INSTRUCTION MANUAL
1 Setup and use your digital video baby monitor Installing Baby Unit 1 Connect the small plug of power adapter to the Baby unit and push the Micro USB to the end. Only use the enclosed adapter (5V DC 1000mA). Press the “POWER” button to turn on baby unit. You will see green LED is turned on. 2 Place Baby Unit on a flat surface, such as a desk or shelf or mount the camera on a wall. LED 3.3 ft Never place the baby unit or the cord within 3.3 ft of the crib.
Precaution: use of battery for Parent Unit 2 When battery level is low, the power on off LED flashes red, monitors comes with sound alert and battery icon on LCD display flashes red. Extend life cycle of battery : Only charge the battery when the battery life indicator is low. Constant recharging of your battery before the low battery indicator light comes on will decrease the life of your batteries. Optimize battery life : Louder speaker level consume more battery power and shorten battery life.
3 Frequently Asked Questions Battery not holding a charge/Monitor cannot turn on Remove battery from battery compartment and reinstall battery. Monitor cannot hold camera connection Please check whether monitor is selected to CAMERA SCAN mode. Monitor switches between paired cameras around every 10 seconds. When monitor switch the camera which is not powered on, monitor display Lost Link. You could use SPLIT VIEW button to select the camera you want to watch.
Frequently Asked Questions 3 Sound Bar This sound bar is designed for deaf parents to reflect sound level picked up from camera. You could disable this display in menu.
3 Save more battery energy with ECO mode by switching off both screen and audio POWER SAVING button switches off screen and keeps audio on (default setting "SCREEN OFF"). You have another choice of switching off both screen and audio by using ECO mode option. In ECO mode, both sound and screen is shut off when monitor is entering POWER SAVING. Monitor will be activated when camera detects sound that exceeds the activation sound level you selected (Default level is medium).
3 Switch off “On screen tips” We try to explain status and function on screen. When you are familiar with this monitor, you could switch off this on screen tips in menu.
3 Pairing Camera Choose from unpaired cameras in Menu first, you would see pairing message shows up on screen. During the pairing message is on screen, press camera pairing button 1 seconds. When camera and monitor is paired, video is on screen automatically.
WARNING STRANGULATION HAZARD - Children have STRANGLED in cords. Keep this cord out of reach of children (more than 3 feet/1 meter away from the crib). Never use extension cords with AC adapters. Only use the AC Adapters provided. WARNING WARNING Adult assembly required. Keep small parts away from children when assembling. THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION Warning Informa�on *Keep this instruc�on manual for future reference. *For adult use only.
This device complies with Part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired opera�on. Federal Communica�on Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.