IMILAB EC3 Outdoor Security Camera User Manual
Please read this instruction manual carefully before using the device and retain it for future reference. Product Introduction Reset button Wall base (can be rotated to adjust the camera angle) Micro SD card slot Knob Speaker In this instruction manual, images of the device, accessories and user interface are for illustrative purposes only and should only be used for reference. The actual device may differ from the illustrations due to product updates and upgrades. Please refer to the actual device.
Antenna Mic Indicator light Power supply LAN port Packing list: IMILAB EC3 Outdoor Security Camera, wall mounting pack, power adapter, waterproofing tape for power/LAN cable,user manual
Installing the Device Assemble the camera as shown below. Then secure the camera to the metal rod with a screw. Locking mechanism Connecting screw (1 spare screw is available in the accessory pack) Note: The warranty does not cover any damage caused by improper installation. Please follow the instructions. Mounting the device Note: Please check that the Wi-Fi signal is strong enough before mounting the device. 1. Attach the positioning sticker on the desired installation location.
2. Insert four plastic expansion nuts into the holes. 3. Cover part of 2-in-1 power and LAN cable with the base plate as indicated.
4. Put the base plate on the wall. Ensure that the 2-in-1 power and LAN cable goes straight down. Secure the base plate by inserting the screws into the expansion nuts. Note: In order to prevent accidents and injuries, please secure the device firmly onto the wall as illustrated. The wall on which the device is mounted must have a loading capacity of at least 3 times the weight of the device.
The distance between the base plate and the wall should be at least 50mm to allow for a safety turning distance. Any gap of less than 50mm will result in an obstruction to the camera's movement. Waterproofing kit The camera has a power supply port and a LAN port. Waterproofing must be done on both these ports. 1. Wrap the power supply port with the waterproofing tape as shown below. 2. Wrap the LAN port with the waterproofing tape or a waterproofing sleeve.
Wrapping with the waterproofing tape Scan the QR code below to follow the IMiLab WeChat account. Public WeChat account. Public WeChat account Connecting the Device Turn on the camera Step 1: Insert the power supply cable into the camera's power supply port. Connect the other end of the power supply cable to a power source. Step 2: When connected to a power supply, the indicator light will show the camera's status.
MicroSD Micro SD card slot Note: When inserting or removing the micro SD card, please disconnect the camera from the power supply. Please use a micro SD card from a reputable manufacturer. The recommended read and write speed of the micro SD card is at least U1/Class 10. Restoring factory settings Press and hold the reset button to restore the factory settings. The content inside the micro SD card will not be deleted.
Specifications Name: IMILAB EC3 Outdoor Security Camera Model: CMSXJ25A Item Dimensions: 117*91*116mm Input: 12V Net Weight: 495g 1A Resolution: 1920×1080 Lens Angle: 110° Operating Temperature: -20℃~ 40℃ Aperture: F1.6 Video Encoding: H.265 Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz LAN Connection: 1 x 10/100M adaptive network port Compatible With: Android 4.4 or iOS 9.0 or higher FCC ID: 2APA9-IPC025B Manufacturer: Shanghai Imilab Technology Co., Ltd.
Connecting to Mi Home App This product works with Mi Home and can be controlled using the Mi Home app. Scan the QR code to download and install the Mi Home app. If you already have Mi Home app installed, you will be directed to the device connection page. You can also search for "Mi Home" in an app store to download and install the Mi Home app. About Works with Mi Home A product that works with Mi Home can be controlled using the Mi Home app.
Infrared Night Vision The light sensor can automatically switch the device to night vision mode through IR-CUT based on changes in the lighting of the environment. The device features 10 built-in infrared night vision lights that ensure recording stays clear even in darkness.
Video Playback Past videos can only be viewed when a compatible micro SD card is inserted in IMILAB EC3 Outdoor Security Camera. After inserting a micro SD card and turning on the device, the camera will automatically start recording. In the control interface for . in the Mi Home app, tap the playback button to enter the video playback page. You can also view a recording by selected a time period. 06:20 IMiLab Smart Camera Outdoor...
Sharing a Video In the control interface for IMILAB EC3 Outdoor Security Camera in the Mi Home app, you can set the device as a shared device in the settings menu and invite others to watch the recordings. Users must download the Mi Home app and login to their Xiaomi account in order to view the recordings of the shared device. General settings Rename IMiLab Smart Camera...
Home Security The Home Security function can be turned on/off in the control interface for IMILAB EC3 Outdoor Security Camera in the Mi Home app. The device can detect and record movements within the viewing angle and push the recording to the client. Users can set the surveillance time, alert sensitivity, alert interval, etc.
Precautions The working temperature of the device is -20℃ to 40℃. Do not use the device when the temperature is too high or too low. For better results, avoid placing the camera in front of or next or a glass surface, a white-colored wall or other reflective surfaces as this may cause the recording to have un-even lighting between the foreground and background or be over-exposed. Please ensure that the device is within Wi-Fi signal coverage. Place it at a location with good Wi-Fi signal strength.
residential installation. This equipment generates, uses, and canradiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that product should not be disposal with other household wastes through out the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.