User's Manual

Confidential under NDA

For best user experience

InCoax recommends you

to enable JavaScript.

5 Controller Web Interface

The Controller can be managed via the management port using a web interface. Please refer to the InCoax

document “in:xtnd™ Control Software User Manual” for a more detailed description of the web interface and

how to set up the Controller. See reference {f}.

5.1 Accessing the Controller Web Interface

1. Connect a computer with an Ethernet cable to the Management port on the Controller,

marked MGT. See Figure 3. (InCoax recommends using the cable type CAT5e as a

minimum for best performance.)

2. Set a static IP for your computer connection, for example 192.168.144.100 (or any IP between

192.168.144.1 and 192.168.144.254 but not the same as the default IP address) and Subnet Mask

255.255.255.0.

3. Open your web browser and go to the URL https://192.168.144.20. The web page in Figure 4 will be

displayed. Input the following to log in:

a. Default Username: incoax

b. Default Password: incoax

Figure 3 — The front of the Controller.

Figure 4 — The login page.

5.2 User Levels and Permissions

There are two different user levels with different purposes and permissions:

 View Only: Demonstration and supervision. The View Only users can view some managed objects and

settings but cannot add or change anything.

⧫ Admin: Controller and Modem management. The Admin users can add and change managed objects and

settings. This is the standard user level.

Table 4 gives a detailed view of what the two user levels are allowed to do.

Kommenterad [CL4]: Byt bild