UKW-/DAB+ UHRENRADIO Bedienungsanleitung
Index: Features 21 Overview of the radio 22 Getting started 24 Clock operation 25 Using the auto-radio function 28 Dimmer operation 28 Temperature and humidity record 28 About the weather indicator 29 Menu-Clock 29 Operating your radio DAB+ 30 Operating your radio FM 34 Direct memory station –DAB+ and FM 35 Setting the sleep timer-DAB+/FM 35 Battery replacement 36 Batteries safety warnings 36 Precautions 37 20
Features • Display of Time, Calendar, Day of the week, Temperature, Humidity and Weather forecast • MAX/MIN Temperature and Humidity record • 12/24 Hour format selectable • Auto time update function • Alarm and snooze • FM Reception(87.5MHz~108MHz) • DAB/DAB+ Reception BAND III 174.928MHz(5A) ~ 239.
2. OVERVIEW OF THE RADIO 1. LCD display 2. Loud speaker 3. Volume control 4. Channel selection 5. SLEEP key 6. Power key 7. DAB+/FM slide switch 8.BEEP/OFF/AUTO slide switch 9. SNOOZE/LIGHT key 10. Memory keys 11. SCAN / < key 12. INFO / > key 13. OK/MENU key 14. DIMMER slide switch 15. TIME key 16. ALARM key 17. MAX/MIN key 18. RESET key 19. DC Socket 20. Headphone Socket 21. Temperature sensor 22. Battery door 23.
7 8 9 10 11 12 6 5 13 23 22 21 14 15 16 17 18 19 20 23
3. GETTING STARTED 1. If using battery to power the unit, remove the battery door at the back of the unit by slightly sliding the door upwards. 2. Insert 4 new AA size batteries into the battery compartment. Ensure all the batteries are inserted with the correct polarity as shown inside the battery compartment. 3. Replace the battery door. 4. If using DC adaptor to power the unit, plug the DC adaptor into the DC socket, and connect another end of the adaptor to the mains power. 5.
Note: 1. The initial time is 12:00 am when you use the clock first time, or repower the clock. 2. The signal reception will last 10 seconds if there is no signal received. 3. The DAB+/FM radio may consume more power, so you can use the mains power when you use the radio, and use the battery to retain the clock time. 4. CLOCK OPERATION 4.1 Time and Calendar setting 1. Press and hold “TIME” key for 2 seconds to enter time setting mode with Hour digit flashing. 2.
Normal mode Hour setting Date setting Month setting Minute setting Second setting Year setting Hour format setting Note: For Second setting, press “<” / “>” key to set the value to 00. 4.2 Alarm Time setting 1. Press and hold “ALARM” key for 2 seconds to enter alarm time setting mode with Hour digit flashing. 2. Press “<” / “>” key to adjust the value of flashing digit. (Press the key without releasing to speed up the setting.) 3.
Normal mode Hour setting Minute setting Note: In normal mode, press “ALARM” key to display the alarm time for one minute. 4.3 Using the Alarm and Snooze 1. Slide the “BEEP/OFF/AUTO” switch to BEEP postion. 2. Set the alarm time as the above described. 3. When the clock reach the alarm time, the alarm will sound. Where, it can be stopped by follwing operation: a) Auto stop after 2 minutes sounding without any operation, and it will re-alarm by the next day.
5. USING THE AUTO-RADIO FUNCTION 1. Slide the “BEEP/OFF/AUTO” switch to AUTO postion. And slide the “DAB+/FM” switch to DAB+/FM position. 2. Set the alarm time as the above describtion. 3. When the clock reach the alarm time, it will automatically turn on the radio you selected. 4. Press the “POWER” key to turn off the radio. And the radio will automatically turn on by the next day. 6. DIMMER OPERATION You may adjust the LCD brightness by sliding the “DIMMER” switch. 1.
Normal mode Max. Temperatur Min. Temperature Note: Once you reset or repower the unit, all the records will be defaulted. 8. ABOUT THE WEATHER INDICATOR The built-in barometer can notice atmosphere pressure changes. Based on the data collected, it can predict the weather conditions in the forthcoming 12-24hours. Sunny Slight cloudy Cloudy Rainny Note: 1. The accuracy of a general pressure-based weather forecast is about 70% to 75%. 2. The weather forecast is meant for the forthcoming 12-24 hours.
9. MENU-CLOCK 1. Press “OK/MENU” key or press “CH” selection to access the main menu. 2. Rotate “CH” selection to select Language or Auto Update Time. Press “OK” / “CH” to confirm your selection and enter its sub-menu. Note: 1. There are five languages to select(English / German / French / Dutch / Italian ), the display of the unit will change according to the language you selected. But the information received from DAB station will not change. 2.
4. Rotate “CH” selection to select your desired station and press “OK/MENU” key or “CH” selection to confirm. 5. Rotate “VOL” control to adjust your desired volume. 6. Press “VOL” control to make your radio mute. Press it again or rotate it (right) to volume up your radio. 7. Press “POWER” key again to turn off the radio. Note: If the station list is still empty after the Auto-tune your radio will display “No DAB station”, so it may be necessary to relocate your radio to a position giving better reception.
10.2 Channel Information display During you listen to a DAB+ radio, repeatedly press “INFO” key to display the detail information of current channel. Current Station Frequency Signal quality Audio format Data Rate Program Type 10.3 Factory Reset 1. Press and hold “SCAN” key for 2 seconds to reset the radio that all the records(station record and memory record) for FM&DAB will be defaulted. Note: Factory Reset function only be operated in DAB+ radiomode. 10.4 Menu-DAB+ 1.
2. Rotate the “CH” selection to display the setting item in this sequence: Language > DRC value(DAB) > Manual tune(DAB) > EQ(Radio) > Station Order(DAB) > Auto Update Time > Scrolling Speed(Radio) > Back. 3. Select your desired item and press “OK/MENU” key to enter its sub-menu, select your desired value and press “OK” key to confirm the setting. Note: In menu mode, it will automatically return to previous menu when there is no operation in 3 seconds. 10.4.1 Manual tune 1.
11. OPERATING YOUR RADIO-FM 11.1 Power on - FM 1. Carefully extend the telescopic aerial, and slide “DAB+/ FM” switch to FM position. 2. Press “POWER” key to turn on your radio. 3. For the first time you use the radio, the default radio frequency is 87.5MHz, you can manually select your desired channel by rotating the “CH” selection. 4. Rotate “VOL” control to adjust your desired volume. 5. Press “VOL” control to make your radio mute. Press it again or rotate it (right) to volume up your radio. 6.
11.3 Menu-FM 1. Press “CH” selection or “OK/MENU” key to access the main menu. 2. Rotate the “CH” selection to display the setting item in this sequence: Language > EQ(Radio) > Auto Update Time > Scrolling Speed(Radio) > Back. 3. Select your desired item and press “OK/MENU” key to enter its sub-menu, select your desired value and press “OK” key to confirm the setting. Note: 1. In menu mode, it will automatically return to previous menu when there is no operation in 3 seconds. 12.
2. Press “SLEEP” key again to select the desired sleep time. Each press changes the setting time as following: 15 > 30 > 60 > 90 >00 minutes. 3. When it reach the time you set, the DAB+/FM radio will turn off automatically. 14. BATTERY REPLACEMENT If the low battery indicator “ ” displayed on the LCD, please replace with 4 new AA size batteries at once. 15. BATTERIES SAFETY WARNINGS - Please read all instructions carefully before use. - Use only alkaline batteries, not rechargeable batteries.
16. PRECAUTIONS - This main unit is intended to be used indoors only. - Do not subject the unit to excessive force or shock. - Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity. - Do not immerse in water. - Avoid contact with any corrosive. - Do not dispose this unit in a fire as it may explode. - Do not open the inner back case or tamper with any components of this unit.
