Setup and use your digital video baby monitor Installing Baby Unit 1 Connect the small plug of power adapter to the Baby unit and push the DC Jack to the end. Only use the enclosed adapter (SV DC 1000ma). Short press the pairing button to tum on baby unit. You will see ‘green LED is muted an. 2 Place Baby Unit on a flat surface, such ag a desk or shelf ‘or mount the camera on a wall. Never clap the baby unit or the cord 3 Connect the small plug of power adapter to Parent unit and push the connector the end.
Precaution: use of battery for Parent Unit When battery level ls low, the power on off LED fishes rad, monitors comes with sound alert and battery icon on LCD display flashes red. Extend Fife cycle of battery : Only charge the battery when the battery Ife indicator is low. Constant recharging of your battery before the low battery indicator light comes on will decrease the life of your batteries. Optimize battery life : Louder speaker level consume more battery power and shorten battery life.
Fragrantly Asked Questions v Battery not holding a charge/Monitor cannot turn on A Remove bestiary from battery compartment and reinstall battery. Monetary cannot hold camera connection 3 “4 Pi case check whether monitor I selected to CAMERA © SCAN mode. Monitor switches between paired {t= ‘cameras around every 10 seconds. When monitor < switch the camera which is not powered on, monitor display Last Link. You could use SPLIT VIEW button to select the camera You want to watch.
£0 Save mots battery energy with ECO mods by switching off both «screen and audio A POWER SAVING button switches off screen and keeps audio on (fatuity sating "SCREEN OFF}. You have another chaise of switching off both screen and audio by using ECO mode option. In ECO mods, both sound and screen is shut off when monitor is entering POWER SAVING. Monitor will be activated when camera detects sound that exceeds the activation sound level you selected {Fatuity tea! is radium}.
@ Pairing Camera "A Choose from unpaired cameras in Menu first, you would see pairing message shows up on screen. During the pairing message is on screen, press camera pairing button 3 seconds. When camera and monitor is paired, dived is on screen automatically.
Optical Lens Accessory Lens type: Default lens hood Lens description: To protect camera actual lens inside from being touched. There ig no video effect when lens hood in on. Lens type: Optical Wide Angle Lens (Additional Purchase) Lens description: Wide Angela Lana view more in picture. Object become farther and smaller. Surrounded area are in slight distortion. This lens is sold separately and recommended to be used when you intend to have overview of the room.
“This clean camps with Part 15 of the FOC Rules. Operation s sue t the flowing twa editions: {1) This device may nat cause harmful Interference, and (2) This device must accept any Interference received, Inching Interference that may cause undesired operation. Federal Communication Commission Interference Statement “This squirt has bas taster! ar fount comply with the limits far « Class 8 digital Davies, pursuant to Part 15 of the FCC Rules.