User's Manual

ManualsBrandsIndesit ManualsBuilt in appliancesDIO3T131FEUK Full Size Integrated Dishwasher - White

APPLIANCE

PRODUCT DESCRIPTION

1. Upper rack

2. Cutlery rack

3. Foldable aps

4. Upper rack height adjuster

5. Upper spray arm

6. Lower rack

7. Lower spray arm

8. Filter Assembly

9. Salt reservoir

10. Detergent and Rinse Aid dispensers

11. Rating plate

12. Control panel

1 2 3 4 5 6 7 8 9 10

11 12 13

1. ON-OFF / Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Display

7. Delay indicator light

DAILY REFERENCE

GUIDE

CONTROL PANEL

8. Multizone indicator light

9. Push & Go button

10. Delay button

11. Multizone button with indicator light

12. Tablet (Tab) button with indicator light

13. START/Pause button with indicator light

THANK YOU FOR BUYING A INDESIT PRODUCT.

In order to receive a more complete assistance, please

You can download the Safety Instructions and the

User Manual, by visiting our website docs.indesit.eu

and following the Instructions on the back of this

booklet.

0000 000 00000

Service:

Before using the appliance carefully read Safety Instructions.

Summary of content (8 pages)

PAGE 1
EN DAILY REFERENCE GUIDE THANK YOU FOR BUYING A INDESIT PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.indesit.com/register You can download the Safety Instructions and the User Manual, by visiting our website docs.indesit.eu and following the Instructions on the back of this booklet. Before using the appliance carefully read Safety Instructions. PRODUCT DESCRIPTION APPLIANCE 3 4 7 Service: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
PAGE 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack. FILLING THE SALT RESERVOIR The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components. • It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY. • It is important to set the water hardness.
PAGE 3
EN Program Auto Door Drying phase PROGRAMS TABLE Available options *) Duration of wash program (h:min)**) Water consumption (litres/cycle) Energy consumption (kWh/cycle) 1 Eco 50° 3:10 9.5 0.83 2 Auto Intensive 65° 2:00 - 3:10 14.0 - 17.0 1.50 - 1.85 3 Auto Mixed 55° 1:30 - 2:30 14.5 - 16.0 1.15 - 1.30 4 Glass 45° 1:40 11.5 1.20 5 Fast&Clean 28’ 45° - 0:28 9.0 0.50 6 Extra Hygiene 65° - 1:40 10.0 1.30 7 Extra 50° - - 1:00 11.0 1.
PAGE 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. PUSH & GO Push&Go button is an easily distinguishable button that allows you direct access to the Push&Go program, a wash and dry cycle that ensures great cleaning performance in a short time.
PAGE 5
EN LOADING THE RACKS CUTLERY RACK FOLDABLE FLAPS WITH ADJUSTABLE POSITION The third rack was designed to house the cutlery. Arrange the cutlery as shown in the figure. A separate arrangement of the cutlery makes collection easier after washing and improves washing and drying performance. Knives and other utensils with sharp edges must be positioned with the blades facing downwards. The side foldable flaps can be fold or unfold to optimize the arrangement of crockery inside the rack.
PAGE 6
DAILY USE 1. CHECK WATER CONNECTION Check that the dishwasher is connected to the water supply and that the tap is open. 2. SWITCH ON THE DISHWASHER Open the door and press the ON/OFF button. 3. LOAD THE RACKS (see LOADING THE RACKS). 4. FILLING THE DETERGENT DISPENSER 5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE Select the most appropriate program in accordance with the type of crockery and its soiling level (see PROGRAMS DESCRIPTION) by pressing the P button.
PAGE 7
EN CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. On occasions, food residue may become encrusted onto the spray arms and block the holes used to spray the water. It is therefore recommended that you check the arms from time to time and clean them with a small non-metallic brush.
PAGE 8
TROUBLESHOOTING In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet. The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance. PROBLEMS POSSIBLE CAUSES SOLUTIONS Salt indicator is lit Salt reservoir is empty.