VibroSaver User Manual (Ver 1.1) Manuel utilisateur (Ver 1.1) Wake up in silence o Fo no r p t p re rin rev t w ie ith w o th nly is fil e Se réveiller en silence User Manual Link for Each Language Lien du Manuel de l'utilisateur pour chaque langue Please visit VibroSaver.com > "User Manual" menu for User Manual in your language. Allez sur VibroSaver.com > menu « Manuel de l'utilisateur » pour accéder au manuel de l'utilisateur dans votre propre langue.
1. App Download 3. App Registration Télécharger l'application Inscription application There are two ways to register: text or email. Attention Il y a deux façons de s'inscrire : par texte ou pas e-mail. Attention Make sure your phone is connected to 2.4 GHz Wi-Fi, not 5 GHz during setup. ( VibroSaver does not support 5 GHz Wi-Fi ) “Register” 1. Click Cliquer sur « Inscription » country, input your 2. Select mobile number or email address.
4. Add VibroSaver 3. Input Wi-Fi password. Click “Confirm” 4. Connecting through Wi-Fi Saisissez le mot de passe de votre réseau Wi-Fi. Cliquer sur « confirmer » Ajouter VibroSaver Connexion par le Wi-fi VibroSaver needs connection to WiFi. Plug in the AC Adapter and set up per the following setup instructions. VibroSaver a besoin d'une connexion pour accéder au Wi-Fi. Branchez l'adaptateur secteur et configurez VibroSaver selon les instructions de Standard setup Configuration standard 1 1.
To make Blue light flash Pour que le voyant bleu clignote If the blue light would not flash on your VibroSaver in section 4.2, follow the instructions below. Si la lumière bleue ne clignote pas sur votre VibroSaver conformément à ce qui est décrit à la section 4.2, suivez les instructions ci-dessous. Click “Press to make Blue light flash”. Follow the 6 steps. Click “Next”. 1 Plug in AC adapter Brancher l'adaptateur secteur Cliquer sur « Appuyer pour que le voyant bleu clignote ». Suivre les 6 étapes.
Setup in Manual Mode 3. Input WiFi password. Click “Confirm” 4. Click “Go to Wi-Fi setting page” 5. Select “VibroSaver” Configuration en mode manuel Saisir le mot de passe du Wifi. Cliquer sur « Con rm » Cliquer sur « Aller à la page de configuration Wifi » Choisir « VibroSaver » If you still have trouble connecting your VibroSaver to Wi-Fi, try the "Manually" setup instruction.
Reset for Manual Mode Réinitialisation pour mode manuel If you still failed to setup "Manually", follow this "Reset for Manual Mode" instruction. Si vous n'arrivez toujours pas à configurer « manuellement », suivez ces instructions « réinitialisation pour mode manuel ». 3 Press & Hold “Snooze” button 2 Slide to power “ON” Faire glisser pour mettre en position « ON » Maintenir enfoncé le bouton « veille » Click “Reset for Manual Mode”. Follow the 7 steps.
5. Alarm Setup 6. Alarm Snooze & Alarm Off Configuration de l'alarme Alarme en veille & Alarme désactivée VibroSaver allows you to set up multiple alarms such as weekday/weekend/nap time with preferred vibration level: Normal or Strong. Avec VibroSaver, vous pouvez fixer des alarmes multiples telles que jour de semaine/week-end/sieste avec un niveau de vibration préféré : normal ou fort. 1. Click “Add Alarm” Cliquer sur « Ajouter alarme » alarm time, alarm name, 3. Alarm is set! 2.
7. Sharing with Family & Friends Partager avec la famille & les amis Family member Membre de la famille Family member needs to download and register the VibroSaver App before invitation by the owner Invite your family members to join your VibroSaver with their own VibroSaver Accounts. They'll have full access to control individual alarm add/delete, alarm set up on/off, Vibrate Now on/off, or add products. They'll also be able to use Amazon Alexa or Google Assistant.
8. Vibrate Now Vibrer maintenant “Vibrate Now” function allows a family member to wake up the owner immediately from anywhere. 3. Snooze or turn off the ‘Vibrate Now’ alarm Répéter ou désactiver l’alarme «Vibrer Now» Grâce à la fonction « Vibrer maintenant », un membre de la famille peut immédiatement réveiller le détenteur n'importe où qu'il se trouve.
9. Group/Ungroup/Wakeup All Grouper/Dissocier/Réveiller tous If an owner has multiple VibroSavers, he/she can make them into a Group. It allows him/her to set up alarms or activate "Vibrate Now" to wake up all grouped units. Ungroup Dissocier 1. Select the group from the VibroSaver list 2. Click menu icon in the top right corner 3. Click "Ungroup" 4.
Wake up All at Once with a Scheduled Alarm Réveiller tout le monde en même temps avec une alarme programmée VibroSaver group from the list 1. Click Cliquer sur un groupe VibroSaver à partir de la liste “Add Alarm” 2. Click Cliquer sur « Ajouter alarme » alarm time, alarm name, 3. Set repeat and vibration strength is set! 4. Alarm L'alarme est définie.
10. Works with Alexa/Google Assistant Fonctionne avec Alexa/Assistant Google Works with Google Assistant Fonctionne avec Assistant Google for more detail information scan this QR code With the VibroSaver voice command function, you can simply tell Alexa/Google Assistant to turn alarm on/off or set the vibration strength level.
12. Where to Place VibroSaver Où placer VibroSaver Place under your pillow or pillowcase or even overhead in a safe location. Placez sous votre oreiller ou taie d'oreiller ou même en hauteur dans un endroit sûr. Place VibroSaver (1) under the pillow, (2) inside the pillowcase, or (3) overhead. Placer VibroSaver (1) sous l'oreiller, (2) dans la taie d'oreiller, ou (3) au-dessus de vous. WARNING: AVERTISSEMENT: STRANGULATION HAZARD! - Keep cords out of the reach of children (more than 3 feet away).
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.