in-lite INSTALLATION MANUAL SMART BRIDGE INSTALLATION MANUAL SMART BRIDGE Attention This product may only be used within the in-lite system. If components are used in the system that do not originate from in-lite, the warranty no longer applies. Install the in-lite system components (fixtures, transformers, mini-connectors, Easy-Locks and cable connectors) in a way that they can easily be replaced Never use the in-lite low-voltage cable directly connected to 100-230V.
in-lite INSTALLATION MANUAL SMART BRIDGE Contents 1x SMART BRIDGE Input: 12V DC, max. 1A. Frequency: 2400-2480 MHz, max. 20 dBm. 1x POWER ADAPTER Input: 230V AC, 50 Hz. Output: 12V DC, max 1A. 1x SCREW 1x ETHERNET UTP CABLE, max. 1m. Or, 1x SMART BRIDGE 120V Input: 12V DC, max. 1A. Frequency: 2400-2480 MHz, max. 20 dBm. 1x POWER ADAPTER 120V Input: 120V AC, 60 Hz. Output: 12V DC, max 1A. 1x SCREW 1x ETHERNET UTP-CABLE, max. 1m. Please read the following instructions before installing.
in-lite INSTALLATION MANUAL SMART BRIDGE Safety Along with the SMART BRIDGE a power adapter is supplied. This is the only way to connect the product to the main power source of 100-230V. When the adapter is connected in a wrong or insufficient way the SMART BRIDGE will show with a led signal that it’s facing a power supply issue. Intill this issue is solved it will do so. Description Power limitation Smartbridge The adapter limits the power supply to 12V DC with a max. of 1A.
in-lite INSTALLATION MANUAL SMART BRIDGE EU Declaration of Conformity "Hereby in-lite Design B.V. declares that the radio equipment SMART BRIDGE is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available via in-lite Customer Service. IC Statement This device complies with Industry Canada licence-exempt RSS standard(s).
in-lite (1) (2) INSTALLATION MANUAL SMART BRIDGE This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
in-lite INSTALLATION MANUAL SMART BRIDGE Installation The SMART BRIDGE is easy to install. After having installed an in-lite SMART HUB and having downloaded and installed the in-lite application (app), the SMART BRIDGE is ready for connection. Mount the product at max. 50 cm distance of an ethernet router (connection point) and connect the UTP-cable on both the BRIDGE and the router.
in-lite INSTALLATION MANUAL SMART BRIDGE Installation step by step The SMART BRIDGE is designed to be installed inside, preferably within 50 cm of an ethernet router (connection point) to create a wired connection. Installing the transformer Step 1 Open the package of the SMART BRIDGE. Here you will find the screw for mounting the transformer on its intended position. Mount the product to a wall, panel or post using the screw supplied. See FIG. 1.
in-lite INSTALLATION MANUAL FIG. 1 www.in-lite.
in-lite INSTALLATION MANUAL SMART BRIDGE Installing the in-lite app Step 1 Open the app store on your Android or iOS device (smart phone or tablet). Search for in-lite and download the app. Step 2 Open the app on your device. You have two options to select; you’re a new user or you already have an account. (Fig. 2) FIG. 2 Step 3 Follow the instructions in the app. You’ll be guided through the process of logging in or creating your account.
in-lite INSTALLATION MANUAL SMART BRIDGE When you’ve created an account before you can log in with the code you’ve got by email. (Fig. 17) It’s also possible to skip the set-up when it has already been done by someone else and you’ve got a share code. You use that code to log in. (Fig. 18) Step 4 After logging in or creating your account you can connect accessories; also the SMART BRIDGE is available. Go to “my gardens” and select the garden in which you want to add the SMART BRIDGE.
in-lite INSTALLATION MANUAL FIG. 7 FIG. 8 www.in-lite.
in-lite INSTALLATION MANUAL FIG. 9 FIG. 10 www.in-lite.
in-lite INSTALLATION MANUAL FIG. 11 FIG. 12 www.in-lite.
in-lite INSTALLATION MANUAL FIG. 13 FIG. 14 www.in-lite.
in-lite INSTALLATION MANUAL FIG. 15 FIG. 16 www.in-lite.
in-lite INSTALLATION MANUAL FIG. 17 FIG. 18 www.in-lite.
in-lite INSTALLATION MANUAL FIG. 19 FIG. 20 www.in-lite.
in-lite INSTALLATION MANUAL FIG. 21 FIG. 22 www.in-lite.
in-lite INSTALLATION MANUAL FIG. 23 www.in-lite.
in-lite INSTALLATION MANUAL SMART BRIDGE Use in general Manual use Press the on/off button on the side of the transformer to switch between “ON” and “OFF”. When the transformer is switched to “ON”, the light settings in the device application (in-lite app) are activated. If one or more light sections (total 3) are set to “ON” they will be activated; the lights switch on. The light sections that are set to “OFF” stay deactivated. The first time while installing, all light sections will be set to ‘ON”.
in-lite INSTALLATION MANUAL SMART BRIDGE Troubleshooting tips The lighting does not switch on with any of the programs. Check that the transformer is correctly connected. If so, check the voltage at the electric socket (you can do this using a voltage tester). Check that the low-voltage cable is correctly wired to the transformer. Only a few lamps switch on. Check that the contacts of the fixture’s Easy-Lock have correctly pierced the insulation of the cable.
in-lite INSTALLATION MANUAL SMART BRIDGE Installation tips Tip 1 Use plenty of cable for the installation. In that case the cable will have enough length if the garden subsides a little. Tip 2 Insulate the cable ends with caps. You can do this by pulling the end three centimetres of cable apart and putting a cap on each end. You do not need to remove any insulation from the cable. Tip 3 When connecting the fixtures leave plenty of cable from the fixture.