Quick Start Guide

Version 1.0 Part Number: 102960-01 © 2021, Impinj, Inc. Version 1.0 Part Number: 102960-01 © 2021, Impinj, Inc.
RESOURCES & NEXT STEPS
Develop business applications using the Impinj IoT device interface, Impinj Octane SDK,
the Impinj Octane LLRP toolkit, or Impinj R510 ETK. For more information, contact Impinj
using the resources listed below.
• Sales: www.impinj.com/contact-us
• Support: support.impinj.com
• Developer site: developer.impinj.com
• Postal Address: 400 Fairview Avenue North, Suite 1200, Seattle, WA 98109
NOTICES
Copyright © 2021, Impinj, Inc. All rights reserved.
Impinj gives no representation or warranty, express or implied, for accuracy or reliability of information in
this document. Impinj reserves the right to change its products and services and this information at any
time without notice.
EXCEPT AS PROVIDED IN IMPINJ’S TERMS AND CONDITIONS OF SALE (OR AS OTHERWISE
AGREED IN A VALID WRITTEN INDIVIDUAL AGREEMENTWITH IMPINJ), IMPINJ ASSUMES NO
LIABILITY
WHATSOEVER AND IMPINJ DISCLAIMS ANY EXPRESS OR IMPLIEDWARRANTY, RELATED TO
SALE AND/OR USE OF IMPINJ PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING
TO FITNESS FOR A PARTICULAR PURPOSE,MERCHANTABILITY,OR INFRINGEMENT.
NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY PATENT,
COPYRIGHT, MASKWORK RIGHT, OR OTHER INTELLECTUALPROPERTY RIGHT IS GRANTED BY
THIS DOCUMENT.
Impinj assumes no liability for applications assistance or customer product design. Customers should
provide adequate design and operating safeguards to minimize risks.
Impinj products are not designed, warranted or authorized for use in any product or application where a
malfunction may reasonably be expected to cause personal injury or death or property or environmental
damage (“hazardous uses”) or for use in automotive environments. Customers must indemnify Impinj
against any damages arising out of the use of Impinj products in any hazardous or automotive uses.
Impinj, Monza, Speedway, xArray, xSpan are trademarks or registered trademarks of Impinj, Inc. All
other product or service names are trademarks of their respective companies. For a complete list of
Impinj Trademarks visit: www.impinj.com/trademarks
The products referenced in this document may be covered by one or more U.S. patents. See
www.impinj.com/patents
for details.
OVERVIEW
This guide provides simple steps to quickly start using
your new Impinj R510 RAIN RFID reader. Please
consult the Impinj R510 RAIN RFID Reader
Datasheet for more information regarding
mounting choices, antenna types, power and
network connection methods and reader
configuration options.
Box Contents
• 1 x Impinj R510 RAIN RFID reader
• 1 x Quick Start Guide
Accessories Sold Separately
•
PoE Injector
• PoE Injector AC power cords
• Reader antennas
• Antenna cables
Connections and Ports
•
4 x RP-TNC antenna ports
• RJ-45 10/100/1000BASE-T Ethernet port
• 3 x USB Type-A host ports
• GPIO terminal block
• Factory reset button
• Micro USB device port
Download Impinj ItemTest software
1. Open a browser on your Microsoft Windows PC and go to
https://support.impinj.com
.
2. Type “Impinj ItemTest software” into Search Support and click the “Impinj
ItemTest Software” link and download the latest version
NOTE: The Impinj R510 is only supported in Impinj ItemTest version 2.6 and
newer.
3. Extract the files and run the executable to install Impinj ItemTest
Impinj R510 RAIN RFID Reader
Quick Start Guide