Istruzioni per luso LAVASCIUGA Sommario I Italiano,1 GB English, 13 I Installazione, 2-3 Disimballo e livellamento, 2 Collegamenti idraulici ed elettrici, 2-3 Primo ciclo di lavaggio, 3 Dati tecnici, 3 Descrizione della Lavasciuga, 4-5 Pannello di controllo, 4 Spie, 5 Avvio e Programmi, 6 In breve: avviare un programma, 6 Tabella dei programmi, 6 Personalizzazioni, 7 AML 89 Impostare la temperatura, 7 Impostare lasciugatura, 7 Funzioni, 7 Detersivi e biancheria, 8 Cassetto dei detersivi, 8 Prep
Installazione I È importante conservare questo libretto per poterlo consultare in ogni momento. In caso di vendita, di cessione o di trasloco, assicurarsi che resti insieme alla Lavasciuga per informare il nuovo proprietario sul funzionamento e sui relativi avvertimenti. Un accurato livellamento dà stabilità alla macchina ed evita vibrazioni, rumori e spostamenti durante il funzionamento.
Collegamento del tubo di scarico I Il cavo non deve subire piegature o compressioni. Il cavo di alimentazione deve essere sostituito solo da tecnici autorizzati. Attenzione! Lazienda declina ogni responsabilità qualora queste norme non vengano rispettate. Dopo linstallazione, prima delluso, effettuare un ciclo di lavaggio con detersivo e senza biancheria impostando il programma a 90°C senza prelavaggio.
Descrizione della Lavasciuga I Pannello di controllo Tasti FUNZIONE Spie Leggìo Tasto ACCENSIONE/ SPEGNIMENTO Spia ACCENSIONE/ OBLÒ BLOCCATO Manopola Cassetto dei detersivi Tasto PROGRAMMI START/RESET Manopola Manopola ASCIUGATURA TEMPERATURA Cassetto dei detersivi per caricare detersivi e additivi (vedi pag. 8). Manopola TEMPERATURA per impostare la temperatura o il lavaggio a freddo (vedi pag. 7).
Spie Ritardo impostato: Se è stata attivata la funzione Delay Timer (vedi pag. 7), dopo avere avviato il programma, inizierà a lampeggiare la spia relativa al ritardo selezionato: Prelavaggio / Lavaggio Risciacquo Centrifuga Descrizione Asciugatura Nota: - durante la fase di scarico si illuminerà la spia relativa alla fase Centrifuga. Tasti funzione I TASTI FUNZIONE fungono anche da spie. Selezionando una funzione il relativo tasto si illuminerà.
Avvio e Programmi I In breve: avviare un programma 5. Impostare lasciugatura se necessario (vedi pag. 7). 6. Versare detersivo e additivi (vedi pag. 8). 7. Avviare il programma premendo il tasto START/RESET. Per annullare il ciclo impostato premere il tasto START/RESET per 2 secondi. 8. Al termine del programma la spia ACCENSIONE/ OBLÒ BLOCCATO lampeggerà indicando che loblò è apribile. Estrarre la biancheria e lasciare loblò socchiuso per far asciugare il cestello.
Personalizzazioni Impostare la temperatura I Ruotando la manopola TEMPERATURA si imposta la temperatura di lavaggio (vedi Tabella dei programmi a pag. 6). La temperatura si può ridurre sino al lavaggio a freddo ( ). Ruotando la manopola ASCIUGATURA si imposta il tipo di asciugatura desiderato. Sono previste due possibilità: A - In base al tempo: Da 40 a 150 minuti. Alla fine dellasciugatura viene effettuato un periodo di raffreddamento.
Detersivi e biancheria I Cassetto dei detersivi Capi particolari Il buon risultato del lavaggio dipende anche dal corretto dosaggio del detersivo: eccedendo non si lava in modo più efficace e si contribuisce a incrostare le parti interne della lavabiancheria e a inquinare lambiente. Tende: piegarle e sistemarle dentro una federa o un sacchetto a rete. Lavarle da sole senza superare il mezzo carico. Utilizzare il programma 10 che esclude in automatico la centrifuga.
Precauzioni e consigli Sicurezza generale Questo apparecchio è stato concepito esclusivamente per un uso di tipo domestico. Non toccare la macchina a piedi nudi o con le mani o i piedi bagnati o umidi. Non staccare la spina dalla presa della corrente tirando il cavo, bensì afferrando la spina. Non toccare lacqua di scarico, che può raggiungere temperature elevate. Non forzare in nessun caso loblò: potrebbe danneggiarsi il meccanismo di sicurezza che protegge da aperture accidentali.
Manutenzione e cura I Escludere acqua e corrente elettrica Pulire la pompa Chiudere il rubinetto dellacqua dopo ogni lavaggio. Si limita così lusura dellimpianto idraulico della Lavasciuga e si elimina il pericolo di perdite. La Lavasciuga è dotata di una pompa autopulente che non ha bisogno di manutenzione. Può però succedere che piccoli oggetti (monete, bottoni) cadano nella precamera che protegge la pompa, situata nella parte inferiore di essa.
Anomalie e rimedi Può accadere che la Lavasciuga non funzioni. Prima di telefonare allAssistenza (vedi pag. 12), controllare che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco. La Lavasciuga non carica acqua. Il tubo di alimentazione dellacqua non è collegato al rubinetto. Il tubo è piegato. Il rubinetto dellacqua non è aperto. In casa manca lacqua. Non cè sufficiente pressione. Il tasto START/RESET non è stato premuto.
Assistenza Prima di contattare lAssistenza: Verificare se lanomalia può essere risolta da soli (vedi pag. 11); Riavviare il programma per controllare se linconveniente è stato ovviato; In caso negativo, contattare il Numero Unico 199.199.199*; I Non ricorrere mai a tecnici non autorizzati. Comunicare: il tipo di anomalia; il modello della macchina (Mod.); il numero di serie (S/N); Queste informazioni si trovano sulla targhetta applicata nella parte posteriore della Lavasciuga.
Instructions for use WASHER-DRYER Contents GB English GB Installation, 14-15 Unpacking and levelling, 14 Electric and water connections, 14-15 The first wash cycle, 15 Technical details, 15 Washer-dryer description, 16-17 Control panel, 16 Leds, 17 Starting and Programmes, 18 Briefly: how to start a programme, 18 Programme table, 18 Personalisations, 19 AML 89 Setting the temperature, 19 Set the drying cycle, 19 Functions, 19 Detergents and laundry, 20 Detergent dispenser, 20 Preparing your laundry
Installation GB Keep this instruction manual in a safe place for future reference. Should the appliance be sold, transferred or moved, make sure the instruction manual accompanies the Washer-dryer to inform the new owner as to its operation and features. Levelling your appliance correctly will provide it with stability and avoid any vibrations, noise and shifting during operation.
Do not use extensions or multiple sockets. Connecting the drain hose GB The power supply cable must never be bent or dangerously compressed. The power supply cable must only be replaced by an authorised serviceman. Installation 65 - 100 cm Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor; Warning! The company denies all liability if and when these norms are not respected.
Washer-dryer description GB FUNCTION Control panel Buttons Leds START/STOP Button ON-OFF/DOOR LOCK l Programme key Led PROGRAMME Detergent dispenser Knob START/RESET Button DRYING TEMPERATURE Knob Knob Detergent dispenser: to add detergent and fabric softener (see page 20). TEMPERATURE knob: to set the temperature or the cold wash cycle (see page 19). Programme key: to consult a straightforward chart of the different programmes available: pull the grey tab outwards to open it.
Leds Delay set: If the Delay Timer function has been enabled (see page. 19), once you have started the programme, the LED corresponding to the delay set will begin to flash: Prewash / Wash Rinse Spin cycle Detergents Function buttons The FUNCTION BUTTONS also act like LEDS. When a function is selected, the corresponding button is illuminated. If the function selected is incompatible with the programme set, the button will flash and the function will not be enabled.
Starting and Programmes GB Briefly: starting a programme 6. Add the detergent and any fabric softener (see page 20). 7. Start he programme by pressing the START/RESET button. To cancel it, keep the START/RESET button pressed for at least 2 seconds. 8. When the programme is finished, the ON-OFF/ DOOR LOCK Led will flash to indicate that the appliance door can be opened. Take out your laundry and leave the appliance door ajar to allow the drum to dry thoroughly.
Personalisations Setting the temperature GB Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 18). The temperature can be lowered, or even set to a cold wash ( ). Fabric type Load type B - Based on the damp level of the dry clothes: : slightly damp clothes, easy to iron. Iron Wardrobe : ry clothes to put away. Extra dry : very dry clothes, recommended for towelling and bathrobes.
Detergents and laundry GB Detergent dispenser Special items Good washing results also depend on the correct dose of detergent: adding too much detergent won't necessarily make for a more efficient wash, and may in fact cause build up on the interior of your appliance and even pollute the environment. Curtains: fold curtains and place them in a pillow case or mesh bag. Wash them separately without exceeding half the appliance load. Use programme 10 which excludes the spin cycle automatically.
Precautions and advice General safety Troubleshooting Service 21 Care The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment, requires that old household electrical appliances must not be Saving on detergent, water, energy and time To avoid wasting resources, the Washer-dryer should be used with a full load. A full load instead of two half loads allows you to save up to 50% on energy. The pre-wash cycle is only necessary on extremely soiled garments.
Care and maintenance GB Cutting off the water or electricity supply Turn off the water tap after every wash. This will limit the wear of your appliance's water system and also prevent leaks. Unplug your appliance when cleaning it and during all maintenance operations. Cleaning your appliance The exterior and rubber parts of your appliance can be cleaned with a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Troubleshooting Your Washer-dryer could fail to work. Before calling for Assistance (see page 24), make sure the problem can't easily be solved by consulting the following list. GB Possible causes/Solution: The Washer-dryer won't start. The appliance is not plugged into the socket, or not enough to make contact. There has been a power failure. The wash cycle won't start. The appliance door is not shut properly. button has not been pressed.
Service 195041446.04 02/2006 - Xerox Business Services Before calling for Assistance: Check whether you can solve the problem on your own (see page 23); Restart the programme to check whether the problem has been solved; If this is not the case, contact an authorised Technical Service Centre on the telephone number provided on the guarantee certificate. GB Always request the assistance of authorised servicemen. Service Notify the operator of: the type of problem; the appliance model (Mod.