User's Manual
Front page in English
English
iOS
Settings Bluetooth
Android
Settings
Bluetooth
Connections
s.
LEVEL OF PROTECTION
FROM WA
FCC ID: ATL-TS100
TER INTRUSION
X7
3. Power On and Pairing
C.
TB100 earbuds will automatically turn on
whenever removed from the charging case.
d. Wait for successful pairing
a. Go to Settings > Bluetooth.
1. To charge your earbuds
< Settings Bluetooth
Bluetooth
b. Turn on Bluetooth.
MY DEVICES
Not Connected
i
iLuv TS100
c. Scan for and select "iLuv TS100".
The TS100 earbuds are rated IPX6 Waterproof
which means that the earbuds can resist high
pressure water sprays however they shouldn't
be submerged under water for a long period
of time.
X7
2. Wear Earbuds
1. Before Using
The TS100 earbuds will provide a playtime of 20
hours. Get up to 8 hours on a single charge and an
additional 12 hours from the included charging
case. For a quick charge, place both earbuds back
into the charging case for 20 minutes and get 2
hours of listening time.
B.
Charging case
• LED will indicate the Battery level of the case
whenever connected to a charger
• All LEDs will be lit when charging is complete
• LED will display the battery level of the case for
4 seconds when the earbuds are placed back in
the case
3. Checking the Battery Level
Please charge your TS100 before use. Simply
take the earbuds out of the charging case and
insert them into your ears. The earbuds will
automatically power on and become ready to
pair to your device.
CHARGING
BATTERY LIFE
TROUBLESHOOTING
POWER ON AND PAIRING
WHAT’S INCLUDED
FAQ (FREQUENTLY ASKED QUESTIONS)
TROUBLE SHOOTING: When the battery is completely drained while not in use for a long period of time, try
Lorsque la pile est complètement épuisée parce qu’elle n’a pas été utilisée depuis longtemps, DÉPANNAGE :
après quelques minutes.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and(2) this device must accept any interference received,
including interference that may cause undesired operation.
Hereby, iLuv Creative Technology declares that the radio equipment type Bubble Gum Air is
Printed in China.
ONE YEAR LIMITED WARRANTY
GARANTIE LIMITÉE D’UN AN
TWO YEARS LIMITED WARRANTY
GARANTIE LIMITÉE DE DEUX ANS
EUROPEAN UNION
A.
Both earbuds are marked with a L or R to indicate
the appropriate ear side; earbuds are dierently
angled to fit either the left or the right ear.
The proper fit will ensure the best sound quality.
Insert the earbud into your ear and rotate slightly
clockwise (as shown in image below); adjust for
comfort.
LISTENING TO MUSIC
A. Earbuds
• Earbud LEDs will indicate charge status while
being charged in the case
• When fully charged, earbud LEDs will
B. "
Please pair to your device
" prompt will be heard
through the earbud if the previously paired device
is not found.
Once paired, open a music app on your device to
Play/Pause music, adjust Volume Up/Down and
Track Next/Previous.
2. To charge your case
With the provided micro USB Cable, plug the
micro USB port into the charging port located
on the backside of the charging case. Then
plug the USB side of the Micro USB Cable into
a standard USB Charger or port.
Place both earbuds into the charging case
whenever not using; Make sure to keep the lid
closed.
POWER ON/OFF
To conserve battery, the earbuds will automatically
power o when it's out of range from your device for
more than 5 minutes.
** Listening time measured on a single charge at an
80% volume level
Place both earbuds into the charging case and
leave the lid closed; take earbuds out of charging
case after 15 seconds.
This simple trick will resolve most problems which
include but isn't limited to L/R channel
disconnection or pairing/connectivity issues with
devices.
Earbud
12 hrs
1.5 hrs
8 hrs**
1.5 hrs
2 hrs
Listening Time
Charging Time
Play time after
charged for
20 minutes
Charging Case
1. Power On the Earbuds
The earbuds will automatically power on and
connect to the previously paired device whenever
taken out of the charging case.
To power on the earbuds
without the charging
case, hold the touch area
of both earbuds for 2
seconds until a "Power on"
prompt is heard.
To power o the earbuds,
place both earbuds into
the charging case and
close the lid.
Please hold the touch area
of either earbuds for 5 seconds
to power o the earbuds
without the charging case;
a " Power off " prompt will
be heard. Please make
sure that all music/audio
is paused before
powering o.
"Power on" prompt will be heard through the
earbud within the first few seconds of wearing.
in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the follow internet address : www.iluv.com
charging it a few times as it will
tentez de la charger quelques fois
Simply touch the touch area of either earbud to Play/
Pause music. Double touch either earbud to receive
phone calls.
Touch and hold the touch area of of the Right/Left
earbud to turn Up/Down the volume.
Playtime will vary by the volume level, type of audio
and connection status.
3. How can I control the volume of the music or call?
4. What will aect the total playtime?
1. How can I power on/o the TS100?
The earbuds will automatically power on when
removed from the charging case and power o when
placed back into the charging case. Whenever the
charging case isn’t near the earbuds, hold the touch
area of both earbuds for 2s to Power on and hold the
touch area of either earbud for 5s to Power o.
2.
How can I play/pause music or receive calls?
1. Answer Call
2. Hang Up Call
Note: Availability of Google Assistant voice control
features will vary by dierent Android Phone
models.
Touch area is located directly on the center of the
earbud.
To activate Siri with the TS100, triple touch the
touch area of either the Right or Left earbud; a
sound prompt "Du" will be heard from both
earbuds.
HANDS-FREE CALLING SIRI & GOOGLE ASSISTANT VOICE CONTROL
Please follow the instructions below to answer/
hang up/ reject calls.
You can Play/Pause your music by simply touching
the touch area of either earbud once; a sound
prompt "Du" will be heard from both earbuds.
You can adjust the Volume Up/Down by touching and
holding the touch area of the earbuds. The Right earbud
will adjust the Volume Up and the Left earbud will
adjust the Volume Down; a sound prompt "Du..du..du.."
will be heard from both earbuds.
You can skip tracks by double touching the touch area
of the earbuds. The Right earbud will skip to the next
track and the Left earbud will skip to the previous track;
a sound prompt "Du" will be heard from both earbuds.
True Wireless Stereo
Earbuds with Charging Case
(Ver 2.1)
User Manual
TS100
5
.
1
Turn on Bluetooth on your device
3. Reject Call