Ear Clip Headset with Bluetooth® Wireless Technology Instruction Manual i212 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit http://www.i-Luv.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal. The materials are recyclable as mentioned in its marking.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 USER SAFETY GUIDE FCC Notice (USA) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Refer to 47 CFR Sec. 15.19.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 USER SAFETY GUIDE About Electromagnetic Interference (EMI) - Continued • • • If you use any personal medical device, such as a pacemaker, please consult the manufacture of your medical device to determine if it is adequately shielded from EMI. Your physician might assist you in obtaining this information. Please turn off this device if you are instructed to do so, especially on an airplane or in a hospital.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 TABLE OF CONTENTS GETTING STARTED Introduction. …..………..…………………………………………………………..…… What’s Included …………………………………..……………………………………… What is Bluetooth wireless technology? ................................................................ Charging the headset ………………………………………..………………………… Notes on charging…………………………………………….
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 GETTING STARTED iLuvTM Stereo Ear Clips with Bluetooth® Wireless Technology Experience the freedom of Bluetooth wireless technology with i212 stereo ear clip headphones. You can listen to music from an audio device featuring Bluetooth wireless technology, and you won’t even miss a call while you’re at it. Music is important to people, but so is answering your mobile phone when you get a call.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 GETTING STARTED What is Bluetooth wireless technology? Bluetooth wireless technology is a short-range wireless communication technology intended to replace the cables connecting electronic devices while maintaining the high level of security.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 GETTING STARTED Charging the Headset Before the first use of this headset, it is recommended to fully charge the headset. To do so, follow the instructions below: 1. Open the mini USB port dust cover (on the bottom of the right ear clip) before attaching USB cable. 2. Attach other end of cable to the computer USB port. Computer 3. The red light will be on when connected.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 OPERATING INSTRUCTIONS Location of Controls Turning On/Off the i212 To turn on the i212, press and hold the Multi-function button on the headset for approximately three (3) seconds. A blue light will blink near the Multi-function button on the headset . Additionally, the i212 headset will make a high-pitched beep. The blue blinking light (and beep from the headset) indicates that the device has been turned on.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 OPERATING INSTRUCTIONS Pairing i212 with your Mobile Phone or Audio Device Before using this headset, make sure that it is paired with a mobile phone and audio devices with Bluetooth wireless technology. To pair with such a device, follow the instructions below: 1. Please make sure the headset is turned off. To Turn off i212 if it is currently turned on then press the Multi-Function button for approximately five (5) seconds.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 OPERATING INSTRUCTIONS Pairing i212 – Continued 6. Enter the password: “0000.” The phone or device will display a confirmation message after a few seconds. Once the headset is correctly paired, the light will stop blinking red and blue alternately, and will blink blue only. 7. Repeat this procedure each time an additional phone or audio device needs to be paired with the i212. 8.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 OPERATING INSTRUCTIONS How to Wear the i212 Ear Clip Headphones The i212 stereo ear clip headphones are designed for a comfortable fit on the ears. The ear clip with the Multi-function button and controls should be worn on the right ear, while the other ear clip is worn on the left. 1. Holding the ear clip in one hand, use one finger to push the ear rest out to extend it. 2. Place the ear clip over your ear and release the ear rest.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 OPERATING INSTRUCTIONS Listening to Music - Continued • For connection to an audio device without Bluetooth wireless technology using the wireless audio dongle adapter (Not Included). a. Pair the i212 with the Audio Transmitter dongle (Not Included), if you have not done so already. b. Switch the i212, the dongle and the audio device ON.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 OPERATING INSTRUCTIONS How to Control Music Playback - Continued • Volume Up / Down: To increase the volume, press the Volume (+) button. To decrease the volume, press the Volume (-) button. Making a Call The i212 is designed to allow a user to place and answer calls while listening to music wirelessly with Bluetooth wireless technology.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 OPERATING INSTRUCTIONS Answering a Call It is very simple to answer a call with the i212, whether listening to music or already talking on the phone. 1. An incoming phone call will be indicated by a ring after which the blue light on the i212 will blink. Press the Multi-function button once to answer the call. 2.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 TROUBLESHOOTING GUIDE 1. The headset does not work with my mobile phone. o Be certain that your mobile phone is equipped with Bluetooth wireless technology. This headset will only work with such mobile phones. Additionally, your mobile phone must be paired with the headset BEFORE all other pairing. 2. There is interference on the headset with my phone or music playing devices.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 TROUBLESHOOTING GUIDE o 6. 7. Make sure the Bluetooth device you are using is Bluetooth Version 1.2 or higher for stable connectivity. (Some of the V1.1 devices might not be fully compatible. Make sure to check your Bluetooth devices manual for compatibility issues). Can not pair with stereo headset with Bluetooth technology made by other manufacturers.
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006 PRODUCT SPECIFICATIONS • Speaker Driver: 30mm NdFeB speaker driver • Frequency Response: 20Hz – 20kHz (receiving) • SPL: ≤ 118dBA • Bluetooth Version: V1.2 • Bluetooth Profile: HSP, HFP, A2DP, AVRCP • Standby Mode: < 200hrs • Listening Mode: < 14hrs (@ max. volume) • Talking Mode: < 14hrs (@ max.
TEL: 516-626-7188 FAX: 516-626-7105 website: www.i-Luv.com iLuv is a trademark of jWIN Electronics Corp. Features and specifications are subject to change without prior notification. iPod is a trademark of Apple Computer, Inc. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc and any use of such marks by jWIN Electronics Corp. is under license. Mobile phone and iPod not included in this package. © 2006 jWIN Electronics Corp. All rights reserved.
