User Manual

ManualsBrandsIn Tech Electronics ManualsElectronicsBluetooth Car Kit

I-2 Function

I-2-1 On/Off (S1)

I-2-2 Volume Up (S2)

I-2-3 Volume Down (S3)

I-2-4 LED

I-2-5 DC Socket

I-2-6 Foldable Microphone

I-2-7 Speaker

I-2-8 Battery Door

(please refer to Fig.1)

If you press S1, you can:

Switch on and Off

Pair

Answer a new call

Reject a call

Make a new call using voice dialing

Increase the speaker volume

To mute/un-mute the microphone

Redial the last dialed number

Decrease the speaker volume

There are two LED colors (green and red) to indicate the state of this

Car-Kit

Charge your rechargeable battery with a car charger without

loading/unloading any battery

◎

a recharging power socket.

You can adjust this microphone to an appropriate angle to receive a

quality voice.

It serves as

I-2-9 Visor Clip

Clip the hands-free ar it under your car's sun visorCK .

II. How to Use

II-1 Charge the Batteries

II-2 Turn on the Hands-free Car Kit

(.. )

(.)

e g Nokia 3650 or equivalent models

please refer to Fig 2

Before you use for the first time, please charge the batteries for 6 hours.

After the first time, you can fully charge your low batteries in 3 hours.

If the Hands-free Car Kit is powered off,

. A low tone followed by a high tone will indicate the hands-free

Car Kit has turned on. At the same time, Green LED will flash for a

second. And then, green LED will keep on flashing every 3 seconds.

Thank you for buying the Abe BT 77V, Hands-free Car Kit.Bluetooth

.Use only rechargeable batteries

press and hold S1 for 4

seconds

Warning:

Car charger

Fig.2

I. Profile and Its Function…………………………………………………………………………1

I-1 Profile………………………………………………………………………………………1

I-2 Function……………………………………………………………………………………2

II. How to Use! ………………………………………………………………………………………3

II-1 Charge the Batteries……………………………………………………………………3

II-2 Turn on the Hands-free Car Kit………………………………………………………3

II-3 Pair the Hands-free Car Kit with Your Mobile Phone…………………4

II-4 Establish Link………………………………………………………..………5

II-5 Clip the Hands-free Car Kit under Your Sun Visor …………………………………5

II- Answer an Incoming Call………………………………………………………………

II- Transfer Calls between This Hands-free Car Kit and Your Phone…..6

II-8 Make a New Call by Using Voice Dialing……………………………………………6

II- 9 Mute the Microphone……………………………………………………………….…7

II-10 End a Call……………………………………………………………………….…………7

II-11 Reject a Call… …………………………………………………………………..………7

II-12 Redial Last Dialed Number……………………………………………………………7

II-13 Adjust the Speaker Volume…………………………………………………….………7

II-14 Recharge the Low Batteries…………………………………………………..………8

II-15 Turn off the Hands-free Car Kit…………………………………………………………8

III Maintenance and Safe Use…………………………………………………………….………9

IV Package Contents………………………………………………………………….……………9

FCC Interference statement …………………………………………………………………………1

Bluetooth

Bluetooth7

6 6

BT 77V

Bluetooth Hands-free Car Kit

http://www.abe-hk.com

Table of Content

I Profile and Its Function.

I-1 Profile (Fig.1)

2. Volume Up (S2)

3. Volume Down (S3)

1 On/Off ( S1).

4. LED

5. DC Socket

6. Foldable Microphone

8. Battery Door

7. Speaker

9. Visor Clip

Fig. 1

User Manual

II-3 Pair the Hands-free Car kit with Your Mobile Phone

II-3-1 Put the hands-free Car Kit in pairing mode

II-3-2 Put your mobile phone in pairing mode

II-3-3 Pair the hands-free Car Kit with your mobile phone

Bluetooth

Make sure if pairing does not occur as expected, turn off the

hands-free Car Kit and your phone, then wait for 10 seconds.

Turn on them again and repeat from Step 3-1 to Step3-3

II-3-2-1 Follow the operation manual of your mobile

phone to start the pairing process. Typically, this has to be done

by going to a setup or connect menu and then selecting the options

to discover devices. may take several

seconds to establish a connection.

II-3-2-2 Your phone's display will indicate that it has found the new

device “BT 77V” and asks if you want to pair it. You should confirm

this. The phone's display would demand a passkey or PIN, then

you can enter a sequence of “0000”.

The green LED of hands-free Car Kit will flash every 3 seconds

indicating successful pairing. Usually the phone will also ask

whether you want to change the Car Kit's name. We recommend

you should approve the name of “BT 77V” and do not change it.

Bluetooth

Bluetooth Bluetooth

When the hands-free Car kit is powered off, press and hold S1 for 8

seconds. In the first 4 seconds, a low tone followed by a high tone

will indicate the hands-free Car Kit has turned on. At the same

time, Green LED will flash for a second. In the 2nd 4 seconds, a

high tone will occur. Then the red and green LEDs will flash

alternatively, which indicates the hands-free Car Kit has entered

into the paring mode.

Notice:

Make Sure the batteries are fully charged.

II-4 Establish Link

II-5 Clip the Hands-free Car Kit onto Your Sun Visor

Bluetooth

After pairing, the mobile phone will show “connect”, then please select

“YES” to establish the link. Now you are ready to make and answer calls on

the hands-free Car Kit.

(Please refer to Fig. 3)

For other phones, please follow their operation manuals to establish

the link!

Notice:

II-6 Answer an Incoming Call

II- Transfer Calls between This Hands-free Car Kit and Your

Phone

II-8 Make a New Call by Using Voice Dialing

II-8-1 When using a mobile phone:

II-8-2 When using a mobile phone without built-in and

requiring a dongle:

When an incoming call is present, the hands-free Car Kit will ring. Press

S1 and you can answer the call. The green LED will continue to flash once

a second while the call is in session.

When you are in session, calls can be transferred from your

phone to the hands-free Car Kit and vice versa.

V- -1 From phone to the Car Kit

Press S1 once, the call will be transferred to the Car Kit.

V- -2 From Car Kit to the Phone

Please follow the operation manual of your phone.

II-8-1-1 Press S1 on the hands-free Car Kit shortly.

II-8-1-2 Put through the call

After the beep tone on the hands-free Car Kit, you can make a voice

dial by saying the name of the person on the hands-free Car Kit. The

call will be connected in a few seconds.

II-8-2-1Press S1 on the hands-free Car Kit shortly

II-8-2-2 Put through the call

After the beep tone on the hands-free Car Kit, you can make a voice dial

and the call will be connected in a few seconds.

7 Bluetooth

Bluetooth

Make sure that the voice dialing function is probably set up in

the mobile phone and it is within the range of the hands-free Car Kit.

Make sure that the voice dialing function is probably set up in

the Mobile phone and it is within the range of the hands-free ar it.

Notice:

II-9 Mute the Microphone

II-9-1 To mute a microphone during an active call

II-9-2 To un-mute a call

II-10 End a Call

II-11 Reject a Call

II-12 Redial Last Dialed Number

II-13 Adjust the Speaker Volume

When the microphone is muted, press S2 for about 2 seconds. Then the

mute function will end and the periodic beep tone will stop.

While a call is in session on the hands-free Car Kit, press S1 and you will

disconnect the call. After the call is disconnected, the green LED will

flash normally.

When the hands-free Car Kit is ringing, press S1 until you hear a long beep

tone.

To redial the last dialed number, press S3 for 2 seconds. Short low tones

will indicate an attempt to redial.

While a call is in session, pressing and releasing S2 will increase the

speaker volume, and pressing and releasing S3 will decrease the speaker

volume.

Press S2 for about 2 seconds and a beep tone will indicate the microphone

is muted. A periodic beep tone will be heard while the mute function is

active.

Fig. 3

CS8045

Summary of content (2 pages)

PAGE 1
CS8045 TM BT 77V Bluetooth Hands-free Car Kit R User Manual I-2 Function (please refer to Fig.1) I-2-1 On/Off (S1) If you press S1, you can: ◎ Switch on and Off ◎ Pair ◎ Answer a new call ◎ Reject a call ◎ Make a new call using voice dialing I-2-2 Volume Up (S2) ◎ Increase the speaker volume ◎ To mute/un-mute the microphone I-2-3 Volume Down (S3) ◎ Redial the last dialed number ◎ Decrease the speaker volume I-2-4 LED There are two LED colors (green and red) to indicate the state of this Car-Kit .
PAGE 2
II-1 4 Recharge the Low Batter ies (please refer to Fig.2) The LED of this Car Kit will flash red instead of green when the battery are low. There will also be a short beep every 2 minutes. Please connect the charger cable to the Car Kit. II-14-1 During recharging The LED shows a steady red light if the Car Kit is off, and the red light will dim once every second while the Car Kit is on. II-14-2 Fully charge When the batteries are fully charged, the red and green LED will be exchanged.