User's Manual

•
Charge the InBodyBAND prior to initial use.
During the test, your hands MUST NOT come in contact with each other.
•
For accurate measurements, please enter the correct personal information
when you sync your InBodyBAND with the InBody App.
Please read the following before initial use.
© 2016 InBody Co., Ltd. All rights reserved. BM-ENG-J0-B-161031
InBody Co., Ltd.
InBody Bldg., 54, Nonhyeon-ro 2-gil, Gangnam-gu, Seoul 06313 Korea
Website: www.inbody.com
Customer Support: [e-mail]
Charging and Powering Up
InBodyBAND Modes
InBody Test:
Measure your percent body fat
Heart Rate measurement:
Measure your HR
Step Count:
Daily step count
Active minutes:
Duration of walking/running
Calories: Burned calories
from walking/running
Active Distance:
Distance traveled
Installing the InBody App
1. Search “InBody” in the Google Play Store
or the Apple App Store.
2. Download the InBody App.
3. Load the App and follow the on-screen
instructions to sync your InBodyBAND
with your phone.
Transferring data
Step count and sleep tracking data will be
automatically updated when the InBodyBAND
is synced with the App.
※ In the event the App fails to automatically update,
you can initiate a manual sync from the Steps Menu.
Creating an Account
1. Enter your mobile phone number after
starting the InBody App.
2. Enter your gender, height, age, and
password.
3. Finish registration by pressing Done.
1234567890
Setting Up the Device
InBody Test
1. Press InBody Test at the bottom of the
main screen.
2. Enter your current weight and start the
InBody Test.
3. After the test, results will be automatically
uploaded to the App.
※ In order to keep track of your InBody Test results,
the InBody Test must be initiated through the
InBody App.
※
Proper posture for InBody TEST & Heart Rate measurment.
Instructions
1. Please charge the InBodyBAND
using the charging dock.
2.
Once the InBodyBAND is securely
connected to the charging dock,
it will automatically turn on while charging.
※
Full charging requires approximately 1 hour
※
The device CANNOT operate while charging.
.
1.
→Select the ‘InBodyBAND2’
to bring up the setup screen.
Go to ‘Device’ in the setup menu
2. Press Confi rm after entering weight.
3.
InBodyBAND will vibrate to indicate
successful connection between the
InBody App and the device.