur tussen de 65 en 100 cm van de grond ! Gebruik geen verlengsnoeren of dubbelstekkers. NL ! Het snoer mag niet gebogen of samengedrukt worden. ! De voedingskabel mag alleen door een bevoegde installateur worden vervangen. Belangrijk! De fabrikant kan niet aansprakelijk worden gesteld wanneer deze normen niet worden nageleefd.
Beschrijving van de wasautomaat en starten van een programma NL Bedieningspaneel Controlelampjes VOORTGANG AAN/UIT toets TEMPERATUUR KNOP Wasmiddelbakje Toets met CYCLUS/UITGESTELDE START controlelampje START/ PAUZE Toetsen met controlelampjes FUNCTIE PROGRAMMAKNOP Controlelampje DEUR GEBLOKKEERD CENTRIFUGEKNOP Wasmiddelbakje: voor wasmiddelen en wasversterkers (zie “Wasmiddelen en wasgoed”). Controlelampje DEUR GEBLOKKEERD: om te zien of de deur kan worden geopend (zie pagina hiernaast).
Controlelampjes De controlelampjes geven belangrijke informatie.
Programma’s Programmatabel Programma’s NL Beschrijving van het Programma Maximale Maximaal Wasmiddel Duur cyclus Maximale lading (kg) toerental Temp (toeren per Bleek- WasverEco Eco (°C) minuut) Voorwas Wassen middel zachter Normaal Time Normaal Time Dagelijkse was 1 Katoen met voorwas: Zeer vuile witte was. 90° 1000 - 145 - 2 Katoen intensief wit: Zeer vuile witte was. 90° 1000 - 2 Katoen intensief wit (1-2): Zeer vuil wit en kleurecht bont wasgoed.
Persoonlijke instellingen Instellen van de temperatuur NL Door aan de TEMPERATUURKNOP te draaien kunt u de wastemperatuur instellen (zie Programmatabel). De temperatuur kan verlaagd worden tot aan koud wassen ( ). De machine voorkomt dat u een temperatuur instelt die hoger is dan het maximum voorzien voor dat programma. Instellen van de centrifuge Door aan de CENTRIFUGEKNOP te draaien stelt u de snelheid van de centrifuge van het gekozen programma in.
Wasmiddelen en wasgoed NL Wasmiddelbakje Voorbereiden van het wasgoed Een goed wasresultaat hangt ook af van de juiste dosis wasmiddel: te veel wasmiddel maakt het wassen niet beter. Het wasmiddel blijft aan de binnenzijde van de wasautomaat zitten en zorgt voor het vervuilen van het milieu. • • • ! Gebruik nooit wasmiddelen voor handwas aangezien die te veel schuim vormen.
Voorzorgsmaatregelen en advies ! De wasmachine is ontworpen en geproduceerd volgens de internationale veiligheidsnormen. Deze aanwijzingen zijn voor uw eigen veiligheid geschreven en moeten aandachtig worden doorgenomen. Consumenten moeten contact opnemen met de locale autoriteiten voor informatie over de juiste wijze van vernietiging van hun oude apparaat.
Onderhoud en verzorging NL Afsluiten van water en stroom Reinigen van de pomp • Sluit na iedere wasbeurt de kraan af. Hiermee beperkt u slijtage van de waterinstallatie van de wasmachine en voorkomt u lekkage. De wasautomaat is voorzien van een zelfreinigende pomp en hoeft dus niet te worden onderhouden. Het kan echter gebeuren dat kleine voorwerpen (muntjes, knopen) in het voorvakje dat de pomp beschermt en zich aan de onderkant ervan bevindt, terechtkomen.
Storingen en oplossingen Het kan gebeuren dat de wasautomaat niet werkt. Voor u contact opneemt met de Servicedienst (zie “Service”)moet u controleren of het niet een storing betreft die u zelf makkelijk kunt verhelpen met behulp van de volgende lijst. Storingen: Mogelijke oorzaken / Oplossing: De wasautomaat gaat niet aan. • De stekker zit niet in het stopcontact of niet ver genoeg om contact te maken. • Het hele huis zit zonder stroom. De wascyclus start niet. • • • • • De deur zit niet goed dicht.
Service NL Voordat u de Servicedienst inschakelt: • Controleer eerst of u het probleem zelf kunt oplossen (zie “Storingen en oplossingen”). • Start het programma opnieuw om te controleren of de storing is verholpen; • Als dit niet het geval is moet u contact opnemen met de erkende Technische Servicedienst via het telefoonnummer dat op het garantiebewijs staat. ! Wendt u nooit tot een niet erkende installateur. Vermeld: • het type storing; • het model van de machine (Mod.
Instrucţiuni de folosire MAŞINĂ DE SPĂLAT RUFE Sumar RO Română RO Instalare, 62-63 Despachetare şi punere la nivel Racorduri hidraulice şi electrice Primul ciclu de spălare Date tehnice Descrierea maşinii de spălat şi activarea unui program, 64-65 Panoul de control Indicatoare luminoase Activarea unui program Programe, 66 Tabel de programe Personalizare, 67 IWC 5105 Reglarea temperaturii Reglarea centrifugării Funcţii Detergenţi şi rufe albe, 68 Compartimentul pentru detergenţi Ciclu de albire Pr
Instalare RO ! Este important să păstraţi acest manual pentru a-l O nivelare precisă conferă stabilitate maşinii şi evită vibraţii, zgomote şi deplasări pe timpul funcţionării. În cazul mochetelor sau a unui covor, reglaţi picioruşele astfel încât să menţineţi sub maşina de spălat un spaţiu suficient pentru ventilare. ! Citiţi cu atenţie instrucţiunile: veţi găsi informaţii impor- Racorduri hidraulice şi electrice putea consulta în orice moment.
Conectarea furtunului de golire 65 - 100 cm Conectaţi furtunul de golire - fără a-l îndoi - la canalizare sau la racordul de golire prevăzut pe perete, la o înălţime de 65 - 100 cm de sol; ! Nu folosiţi prelungitoare şi prize multiple. RO ! Cablul nu trebuie să fie îndoit sau comprimat. ! Cablul de alimentare trebuie să fie înlocuit doar de tehnicieni autorizaţi ai centrului de service ce apare scris pe certificatul de garantie emis de producator.
Descrierea maşinii de spălat şi activarea unui program RO Panoul de control Indicatoare DESFĂŞURARE CICLU/PORNIRE ÎNTÂRZIATĂ Tasta Taste cu led PORNIRE/OPRIRE Selector Selector PROGRAME TART/PAUZĂ FUNCŢII Indicator TEMPERATURĂ Sertarul detergenţilor Tastă cu led UŞĂ BLOCATĂ Selector CENTRIFUGARE Sertarul detergenţilor: pentru a introduce detergenţi sau aditivi (a se vedea “Detergenţi şi rufe albe”). Indicator UŞĂ BLOCATĂ: pentru a înţelege dacă uşa se poate deschide sau nu (a se vedea pag.
Indicatoare luminoase Spălare Ledurile furnizează informaţii importante. Iată ce indică: Clătire Pornire întârziată Dacă a fost activată funcţia “Pornire întârziată” (a se vedea “Personalizare”), după activarea programului, se va aprinde intermitent ledul corespunzător întârzieriiselectate: Golire Cu trecerea timpului, se va vizualiza întârzierea restantă, prin aprinderea intermitentă a ledului respectiv. După trecerea intervalului de întârziere programat, va începe programul.
Programe Tabel de programe Programe RO Descrierea Programului Programe zilnice PRESPALARE BUMBAC: Rufe albe foarte murdare. RUFE ALBE BUMBAC: Rufe albe foarte murdare. RUFE ALBE BUMBAC (1-2): Albe ºi colorate rezistente foarte murdare. RUFE ALBE BUMBAC (2): Albe ºi colorate delicate foarte murdare. Viteza Temp. max. max. (rotaþii pe (°C) minut) Sarcina Max.
Personalizare Reglarea temperaturii RO Rotind selectorul de TEMPERATURĂ se fixează temperatura de spălare (a se vedea Tabelul programelor). Temperatura poate fi redusă până la spălarea la rece ( ). Maşina va împiedica în mod automat de a alege o temperatură mai mare decât maxima admisă pentru fiecare program. Reglarea centrifugării Rotind selectorul de CENTRIFUGARE se stabileşte viteza de stoarcere pentru programul selectat.
Detergenţi şi rufe albe RO Compartimentul pentru detergenţi Pregătirea rufelor Un rezultat bun la spălare depinde şi de dozarea corectă a detergentului: excesul de detergent nu garantează o spălare mai eficientă, ci contribuie la deteriorarea părţilor interne ale maşinii de spălat şi la poluarea mediului înconjurător. • • • ! Nu introduceţi în maşină detergenţii pentru spălarea manuală deoarece formează prea multă spumă.
Precauţii şi sfaturi ! Maşina de spălat a fost proiectată şi construită conform normelor internaţionale de protecţie. Aceste avertizări sunt furnizate din motive de siguranţă şi trebuie să fie citite cu atenţie. Norme de protecţie şi siguranţă generale • Acest aparat a fost conceput exclusiv pentru utilizarea în locuinţe unifamiliale.
Întreţinere şi curăţare RO Întreruperea alimentării cu apă şi curent electric • Închideţi robinetul de apă după fiecare spălare. Se limitează astfel uzura instalaţiei hidraulice a maşinii de spălat şi se elimină pericolul scurgerilor. • Scoateţi stecherul din priza de curent atunci când curăţaţi maşina de spălat şi când se efectuează lucrări de întreţinere. Curăţarea maşinii de spălat Partea externă şi părţile din cauciuc pot fi curăţate cu o lavetă înmuiată în apă călduţă şi săpun.
Anomalii şi remedii Se poate întâmpla ca maşina de spălat să nu funcţioneze. Înainte de a apela serviciul de Service (a se vedea “Asistenţă”), verificaţi dacă nu este vorba de o problemă uşor de rezolvat: RO Anomalii: Cauze posibile / Rezolvare: Maşina de spălat nu porneşte. • Stecherul nu este introdus în priza de curent, sau nu face contact. • Aveţi o pană de curent la domiciliu. Ciclul de spălare nu porneşte. • • • • • Uşa nu este bine închisă. Tasta PORNIRE/OPRIRE nu a fost apăsată.
Asistenţă Înainte de a lua legătura cu Service-ul: • Verificaţi dacă puteţi rezolva singuri problema (a se vedea “Anomalii şi remedii”); • Porniţi din nou programul pentru a controla dacă inconvenientul a fost eliminat; • În caz negativ, luaţi legătura cu asistenţa tehnică autorizată la numărul telefonic indicat pe certificatul de garanţie. RO ! Nu apelaţi niciodată la persoane neautorizate. Comunicaţi: • tipul de anomalie; • modelul maşinii (Mod.); • numărul de serie (S/N).
Návod na použitie PRÁČKA Obsah SK Slovensky, SK Inštalácia, 74-75 Rozbalenie a vyrovnanie do vodorovnej polohy Pripojenie k elektrickej a k vodovodnej sieti Prvý prací cyklus Technické údaje Popis práčky a zahájenie pracieho programu, 76-77 Ovládací panel Kontrolky Zahájenie pracieho programu Pracie programy, 78 Tabuľka pracích programov Užívateľské nastavenia, 79 IWC 5105 Nastavenie teploty Nastavenie odstreďovania Funkcie Pracie prostriedky a prádlo,80 Dávkovač pracích prostriedkov Bieliaci cyk
Inštalácia SK ! Je veľmi dôležité uschovať tento návod kvôli prípadné- Dokonalé vyrovnanie do vodorovnej polohy zabezpečí stabilitu zariadenia a zamedzí vzniku vibrácií a hluku počas činnosti. V prípade inštalácie na podlahovú krytinu alebo na koberec, nastavte nožičky tak, aby pod práčkou zostal dostatočný voľný priestor na ventiláciu. ! Pozorne si prečítajte uvedené pokyny: obsahujú Pripojenie k elektrickej a k vodovodnej sieti mu ďalšiemu použitiu.
! Nepoužívajte predlžovacie káble a rozvodky. Pripojenie vypúšťacej hadice 65 - 100 cm Pripojte vypúšťaciu hadicu, bez toho aby ste ju ohli, k odpadovému potrubiu alebo k odpadu v stene, ktorý sa nachádza od 65 do 100 cm nad zemou; SK ! Kábel nesmie byť ohnutý alebo pritlačený. ! Výmena kábla musí byť zverená výhradne autorizovanému technickému personálu. Upozornenie! Výrobca neponesie žiadnu zodpovednosť za následky spôsobené nerešpektovaním týchto pokynov.
Popis práčky a zahájenie pracieho programu SK Ovládací panel Kontrolky POSTUPU PRACIEHO CYKLU/ ONESKORENÉHO ŠTARTU Tlačidlo ZAPNÚŤ/VYPNÚŤ TEPLOTY Otočný ovládač PROGRAMOV Dávkovač pracích prostriedkov: slúži na dávkovanie pracích prostriedkov a prídavných prostriedkov (viď „Pracie prostriedky a prádlo“). Tlačidlo ZAPNÚŤ/VYPNÚŤ: slúži na zapnutie a vypnutie práčky. Otočný ovládač PROGRAMOV: pre nastavenie pracích programov. Počas pracieho programu zostane v rovnakej polohe.
Kontrolky Kontrolký sú zdrojom dôležitých informácií. Informujú o nasledujúcich skutočnostiach: Oneskorený štart Keď bola aktivovaná funkcia „Oneskoreného štartu“ (viď „Užívateľské nastavenia“), po zahájení pracieho programu začne blikať príslušná kontrolka zvoleného oneskorenia: Kontrolky prebiehajúcej fázy Po zvolení a zahájení požadovaného pracieho cyklu dôjde k postupnému rozsvecovaniu kontroliek informujúcich o jeho postupe.
Pracie programy Tabuľka pracích programov Pracie programy SK Popis programu Max. Pracie prostriedky Max. rýchlost Teplota (otácky za Pred(°C) minútu) pranie Pranie Bielaci Avivaz Max. nápln (kg) Doba trvania cyklu Bezna Eco Time Bezna Eco Time Quotidiano 90° 90° 60° 40° 1000 1000 1000 1000 - 5 5 5 5 - 145 125 165 155 - 3 BAVLNA: Znacne špinavé biele a farebné prádlo z odolných tkanín.
Užívateľské nastavenia Nastavenie teploty SK Otáčaním otočného ovládača TEPLOTY sa nastavuje teplota prania (viď Tabuľka programov). Teplota môže byť postupne znižovaná až po pranie v studenej vode ( ). Zariadenie automaticky zabráni nastaveniu vyššej teploty ako je maximálna teplota pre každý prací program. Nastavenie odstreďovania Otáčaním otočného ovládača ODSTREĎOVANIA sa nastavuje rýchlosť odstreďovania zvoleného pracieho programu.
Pracie prostriedky a prádlo SK Dávkovač pracích prostriedkov Príprava prádla Dobrý výsledok prania závisí aj od správneho dávkovania pracieho prostriedku: použitie nadmerného množstva znižuje efektivitu prania a napomáha tvorbe vodného kameňa na vnútorných častiach práčky a zvyšuje znečistenie životného prostredia. • Roztrieďte prádlo podľa: - druhu tkaniny / symbolu na visačke. - farby: oddeľte farebné prádlo od bieleho. • Vyprázdnite vrecká a skontrolujte gombíky.
Opatrenia a rady ! Práčka bola navrhnutá a vyrobená v súlade s platný- mi medzinárodnými bezpečnostnými predpismi. Tieto upozornenia sú uvádzané z bezpečnostných dôvodov a je potrebné si ich pozorne prečítať. Spotrebitelia majú povinnosť kontaktovať ich lokálny úrad alebo maloobchod kvôli informáciám týkajúcich sa správnemu odovzdaniu a likvidácie ich starých spotrebičov. Základné bezpečnostné pokyny • Toto zariadenie bolo navrhnuté výhradne na použitie ako spotrebič.
Údržba a starostlivosť SK Uzavretie prívodu vody a vypnutie elektrického napájania • Po každom praní uzatvorte prívod vody. Týmto spôsobom sa znižuje opotrebenie rozvodu vody zariadenia a znížuje sa nebezpečenstvo úniku vody. • Pred zahájením čistenia práčky a počas údržby je potrebné vytiahnuť zástrčku prívodného kábla zo zásuvky. Čistenie čerpadla Súčasťou práčky je samočistiace čerpadlo, ktoré nevyžaduje údržbu.
Poruchy a spôsob ich odstránenia Môže sa stať, že práčka nebude fungovať. Skôr, ako zatelefonujete na Servisnú službu viď „Servisná služba“) skontrolujte, či sa nejedná o problém ľahko odstrániteľný pomocou nasledujúceho zoznamu. Poruchy: Možné príčiny / Spôsob ich odstránenia: Pračku nie je možné zapnúť. • Zástrčka nie je zasunutá v elektrickej zásuvke, alebo nie je zasunutá dostatočne, aby došlo k spojeniu kontaktov. • V celom dome je vypnutý prúd. Nedochádza k zahájeniu pracieho cyklu.
Servisná služba 195092972.00 05/2011 - Xerox Fabriano Pred obrátením sa na Servisnú službu: • Skontrolujte, či nie ste schopní poruchu odstrániť sami (viď „Poruchy a spôsob ich odstránenia“); • Opätovne uveďte do chodu prací program, s cieľom overiť, či bola porucha odstránená; • V opačnom prípade sa obráťte na Centrum servisnej služby, na telefónnom čísle uvedenom na záručnom liste. SK ! Nikdy sa neobracajte so žiadosťou o pomoc na technikov, ktorí nie sú na vykonávanie tejto činnosti oprávnení.