System UHF/RF Modulation FM Mode Stereo S/N ratio >70dB Receiving sensitivity >10dBuvemf Distortion <1% Frequency response 60-15000HZ Power supply of transmitter | 5VDC / 120mA 420mAh —| |e Headphone charge time About 3 hours Headphone work time About 6 hours Thank you for choosing IND TV Headphone! Our greatest pursuit is your satisfaction.
Package Contents * Transmitter x1 JL * Headphone x1 * 5V Adapter x1 * Micro USB Charging * 3.
SETTING UP THE TRANSMITTER STEP 1: Power the Transmitter @Oo Plug the power supply cable into the Dock/Transmitter Plug the adapter into the wall socket or power strip. STEP 2: Test headphone and transmitter with your phone a Connect the Dock/Transmitter to your cellphone with the 3.5mm audio cable. Play the music on your cellphone. And then turn on the headphone by pressing power button 3 seconds. Listen to the headphone, check if there is music in it.
Connect Option 2: RCA Audio Out These are circular red and white Audio Out jacks, also called RCA jacks. Connect the included RCA adapter cable to the Audio Out or Output jacks on your TV. Then, connect the included AUX cable to the adapter and plug the other end of the AUX cable into the Audio In jack on the back of the transmitter. This method allows sound to be heard through the headphones and the TV. If you need sound to come only through the headphones, mute the TV.
Connect Option 4: Coaxial Audio Out (Cable Not Included) Find the Coaxial audio output jack on your TV or cable box, use coaxial cable(need to buy separately) to connect your TV or cable box with the transmitter. STEP 4: Using the IND Headphones 1. Make sure that the transmitter has been set up and is powered ON. 2. Press the power button for 3 seconds to turn on the headphones. The headphones should automatically pair to the transmitter. 3. Adjust the volume.
TROUBLESHOOTING a. | can’t hear any audio from my headphones. + Check that the transmitter and your headphones are both muted ON. + Check that all cables from the TV to the transmitter are connected properly. + Check that the transmitter is plugged in to the AC outlet. + Check that your headphones are fully charged » Check that the headphones are within 100 feet of the transmitter. «+ Check that the TV is not on mute. « Check that the headphones are turned all the way up.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.