User Manual

ManualsBrandsIn Tech Electronics ManualsElectronicsBluetooth pendant

c. If the pairing is successful, the LED will flash green, which indicates it is in

Standby Mode and ready to answer and receive mobile phone calls from it. If

pairing does not occur as expected, turn the Pendant and the mobile phone off.

Wait for 10 seconds and repeat the pairing process from the beginning.

2. Answering incoming calls / Rejecting incoming calls

a. When an incoming call is present ring tones of speaker will be heardfrom the

earpiece of the Pendant. Press button will answer the call. Press button

will reject the call.

，

b. If the Pendant is connected with your mobile phone and

another Bluetooth transmitter such as the Audio Adaptor simultaneously and you

are listening to the music using the earpiece, a ring tone will prompt you. Press

button will answer the call. Press button will reject the call and you

will continue listening to the music.

3. Ending calls

a. While a call is in session, press button will end the call.

b. If the Pendant is connected with your mobile phone and

another Bluetooth transmitter such as the Audio Adaptor simultaneously, press

button will end the call and you will continue listening to the music.

4. Last number redial

a. While the Pendant and Bluetooth mobile are in Standby Mode, press and hold

the button for 2 seconds to redial the last dialed number.

b. If the Pendant is connected with your mobile phone and

another Bluetooth transmitter such as the Audio Adaptor, press and hold the

button for 2 seconds to redial the last dialed number. Press button to

end the call as normal.

5. Adjusting speaker volume

a. While a call is in session, pressing and releasing VOL + / VOL - buttons will

adjust the speaker volume.

b. While the Pendant is playing music pressing / releasing

VOL+ / VOL - buttons will adjust the speaker volume.

6. Activating voice dialing

When the Pendant is in standby mode, press and hold the button for 2

seconds until a long beep is heard . The Pendant is connecting to your mobile

phone for voice dialing function . If the connection is successfully made, the

phone will ask for the name of the person you wish to call. The call will be

executed in a few seconds. If the connection is failed, the Pendant will beep

and go back to standby mode. Before the Pendant entering into voice dialing

mode , make sure the voice dialing function of the phone is enabled.

While the Pendant is playing the music, continuously pressing

the button will stop the music playing and a long beep will be heard , indicating

that the Pendant is connecting with mobile phone for voice dialing function . If the

connection is successfully made, the voice dialing can be executed according to the

mobile phone s menu operations . If the connection is failed, the Pendant will beep and

go back to music playing.

[Advance function]

(ADVANCE FUNCTION)

，

’

Remarks: Voice dialing function is not supported in Sony Ericsson K750i

PLAY

Index

．Charging and recharging the battery .................................................................1

Low-battery indication ......................................................................................2

Turning on / Turning off the Pendant and the Audio Adaptor ..................................2

...................................................................................3

. Stereo Pendant paired with Bluetooth mobile phone Guide [ A ] ........................4

1. Pairing ..........................................................................................4

2. Answering incoming calls / Rejecting incoming calls ................................5

3. Ending calls .......................................................................................5

4. Last number redial ............................................................................5

5. Adjusting speaker volume ..................................................................5

6. Activating voice dialing .................................................5

7. Transfer call .......................... .................................................................6

. Stereo Pendant paired with Stereo Audio Adaptor Guide [ B ] ........................6

1. Pairing ...................................................................................................6

2. Listening to music ..................................................................................6

. Stereo Pendant paired with USB Bluetooth Dongle Guide [ C ] ......................7

1. Pairing ...................................................................................................7

2. Listening to music ...................................................................................7

. Stereo Pendant paired with Bluetooth enabled PDA Guide [ D ] ....................8

1. Pairing ...................................................................................................8

2. Listening to music ...................................................................................8

. Stereo Pendant paired with Audio Adaptor and

Bluetooth mobile phone Guide [ A & B ] .............................................9

1. Pairing ...................................................................................................9

2. Listening to music ...................................................................................9

3. Monitoring mobile phone calls ...................................................................9

. Stereo Pendant paired with USB

Bluetooth dongle and Bluetooth mobile phone Guide [ A & C ] ........................10

1. Pairing .................................................................................................10

2. Listening to music .................................................................................10

3. Monitoring mobile phone calls ................................................................10

. Stereo Pendant paired with

Bluetooth enabled PDA and Bluetooth mobile phone Guide [ A & D ] ...............11

1. Pairing .................................................................................................11

2. Listening to music .................................................................................11

3. Monitoring mobile phone calls ...............................................................11

. Stereo Pendant Connected to Home HiFi and Car Audio System ......................12

Accessories Table .......................................................................................11

FCC Interference Statement ...........................................................13

Declaration of Conformity .....................................................................14

Seven possible User Scenarios

III

VII

VIII

http://www.abe-hk.com

Seven possible User Scenarios:

There are seven (7) user scenarios for you to enjoy the Bluetooth wireless convenience:

Pendant paired

with

Yes

[A]

Bluetooth

mobile phone

(not supplied)

Yes

[B]

Audio Adaptor

(supplied)

[C]

USB Bluetooth

Dongle

(not supplied)

[D]

Bluetooth enabled

PDA with A/V profile

(not supplied)

Scenario

VI Mobile phone calls and music from the

audio source (Notebook/Desktop PC, etc.)

that the BT USB dongle is connected to.

I Mobile phone calls only.

II Music only from the audio source (MP3,

iPod, etc.) that the Audio Adaptor is

connected to.

III Music only from the audio source

(Notebook PC, desktop PC, etc.) that the

Bluetooth USB dongle is connected to.

IV Music only from the PDA.

V Mobile phone calls and audio source

(MP3, iPod, etc.) that the Audio Adaptor is

connected to.

VII Mobile phone calls and music from the

PDA.

I. Stereo Pendant paired with Bluetooth mobile phone Guide[A]

1. Pairing

a. While the Pendant is powered off press and hold .

The LED will flash red and green alternatively, which indicates the Pendant in

Pairing Mode. The Pairing Mode will last for one minute.

b. Follow the operating instructions of your Bluetooth mobile phone to start the

pairing process. Typically, this has to be done by going to a setup or connect

menu and then selecting the options to discover Bluetooth devices. It may take

several seconds to establish a Bluetooth connection. Your phone's display

should indicate that it has found the model name CS8077 ; and prompt you for

a passkey or PIN. Enter a sequence of 0000 .

， button for 4 seconds

““

USB Bluetooth dongle

[C]

Bluetooth Audio Adaptor

[B]

Bluetooth mobile phone

[A ]

Bluetooth enabled PDA

[D]

Bluetooth

Stereo Pendant

1. Charging and recharging the battery

Thank you for buying the new CS8077 Bluetooth Stereo Pendant and the new

CS8082 Bluetooth Stereo Audio Adaptor pack. Before first time use, it is important

to charge the battery of each of them for 6 hours. Connect the A/C power adaptor

cable and the Y-cable together. And then, connect the two ends of the Y-cable to the

Pendant s and the Audio Adaptor's DC socket. During recharging, the LED shows a

steady red light. When the battery is fully charged, the Red LED is off.

CS8082

Bluetooth Stereo Audio Adaptor

CS8077

Bluetooth Stereo Pendant

Pendant

Audio Adaptor

AC Adaptor

DC Socket

2. Low-battery indication

When the battery is low, the LED of the Pendant or that of the Audio Adaptor will

flash red instead of green. When the battery level is too low, the Pendant or the

Audio Adaptor will automatically power off.

or PLAY/STOP

Turning on / Turning off the Pendant and the Audio Adaptor

When the Pendant or the Audio Adaptor is powered off, press and hold or

PLAY/STOP button till the LED flashes green, which indicates the Pendant or the

Audio Adaptor is powered up. When the Pendant or the Audio Adaptor is powered

up, press and hold button, the LED will keep red for a while

then off, which indicates it is powered down.

CS8077 Bluetooth Stereo Pendant

and

CS8082 Bluetooth Audio Adaptor

User Manual

Environmental

friendly

Backward

Reject the call

! Voice dialing

6. VOL +

Power On/ Off

Play

Stop

Pairing

4. VOL -

! Volume down ! LED

! PLAY/STOP! Removeable headphone

! Volume up

1. 2.

Forward

Call transfer

! Redial the last number

II. Stereo Pendant paired with Stereo Audio Adaptor Guide[B]

1. Pairing

a. While the Pendant is powered off press and hold button for 4 seconds.

The LED will flash red and green alternatively, which indicates the Pendant in

Pairing Mode. The Pairing Mode will last for one minute.

b. While the Stereo Audio Adaptor is powered off, press and hold PLAY/STOP

buttons for 2 seconds. The LED will flash red and green alternatively, which

indicates the Audio Adaptor is in Pairing Mode. The Paring Mode will last for one

minute.

c. Put the Pendant and the Audio Adaptor close to each other, 0.5 to 3 meters. After

a few seconds, their LED's will turn into flashing green, which indicates

successful pairing. Both units are in Standby Mode and ready to transmit audio

signal, or music from the audio source.

2. Listening to music

a. After successful pairing, plug the jack of the Audio Adaptor to the 3.5 mm socket

of any audio source such as iPod, MP3, CD player, Notebook PC, or others.

b. Put the earpiece on.

c. Play the music on the audio source as normal; you will listen to the stereo music

from the earpiece.

，

7.Transfer call

a. To transfer a call from the Pendant to your mobile phone

If the mobile phone is enabled with the Hands-free profile, press the

button while the call is in session and it will be transferred to your mobile

phone.

If the mobile phone is enabled with the Headset profile, follow the instructions

of your mobile phone manual to do call transfers.

b. To transfer a call from your mobile phone to the Pendant

Follow the instructions of the mobile phone manual to do call transfers

PLA

Backward

OLV

Forward

Volume up

Volume down

OLV

Summary of content (2 pages)

PAGE 1
c. [B] Audio Adaptor (supplied) [C] USB Bluetooth Dongle (not supplied) [D] Bluetooth enabled PDA with A/V profile (not supplied) AC Adaptor If the pairing is successful, the LED will flash green, which indicates it is in Standby Mode and ready to answer and receive mobile phone calls from it. If pairing does not occur as expected, turn the Pendant and the mobile phone off. Wait for 10 seconds and repeat the pairing process from the beginning. 2. Answering incoming calls / Rejecting incoming calls a.
PAGE 2
d. The speaker volume of the earpiece can be adjusted by pressing and releasing the VOL + / VOL- buttons. e. Turn the Pendant off after use. The Audio Adaptor will be turned off automatically. Next time, you don't need to pair them again. Turn them on, and then they will be paired automatically and ready to transmit music from the audio source.