Band 1
Please note the important information below before reading this manual. The InBody Band is a medical device that allows the user measure their body composition, heart rate, activity level, and etc., by themselves. Warning *Failure to comply with safety warnings and regulations can cause serious injury or death. Caution *Failure to comply with safety cautions and regulations can cause injury or property damage. Note * Helpful information and useful tips that are handy while using the product. InBody Co.
Band I. Before Using the Product A. B. C. D. E. Product Components External Features Storage and Operation Conditions Charging the Battery Maintenance Information 4 4 5 5 5 II. Getting Started A. B. C. D. E. Downloading the App Powering On Connecting with the App Wearing InBody Band Screen 7 7 7 8 8 III. Getting to Know the Functions A. B. Data Transfer Functions 9 9 IV. Frequently Asked Questions (FAQ) A. Regarding the InBody 13 V. Others A. B. C.
Ⅰ. Before Using the Product A. Product Components The InBody Band contains of the following components. Make sure all of the following components are present. * Please inspect each component for damage, prior to installation. ❶ ❶ InBody Band ❷ Micro USB charging cable ❸ User’s Manual B.
C. Storage and Operation Conditions Transport and Storage Condition Temperature range -10 to 70 ºC (14 to 158 ºF) Relative humidity 10 to 80 % (no condensation) Atmospheric pressure range 50 to 106 kPa Operation Condition Temperature range -10 to 50 ºC (14 to 122 ºF) Relative humidity 30 to 75 % Atmospheric pressure range 70 to 106 kPa D.
* Avoid getting high-pressure water (water from the tap, waterfalls, waves, etc.) on the product. * Avoid dropping the product or applying excessive shock. The product’s water resistance and dust resistance may cause deterioration. * Be careful not to drop the product on the floor. The internal electronic parts may be critically damaged. * Do not apply excessive shock or force to the product. * Be careful not to soil the band. When stained with dirt, and etc., it may not clean completely.
II. Getting Started A. Downloading the App The InBody Band may be used together with our smartphone app. Install the app in one of the following ways. (Bluetooth communication is supported on Android OS 4.0 and above (on smartphones supporting BLE) and on iPhone 4S and above.) - Download the 'InBody' app from Google Play Store or App Store. - Call 080-578-0111 to install the app. B. Powering On Press and hold the button for 3 seconds to power on the product.
will start flashing when you press and hold the button for 3 seconds. 3) Press the button to set the hour, and then press and hold the button for 1 second to set the minute. 4) When you have finished setting the current time, press and hold the button for 3 seconds to finish the setup. 3. Bluetooth Information Caution * When establishing a connection, ensure that the two connecting devices are within a close range. Otherwise, malfunction, etc. may occur depending on the operation environment.
III. Getting to Know the Functions A. Data Transfer To transfer the data stored on the InBody Band to your smartphone, launch the InBody app and tap the Connect to InLab button at the bottom of the app screen. Note * For accurate detection, your steps are counted starting from the eighth step onwards and it may take a while for your step count to appear on the screen. * The walking distance measured may be different from the actual distance due to varied paces, standing jumps, reverse walking, and etc.
❷ The InBody Test will begin. ❸ When the test is completed, the results will be shown on screen. Results: Percent Body Fat Note * The InBody test function may not be used while the product is charging. 3) Test Posture The examinee must maintain proper posture to have accurate test results. * The test will proceed when there is good electrical contact. Note * Your arms must not touch the sides of your body. It is strongly recommended to wear shirts with sleeves.
standard is used. Note * You may also check your weight, body fat mass, muscle mass, and BMI data when you transfer the InBody test results to the InBody app. 3. Heart Rate 1) Test Information Caution * Please use the heart rate measurement function for measuring the human heart rate only. You may get unexpected heart rate measurement results depending on the environment. Under such cases, the heart rate measurement results are not valid. * Always take your heart rate measurement in a stable state.
* The heart rate measurement function may not be used while the product is charging. 3) Test Posture The examinee must maintain proper posture to have accurate test results. * The test will proceed when there is good electrical contact. 4) Measurement Data Heart Rate : This is the number of heart beats per minute. The heart rate of a healthy individual is about 70 per minute, but 50 to 100 is taken as a standard range to allow for the wide variation from one person to another. 4.
IV. Frequently Asked Questions The frequently asked questions and answers about the InBody Band are as follows. Please read this information before contacting the InBody Customer Support Center. A. About the Product Question * The product does not turn on. * The product is unable to establish or drops Bluetooth connections. * The battery is not charging. Answer * The battery might be discharged completely. Charge it adequately before use. * Press and hold the button for 3 seconds.
V. Others * The InBody Band is manufactured according to the quality management procedure of InBody. InBody complies with the ISO9001 and ISO13485 which are international quality management systems. * This equipment satisfies the IEC60601-1(EN60601-1), an international safety standard for electronic medical equipment. This equipment also satisfies the IEC60601-1-2(EN60601-1-2), an international standard for electromagnetic conformity. A. Safety Information Note Etc.
Disposal of old Electrical & Electronic Equipment (Application in the European Union and other European countries with separate collection system.) This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
“CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio freque ncy exposure limit.” B.