User's Manual

ManualsBrandsIMILAB ManualsElectronicsIMILAB Video Doorbell

上海创米科技有限公司

033

V2.2

V1.0 创建图档

V1.1 加尺寸、标颜色等

20211117

周晓玲

选择正确的

方向图标拖

动到图纸里

纹理方向

色相正确、印迹牢固、

套印准确、各色套印

不露杂色，套印误差≤ 0.1mm

模切走位≤±0.5mm

（示例具体以实物为准）

修改内容版本

修

改

记

录

材质：太空梭105g无光铜亚粉

尺寸：105 × 148mm

风琴折

Pantone Cool Gray 11C、C:0 M:20 Y:100 K:0

CONTENTS

English 01-10

00-00Deutsche

00-00Español

00-00Italiano

00-00Français

00-00Pусский

All products bearing this symbol are waste electrical and electronic equipment

(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted

household waste. Instead, you should protect human health and the environment

by handing over your waste equipment to a designated collection point for the

recycling of waste electrical and electronic equipment, appointed by the

government or local authorities. Correct disposal and recycling will help prevent potential

negative consequences to the environment and human health. Please contact the installer

or local authorities for more information about the location as well as terms and

conditions of such collection points.

WEEE Information

Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type

IMILAB EC4 is in compliance withDirective 2014/53/EU.

Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type

IMILAB Smart Hub is in compliance with Directive 2014/53/EU.

EU Declaration of Conformity

FCC Statement

Changes or modiﬁcations not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment. This device complies with Part

15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment oﬀ and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver

is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC 20cm Statement: This equipment complies with FCC radiation exposure limits set forth

for an uncontrolled environment. This equipment should be installed and operated with

a minimum distance of 20cm between the radiator & your body. This transmitter must not

be co-located or operating in conjunction with any other antenna or transmitter.

Speciﬁcations

Safety statement

Name: IMILAB Video Doorbell Model: CMSXJ33A

Resolution: 2560x1440 Aperture: F1.6

Item Dimensions: 60 x 33 x 142 mm Power Input: 5 V 2 A

Operating Temperature: -20 °C ~ 50 °C FCC ID：XXXXXXXX

Name: IMILAB Doorbell Hub

Model: CMWG33B

Power Input: 100-240V~，50/60hz，0.3A MAX

Item Dimensions: 57 x 34 x 105mm

Operating Temperature: -10 °C ~ 45 °C

Expandable Memory: MicroSD card(up to 64 GB)

Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz

FCC ID：XXXXXXXX

Product overview

Hub

Status LED

MicroSD

Card Slot

Speaker

Reset Button

Power

Explanations for LEDS

Hub LED Status

Blinking blue

Blue and orange

ﬂashes alternately

Solid blue

Waiting for connection

Network connection is successful / connected

Network connection is failure

Status

Solid orange A ﬁrmware update is in progress

Press and hold the button

for 10 seconds, until the

LED blinks blue

During the reset process, the hub will restart

Blinking orange Waiting for doorbell to connect

The suitable operationg temperature range for this product is between -20℃~50℃.

Don't use the product in an environment with temperatures above or below the

speciﬁed range.

When charging, the operating tempreture range for this product is between 0°C~ 45°C.

Don't charge the product in an environment with temperatures above or below the

speciﬁed range.

Using the product in a low tempreture environment or charging status will aﬀect its

standby time. The actual standby time is related to the user's environment and habbit.

To improve the product's performance, please do not place the video doorbell lens

facing or next to a reﬂective surface, such as glass windows/doors and white walls,

which will cause the image to appear overly bright inareas close to the video doorbell

and darker in areas further away, or cause the video doorbell to produce white images.

Please install the product in areas with Wi-Fi reception, and try to place the device

where the Wi-Fi signal is strong. In addition, please keep the security video doorbell

away from metal structures, microwave ovens, or other locations where signal strength

may be impacted.

Don't replace the battery in video doorbell yourself—if not properly replaced, there is a

danger of explosion.

Battery (battery pack or batteries) must not be exposed to sunlight, ﬁre, or similar

overheating conditions.

This product is a low power consumption video doorbell with battery built-in. Don't use

Real-Time Monitoring feature for long time when charging, in order to avoid battery life

loss.

Do not use the device in the environment at too high or too low temperature, never

expose the device under strong sunshine or too wet enviroment.

Precautions

EN-02

IMILAB

Video Doorbell Set

User Manual

Read this manual carefully before use,

and retain it for future reference.

EN DE ES FRIT RU

Charging the doorbell

5V USB Charger

EN-03 EN-04 EN-05 EN-06

Mounting the video doorbell

Find a Mounting Spot

Take the video doorbell to your front door and check the live view on the App at the same

time. Find a location where you can get the desired ﬁeld of view.

Consider the below factors:

1.If you want to place the doorbell close to a side wall, make sure the wall doesn’t show

up in the ﬁeld of view. Otherwise IR light will be reﬂected and night vision will become

blurry.

1.2m

(48”)

(40”)

0.3m

(12”)

1.76m

（5‘9”）

Place the Screw Hole Positioning Card against the wall to mark the position.

2.If you are drilling the mounting holes for the ﬁrst time, the recommended mounting

height is 48”/1.2 m from the ground.

3.Use the 15

° mounting wedge as a supplementary mounting bracket if you wish to see