Integrated Hands-free Kit CS8132/CS8132T User Manual Environmental friendly
Contents Main keys on Bluetooth Stereo Headset ..................................................1 Main keys on FM Transmitter ..................................................................2 Main icons on LCD display .....................................................................3 1. How to Install the Integrated Hands-free Kit ................................4 2. Power on the Integrated Hands-free Kit ...................................12 3. Low-battery indication ................................
11. Connection between FM Transmitter with music players .........................31 12. Reset key .........................................................................................32 13. Package Contents ...............................................................................33 14. Operating temperature range for CS8132/CS8132T ................................35 15. Federal Communication Commission Interference Statement ...............
Thank you for buying the new Integrated Hands-free Kit CS8132/CS8132T. CS8132 is a great product to use in car. When it is properly linked with your Bluetooth mobile phone and your car audio system, it can utilize the speaker of the audio system to play music stored in the phone or to be a hands-free kit. Now, you can enjoy your favorable digital songs and hands-free conversation in a safe driving environment.
Main keys on Bluetooth Stereo Headset ( Hereinafter referred to as "Headset” ) 3 1 4 5 2 1 Volume up 2 6 Volume down 3 Power ON / OFF, Play / Pause, Answer / End the call 4 Forward / Call transfer / Redial 6 Reset key hole 5 1 Backward / Reject call / Voice dial CS8132 / CS8132T
Main keys on FM Transmitter 5 1 FM Transmitter 6 3 MEM P1 P2 P3 P4 P5 Memory 2 CH+ CHMEM 4 8 7 1 FM ON / OFF 2 Power socket 3 Answer/ End call, Music play/pause 4 FM Frequency down 5 FM Transmitter docking 6 FM Memory 7 FM Frequency up 8 Audio input socket 2 CS8132 / CS8132T
Main icons on LCD display 1 MEM P1 P2 P3 P4 P5 5 4 3 2 6 1 FM Frequency 2 FM Memory 3 Preset FM Channel P1-P5 4 Music playing 5 Conversation 6 Bluetooth 3 CS8132 / CS8132T
1. How to Install the Integrated Hands-free Kit 1.1 With air vent clip 1. Slide the air vent clip into the FM Transmitter ( Fig. 1 ) FM Transmitter Air vent clip Slide ( Fig.
2. Slide and clip the air vent clip to the air vent of car ( Fig. 2 ) FM Transmitter Air vent clip Air vent window ( Fig.
3. Connect the car charger to the FM Transmitter ( Fig. 3 ) Power socket Car charger Car charger ( Fig.
4. Plug the car charger into the cigarette lighter socket ( Fig. 4 ) MEM P1 P2 P3 P4 P5 Car charger Cigarette lighter socket ( Fig.
5. Slide and push the Headset on the FM Transmitter docking(Fig. 5) Slide and push MEM P1 P2 P3 P4 P5 * Installation is completed ( Fig.
1.2 With metal stand Likewise, the FM Transmitter can be conveniently placed on the top of the dash board by a metal stand. 1.
2.
2. Power on the Integrated Hands-free Kit The Integrated Hands-free Kit CS8132/CS8132T is composed of two major items: a Headset and a FM Transmitter. 2.1 Power on the FM Transmitter: Turn on the ignition of your car. When the FM Transmitter is connected with the cigarette lighter socket by the car charger, it is powered on. If no display is shown on LCD, press the key on FM Transmitter once to turn it on. 2.2 Charging the Headset: 1.
4. How to wear the Headset ( Fig.6-7-8 ) 4.1 How to install earhook on to the Headset . ( Fig.
4.2 How to wear the Headset . 1 2 ( Fig.
4.3 How to change side of the earhook ( Fig. 8 ) Please adjust the earpiece to fit into your ear comfortably, and make sure the microphone is pointing towards your mouth.
4.
5. How to take out the Headset from FM Transmitter docking(Fig.9) When your car stands still , you can pick up the Headset as way showing in below: MEM P1 P2 P3 P4 P5 ( Fig.
6.
7.Turning on / Turning off the Headset When the Headset is powered down, press and hold button till blue LED flashes that indicates the Headset is powered up. When the Headset is on, press and hold button, the LED will keep red for a while then off. The Headset is turned off. If there is no Bluetooth link for 30 minutes during charging, the Headset will power off automatically. If there is no Bluetooth link for 10 minutes in non-charge condition, the Headset will power off automatically. 8.
2. Follow the operating instructions of your Bluetooth mobile phone to start the pairing process. Typically, this has to be done by going to a setup or connect menu and then selecting the options to discover Bluetooth devices.It may take several seconds to establish a Bluetooth connection. Your phone's display should indicate that it has found the model name “CS8132”;and prompt you for a passkey or PIN. Enter a sequence of “0000”. 3. If the pairing is successful, the LED will flash blue every 2 seconds.
8.3 Ending calls While a call is in session, press button will end the call. 8.4 Last number redial While the Headset and Bluetooth mobile are in standby mode, press and hold the button for 2 seconds to redial the last dialed number. 8.5 Adjusting speaker volume While a call is in session, pressing and releasing / buttons will adjust the speaker volume. [Advance function] While the Headset is playing music, pressing / releasing / buttons will adjust the speaker volume. 8.
If the connection is failed, the Headset will beep and go back to standby mode. Before the Headset entering into voice dialing mode, make sure the voice dialing function of the phone is enabled. (ADVANCE FUNCTION) While the Headset is playing the music, continuously pressing the button will pause the music playing and a beep will be heard, indicating that the Headset is connecting with mobile phone for voice dialing function.
8.7 Transferring call To transfer a call from the Headset to mobile phone or from mobile phone to Headset, press button. 8.8 No network signal warning If the mobile phone can not locate the network signal (e.g. out of the reach), the alert tone will ring 3 times every minute. Not every mobile phone supports network signal alert feature. 8.
When Headset is on FM transmitter docking, “Connecting” will be displayed when Headset is attempting to make a connection. Connecting 9. Headset on FM Transmitter Docking 9.1 Establishing Bluetooth link 1. While the Headset is powered off, press and hold button for 4 seconds. The LED will flash red and blue alternatively, which indicates the Headset is in pairing mode. The pairing mode will last for 3 minutes.
2. Follow the operating instructions of your Bluetooth mobile phone to start the pairing process. Typically, this has to be done by going to a setup or connect menu and then selecting the options to discover Bluetooth devices.It may take several seconds to establish a Bluetooth connection. Your phone’s display should indicate that it has found the model name “CS8132/CS8132T”; and prompt you for a passkey or PIN. Enter a sequence of “0000”. 3.
9.2 Answering incoming calls When the Headset is on FM transmitter docking and there is an incoming call, the music playing will stop and a ring tone will be heard. The caller information will be displayed on the LCD of FM transmitter docking or “Ringing” when phone number is not available. 13146615794 or Ringing Press button on Headset or button on FM transmitter will answer the call where the voice of the caller from far end will be heard through the speaker system of the car.
9.3 Ending calls During conversation, press button on the FM transmitter docking or button on Headset to end the call. 9.4 Music playing When the Headset is on FM transmitter docking, Headset will transmit the signal from FM transmitter to car radio. You can play your music from your mobile phone on car audio. FM transmitter will display icon. press button on FM transmitter or button on Headset can play or pause the music.
10.1 Set up frequency of car radio and FM Transmitter(Fig.10-11) 1.Select a free channel manually on the car audio system and store it in a memory position ( Fig.10 ) 2. Select the same free channel on FM Transmitter position by pushing buttons and store it in a memory position.Then you can use your car audio system to listen to the music or phone calls from your mobile phone or music from other audio devices. MEM P1 P2 P3 P4 P5 ( Fig.11 ) 3.
10.2 FM tuning 1. Press key on the FM Transmitter to turn on / off the FM transmission. 2. When the FM transmission is turned on, the LCD will display the frequency last used and subsequently the status of the Headset. 3. Press / buttons will tune up or down the transmitter frequency. For fast scrolling, press & hold / buttons until the desired channel is reached. 4. Or press memory button repeatedly to select the channel with preset frequency. The icon and the selected preset channel no.
6. The main power of the FM Transmitter can be turned off by pressing and holding the key on the unit for about one second. In this case, no display is shown on LCD. It can then be powered on again by pressing the key or putting the Headset on the FM Transmitter. The main power will automatically be turned off if the FM Transmitter is (1) not in use with an external audio device (ie, no connection with any device by the audio input socket or the device stops playing) and (2) not in use with the Headset (i.
10.3 FM Memory setup FM transmitter has 5 channels with preset frequencies. User can overwrite the preset frequency by following instructions below. 1. Tune the FM transmitter to desired frequency 2. Press & hold button until & “P1-P5” icons are blinking 3. Press or button to go to the preset channel you want to overwrite 4. Press key to confirm the setting. FM 108.0 MHz MEM P1 11. Connection between FM Transmitter with music players 11.1 Plug the iPod, MP3, MP4 to audio input socket of FM transmitter 11.
11.4 FM transmitter is docking with the Headset connected to Bluetooth mobile phone and transmitting the music from music player. When there is phone call, the music will stop and a ring tone will be heard. You can answer the call (refer to operation from part 7 ). When the phone call is ended, the CS8132 will go back to music playing. Reminder: Please adjust the volume of car audio system to suit your needs as different sources may have different pre-set volume levels. 12.
13.
Description Status Headset earpiece Provided 4 Ear buds Provided A /C adaptor Optional USB cable Optional 33 CS8132 / CS8132T
o o 14. Operating temperature range for CS8132/CS8132T : -20 C to +60 C o o or -4 F to +140 F. 15. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.